Shop

APPF Edition — Hybrid Nylon/Calfskin Strap

The Audemars Piguet Code 11.59 series presents one of the most complex case geometries in modern horology, and the APPF (APP Factory) execution of the Tourbillon Openworked 26600CR stands as a rigorous technical achievement. This specific release is notable for successfully replicating the notoriously difficult double-curved sapphire crystal, which curves vertically on the exterior while remaining domed on the interior. Combined with a precisely milled octagonal mid-case, it offers the correct optical depth required for an openworked dial.

At the core of this model is a custom Caliber 2948 manual-winding clone movement. Unlike standard open heart modifications, this caliber features a genuine 60-second flying tourbillon escapement positioned at 6 o’clock, alongside a visible mainspring barrel at 12 o’clock. The vertical alignment and tri-tone grey bridge treatments closely mirror the genuine architecture. Power reserve is strictly rated at approximately 36 hours, requiring disciplined daily winding.

The 41mm dual-tone case is machined to a precise 13.9mm thickness, weighing in at a highly wearable 80.6g. The grey openworked dial features sharp, multi-layered bridges with alternating brushed and polished bevels. The hybrid nylon and calfskin strap integrates cleanly into the skeletonized lugs, securing with a standard AP folding clasp.

• Movement: Custom Caliber 2948 Clone — Approximately 36 hours
• Case Material: Dual-tone steel/alloy architecture, 41mm diameter, 80.6g weight
• Bezel: Ultra-thin round profile, polished finish
• Crystal: Double-Curved Sapphire Crystal with high-clarity AR coating
• Bracelet: Hybrid Nylon/Calfskin with AP folding clasp
• Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece appeals to collectors who appreciate avant-garde horological architecture and the mechanical visual theater of a flying tourbillon. It requires careful manual winding and is best suited for controlled wear rather than rigorous daily use.

ZF Edition — Titanium Integrated Bracelet

The ZF iteration of the Royal Oak 15202IP represents a definitive technical benchmark, prioritizing precise case geometry and weight distribution. By utilizing solid titanium, this assembly achieves a verified weight of exactly 88.4g, capturing the featherweight ergonomics of the genuine reference while strictly maintaining the critical 8.4mm ultra-thin profile.

Powering the watch is the custom Clone Calibre 2121, engineered with a bespoke ultra-thin architecture rather than relying on a standard decorated deck. This allows the movement to clear the strict 8.4mm case limit while retaining the correct semi-quickset date function via 9-12 crown rotation. Power reserve is rated at approximately 36 hours.

The exterior features alternating brushed titanium surfaces contrasted against a highly polished bezel, mimicking the 950 platinum found on the genuine article. The dial executes the signature Smoked Blue Petite Tapisserie pattern, exhibiting a correct gradient fade to a deep navy periphery beneath a clear sapphire crystal.

• Movement: Super Clone Calibre 2121 — Approximately 36 hours
• Case Material: Solid Titanium (39mm, 88.4g verified)
• Bezel: Polished Titanium (mimics genuine platinum finish)
• Crystal: Sapphire with correct AR coating
• Bracelet: Integrated Titanium with alternating brushed/polished finishing
• Water Resistance: 50m stated — professional pressure test recommended before swimming

Ideal for collectors who appreciate the distinct tactile feedback of a lightweight titanium build. This piece slides effortlessly under a dress cuff while maintaining a strong horological presence.

APSF Edition — Integrated Stainless Steel Bracelet

APSF’s execution of the Royal Oak 15400 represents a significant technical benchmark in the replica market, specifically regarding case geometry and bracelet integration. By achieving the verified 9.2mm thickness and 172.5g weight, this piece closely mirrors the physical presence of the genuine article.

Powered by the fully integrated Super Clone Cal. 3120, this caliber departs from older decorated Miyota bases. It features a meticulously engraved 22K-style gold rotor, correct balance wheel positioning, and functional shock absorbers, offering reliable mechanical stability.

The 41mm stainless steel case showcases highly accurate brushed and polished alternating finishing across the octagonal bezel and integrated lugs. The white “Grande Tapisserie” dial exhibits crisp guilloché work, maintaining strict adherence to genuine dial proportions.

• Movement: Super Clone Cal. 3120 — Approximately 36 hours
• Case Material: Premium Stainless Steel, 41mm diameter, 172.5g weight
• Bezel: Stainless steel with correct brushed and polished chamfers
• Crystal: Scratch-Resistant Sapphire with colorless AR coating
• Bracelet: Integrated stainless steel with AP folding clasp
• Water Resistance: 50m Stated — professional pressure test recommended before swimming

This reference suits the purist seeking the classic 41mm Royal Oak proportions before the transition to the 15500 series. Its robust caliber and precise case tolerances make it a reliable cornerstone for mechanical evaluation.

APS Factory Edition (Integrated Rose Gold Plated Bracelet)

• Movement: Calibre 4401 Super Clone (True-to-Gen subdial spacing & full chrono functionality)
• Case & Band: 41mm x 12.0mm, 18K Rose Gold Plated Stainless Steel (166g)
• Crystal: Scratch-Resistant Sapphire with Anti-Reflective coating
• Power Reserve: Approximately 36 hours

✔ 100% Customs Clearance Guaranteed. Free replacement if seized.

APSF Edition — Integrated Rose Gold Plated Bracelet

APSF’s iteration of the Royal Oak Chronograph 26240OR represents a significant milestone in replica architecture, successfully housing a fully integrated movement within the genuine-spec 12.0mm case profile. Previous market iterations relied on modified 7750 calibers, resulting in incorrect sub-dial spacing and bloated case geometries that immediately signaled their non-genuine status. This specific release resolves those historical geometric flaws.

The Super Clone Calibre 4401 dictates this model’s structural accuracy. It features a fully functional column-wheel chronograph mechanism with sweeping center seconds and the correct 3-6-9 sub-dial layout. Power reserve is rated at approximately 36 hours. The movement’s architecture allows the date wheel to sit flush against the dial, eliminating the sunken date issue prevalent in older replicas.

Constructed from 316L stainless steel with a rose gold plating, the 41mm case exhibits the correct alternating brushed and polished finishing on the octagonal bezel and integrated bracelet links. The white Grande Tapisserie dial captures the intricate guilloché pattern of the genuine, complete with accurately applied hour markers and hands.

• Movement: Super Clone Calibre 4401 — Approximately 36 hours
• Case Material: Rose Gold Plated 316L Stainless Steel, 41mm diameter, 166.6g weight
• Bezel: Rose Gold Plated 316L with polished hexagonal screws
• Crystal: Scratch-Resistant Sapphire with Anti-Reflective Coating
• Bracelet: Integrated Rose Gold Plated 316L, alternating brushed/polished finish, AP double deployant clasp
• Water Resistance: Stated 50m — professional pressure test recommended before swimming

This piece serves the collector who requires correct chronograph functionality and precise case proportions without the premium of the genuine article. It is best suited for environments where an integrated sports watch is structurally appropriate.

APS Factory Edition (Integrated Stainless Steel Bracelet)

• Movement: APS Calibre 3120 Super Clone (28,800 vph)
• Case & Band: 316L Stainless Steel (37mm diameter x 9.4mm thickness)
• Crystal: Glareproofed Sapphire Crystal
• Power Reserve: Approximately 36 hours

✔ 100% Customs Clearance Guaranteed. Free replacement if seized.

APSF Edition — Integrated Stainless Steel Bracelet

The APSF Audemars Piguet Royal Oak 15510ST represents the current horological benchmark for this reference, heavily debated and praised within collector circles for its precise 10mm case profile. By updating the dial architecture to match the 15510 specifications—most notably the removal of the applied ‘AP’ logo in favor of the elongated Audemars Piguet signature—APSF has delivered a highly accurate representation of the modern Royal Oak.

At the core of this piece is the fully integrated Super Clone Calibre 4302. Unlike older decorated Miyota movements, this caliber features the correct balance wheel positioning at 11 o’clock and a skeletonized 50th-anniversary-style winding rotor. The power reserve yields approximately 36 hours of reliable performance.

Machined from premium 316L stainless steel, the case and integrated bracelet exhibit the critically scrutinized alternating brushed and polished finishing, achieving a verified weight of exactly 170.1g. The ‘Grande Tapisserie’ dial captures the deep forest green hue of the genuine article, shifting dynamically under direct lighting.

• Movement: Super Clone Calibre 4302 — Approximately 36 hours
• Case Material: 316L Stainless Steel, 41mm diameter, 170.1g weight
• Bezel: 316L Stainless Steel with polished chamfers
• Crystal: Scratch-resistant Sapphire with Colorless AR Coating
• Bracelet: Integrated 316L Steel, alternating finish, double deployant clasp
• Water Resistance: Factory stated 50m — professional pressure test recommended before swimming

This reference appeals to collectors seeking the refined aesthetics of the modern Royal Oak without the bulk of the Offshore line. Its exact 10mm profile ensures it slips effortlessly under a tailored cuff.