Shop

APSF Edition — Integrated Steel Bracelet

The APSF Audemars Piguet Royal Oak 15400 represents a definitive benchmark in contemporary replica horology, primarily due to its achievement of the genuine-specification 9.2mm case thickness. By engineering a true clone movement from the ground up rather than relying on decorated base calibers, APSF resolves the historical dimensional flaws that plagued earlier iterations of this reference.

At the core of this reference is the custom Caliber 3120 Super Clone. This integrated architecture accurately positions the balance wheel at the correct 7 o’clock position and operates at a stable 28,800 vph beat rate. The movement delivers reliable daily performance with a power reserve of approximately 36 hours, ensuring consistent amplitude across varying states of wind.

The 41mm case is machined from 316L stainless steel, weighing in at a verified 173.4 grams, providing a substantial and balanced wrist presence. The dial captures the elusive boutique blue tone of the genuine piece, complementing the crisp execution of the Grand Tapisserie pattern. APSF’s renowned alternating brushed and polished finishing on the integrated bracelet links ensures the dynamic light play characteristic of the Royal Oak design.

• Movement: SA3120 Super Clone — Approximately 36 hours
• Case Material: 316L Stainless Steel, 41mm diameter, 173.4g
• Bezel: 316L Stainless Steel with brushed finish and polished chamfers
• Crystal: Scratch-resistant Sapphire with Colorless AR
• Bracelet: Integrated 316L Steel, alternating finish, double deployant clasp
• Water Resistance: 50m stated rating — professional pressure test recommended before swimming

This piece is engineered for the collector who demands exacting case proportions and a fully integrated movement architecture. It serves as a highly capable daily wearer that honors the technical specifications of the original reference.

THB Factory Edition — Integrated 18K Gold Plated Bracelet

The Royal Oak 15407 Openworked represents a significant horological challenge for replica manufacturers due to its exposed gear train and dual balance wheel architecture. This THB Factory execution addresses previous market shortcomings by introducing a custom-developed integrated movement that properly positions the balance wheel at 8 o’clock, rather than relying on decorative plates over a standard base caliber.

Powered by the custom Calibre 3132 clone, this mechanism showcases fully functional golden gears and meticulously brushed bridges operating in synchronized harmony. The movement maintains a stable beat rate with an operational power reserve of approximately 36 hours. By utilizing this integrated architecture, THB Factory achieves the necessary tolerances to match the genuine ultra-thin case profile.

Constructed from stainless steel with an 18K gold PVD plating, the case measures an exacting 9.6mm in thickness and weighs 166.3g. The classic alternating brushed and polished finishing on the integrated bracelet links captures the signature light play of Gerald Genta’s design, while the skeletonized dial offers high-contrast legibility with dark anthracite accents against the gilded movement plates.

• Movement: Custom Calibre 3132 Clone — Approximately 36 hours
• Case Material: 18K Gold Plated Stainless Steel, 41mm diameter, 166.3g
• Bezel: 18K Gold Plated, brushed alternating finish with polished screw heads
• Crystal: Scratch-Resistant Sapphire with Anti-Reflective Coating
• Bracelet: 18K Gold Plated Integrated Bracelet, AP folding clasp
• Water Resistance: 50m Stated Rating — professional pressure test recommended before swimming

This reference suits collectors who appreciate the technical aesthetic of an openworked dial but demand accurate case dimensions. It serves as a highly capable mechanical alternative for those evaluating the horological merit of modern skeletonized architectures.

APS Factory Edition (Integrated Rose Gold Bracelet)

• Movement: Super Clone Calibre 4401 with fully functional chronograph
• Case & Band: 41mm 18K Rose Gold Plated / 11.8mm True-to-Gen Thickness
• Crystal: Scratch-resistant Sapphire with Anti-Reflective Coating
• Power Reserve: Approximately 48 hours

✔ 100% Customs Clearance Guaranteed. Free replacement if seized.

THB Factory Edition — Full Ceramic Bracelet

The THB Factory execution of the Royal Oak 15400 in full black ceramic represents a significant technical milestone in replica case manufacturing. Rather than relying on PVD-coated steel, THBF utilizes solid zirconium oxide ceramic, achieving an impressive overall weight of exactly 134.6 grams. The factory has successfully maintained an ultra-thin 9.6mm case profile, demonstrating advanced machining tolerances previously unseen in ceramic replicas of this reference.

Powering this reference is the Calibre 3120 Super Clone movement, sharing architectural DNA with APSF’s renowned calibers. Unlike older modified Miyota base movements, this direct-drive clone features a genuine gear train arrangement and a bidirectional winding rotor. Operating with near-silent efficiency, the movement provides approximately 36 hours of power reserve.

The solid ceramic construction extends from the 41mm case through the integrated bracelet, featuring alternating brushed surfaces and highly polished chamfers. The Grande Tapisserie dial presents a deep black tone with accurate raised square texturing, complemented by white gold-plated hour markers.

• Movement: Calibre 3120 Super Clone — Approximately 36 hours
• Case Material: Solid Zirconium Oxide Ceramic, 41mm, 134.6g
• Bezel: Solid Black Ceramic, accurate brushed finishing
• Crystal: Sapphire with edge-to-edge clarity and AR coating
• Bracelet: Integrated Full Black Ceramic with titanium deployant clasp
• Water Resistance: 50m Stated — professional pressure test recommended before swimming

This phantom edition is suited for collectors seeking the scratch-resistant properties of solid ceramic without compromising on the horological accuracy of the 3120 clone caliber. It commands a distinct, stealth-oriented presence on the wrist.

APS Factory Edition — Frosted Integrated Bracelet

The APSF 26240BC represents a notable technical achievement in replica horology, specifically regarding the execution of the Florentine frosted finish. Achieving the micro-hammered texture without compromising the structural integrity of the integrated bracelet links has historically challenged manufacturers, but APSF delivers a uniform light-refracting surface that closely mirrors genuine tolerances.

At the core of this reference is the 1:1 clone Calibre 4401. Unlike older iterations that relied on bulky Asian 7750 modules, this integrated chronograph movement features a functional column wheel and permits the correct sub-dial spacing. Power reserve is rated at approximately 36 hours, maintaining stable amplitude across its winding cycle.

The 41mm case is machined to an exact 12.0mm profile, weighing in at a verified 168.2g to provide substantial wrist presence. The gray Grande Tapisserie dial exhibits precise square depth and sharp typography, avoiding the muddy printing seen in lesser tiers.

• Movement: 1:1 Clone Calibre 4401 — Approximately 36 hours
• Case Material: Stainless Steel (Frosted Finish), 41mm diameter, 168.2g weight
• Bezel: Frosted stainless steel with polished hexagonal screws
• Crystal: Scratch-resistant sapphire with colorless AR coating
• Bracelet: Integrated frosted stainless steel with AP double deployant clasp
• Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece is engineered for the discerning collector seeking the tactile and visual complexity of the frosted finish paired with correct mechanical dimensions. It commands attention without relying on traditional high-polish techniques.

APS Factory Edition (Premium Rubber Strap)

• AP Caliber 3126 Super Clone: True 1:1 architecture resolving the sunken date flaw and matching gen 15.6mm thickness.
• Case & Band: 44mm 18K Rose Gold Plated Steel (Heavy 202.1g) & Black Ceramic Bezel, on Black Rubber.
• Crystal: Glareproofed Scratch-resistant Sapphire.
• Power Reserve: Approximately 48 hours

✔ 100% Customs Clearance Guaranteed. Free replacement if seized.

APS Factory Edition (Integrated Frosted Bracelet)

• Movement: Caliber 3120 Super Clone (True 1:1 Architecture)
• Case & Band: 41mm x 9.6mm Hammered Frosted Stainless Steel
• Crystal: Scratch-Resistant Sapphire with Anti-Reflective Coating
• Power Reserve: Approximately 36 hours

✔ 100% Customs Clearance Guaranteed. Free replacement if seized.

ZF Edition (Integrated Steel Bracelet)

• Movement: Custom Calibre 2121 Clone with decorated rotor (Ultra-Thin 2-Hand format)
• Case & Band: 39mm 316L Stainless Steel (Simulated White Gold finish) with iconic integrated bracelet
• Crystal: Scratch-proof Sapphire with Anti-Reflective coating
• Power Reserve: Approximately 36 hours

✔ 100% Customs Clearance Guaranteed. Free replacement if seized.