Sea-Dweller Super Clone

126600 Single Red & Deepsea 136660 D-Blue — Ring Lock System & Clone Cal.3235

The Rolex Sea-Dweller super clone collection — spanning the 43mm Sea-Dweller and 44mm Deepsea architectures. Each reference is powered by clone Cal. 3235 and forged from 904L Oystersteel. The Sea-Dweller line is defined by its robust proportions, Cerachrom ceramic bezels, helium escape valve, and the Ring Lock System on Deepsea references — engineering features that distinguish it from the Submariner at a structural level.

Sea-Dweller & Deepsea Super Clone References

Sea-Dweller 43 126600 “Single Red” — 43mm Oystersteel case, clone Cal. 3235. Correct red “Sea-Dweller” dial text referencing the original 1967 Single Red vintage designation. Cyclops lens over the date, fully brushed Oyster bracelet with Glidelock extension, 1,220m water resistance rating
Sea-Dweller 43 126603 Rolesor — 43mm Yellow Rolesor configuration (Oystersteel and 18k yellow gold), clone Cal. 3235. Black dial with gold-tone dial text, matching yellow gold centre links on the Oyster bracelet
Deepsea 136660 “D-Blue / James Cameron” — 44mm Oystersteel case with titanium caseback, clone Cal. 3235. The current-generation Deepsea. D-Blue gradient dial transitioning from deep blue to black at the base, neon green “Deepsea” text. Ring Lock System, 5.5mm domed sapphire crystal, 3,900m water resistance. No Cyclops lens — the massive crystal does not accommodate the lens without compromising pressure integrity. Slimmer bezel profile and larger date window versus the previous 126660
Deepsea 126660 “D-Blue / James Cameron” — 44mm predecessor reference, also clone Cal. 3235. Retains the Fliplock diver’s extension on the Oysterlock clasp. Available alongside the 136660 on the pre-owned market at competitive pricing
Deepsea 136660 / 126660 Black Dial — Same 44mm architecture with classic matte black dial in both current (136660) and previous-generation (126660) configurations

Collector Notes: Ring Lock System & Helium Escape Valve

The primary inspection points on a Deepsea super clone are the Ring Lock System engraving, the helium escape valve profile, and the D-Blue gradient execution. The inner rehaut ring on Deepsea references carries the “ORIGINAL GAS ESCAPE VALVE” and “RING LOCK SYSTEM” text in deep black-filled engraving. Shallow or misaligned engraving — the most common Deepsea replica defect — is evaluated under magnification before each piece is approved.

The helium escape valve at 9 o’clock must sit flush against the polished case flank with a matte-finish titanium core. Protruding or recessed HEV is the second most cited defect on Deepsea replicas.

On D-Blue dial variants, the gradient must transition smoothly from deep blue at the 12 o’clock zone to flat black at the base of the dial without a visible horizontal band at the colour boundary. Every Sea-Dweller’s bezel click resistance, dial printing, and Glidelock clasp tolerance is evaluated through our pre-shipment quality control process before dispatch.

7 Products

Filters

Rolex Super Clone Watches 1:1 Deepsea Sea Dweller Gradient Blue Dial m126660-0002 3235 Movement
Original price was: $1,050.00.Current price is: $850.00.
C+ Factory Edition — 904L Oystersteel Bracelet

The C+ Factory Deepsea 126660 stands as a notable assembly in the heavyweight replica category, utilizing AR-grade case components to achieve the exact 221.1g mass of the genuine article. It is widely recognized on collector forums for its precise 17.8mm profile and the implementation of a functional Grade 5 titanium caseback.

Powered by a clone 3235 caliber, the movement features correct bidirectional winding and a date wheel with accurate, magnification-free viewing under the domed crystal. While it does not utilize the Dandong architecture found in other factories, this caliber provides reliable daily performance and hacking seconds functionality.

Constructed from solid 904L Oystersteel, the massive 44mm case houses a gradient dial with an accurate transition from brilliant blue to bottomless black. The 5.5mm domed sapphire crystal works in tandem with the nitrogen-alloy steel compression ring to replicate the genuine watch’s distinct structural depth.

Movement: Clone Caliber 3235 — Approximately 36 hours

Case Material: 904L Oystersteel, 44mm diameter, 51.8mm lug-to-lug, 221.1g

Bezel: Black Cerachrom ceramic insert with platinum-dusted markers

Crystal: 5.5mm domed sapphire without Cyclops lens

Bracelet: 904L Oystersteel with Glidelock extension system

Water Resistance: Stated 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This specific build caters to collectors who require the substantial wrist presence and exact dimensions of the James Cameron tribute model. Its massive proportions make it highly specific to larger wrists or those seeking uncompromising dive watch architecture.
Add to cart
Rolex Super Clone Watches 1:1 Sea Dweller M126600-0002 3235 Movement
Original price was: $1,050.00.Current price is: $850.00.
VSF 50th Anniversary Edition — Oyster Bracelet

VSF’s iteration of the 50th Anniversary Sea-Dweller 126600 stands as the current benchmark for 43mm Rolex divers within the replica community. By matching the genuine 195.3g weight and 15.3mm thickness, this release resolves the dimensional discrepancies found in earlier factory attempts.

Inside sits the highly regarded Dandong VS3235 clone caliber, renowned for its architectural accuracy and reliability. It features the correct clockwise time-setting direction and an instant date change mechanism at midnight, mirroring the genuine movement’s behavior precisely.

Forged from 904L Oystersteel, the 43mm Oyster case balances well on the wrist thanks to the 22mm lug width. The gloss black dial accurately captures the iconic single red SEA-DWELLER text, protected by a sapphire crystal featuring the signature Black Hole effect over the Cyclops lens.

Movement: VS3235 Super Clone — 60+ Hours (Dandong clone caliber)

Case Material: 904L Oystersteel, 43mm diameter, ~50mm lug-to-lug, 195.3g weight

Bezel: Cerachrom ceramic with platinum dust bezel infill

Crystal: Scratch-resistant sapphire with AR-coated cyclops

Bracelet: 904L Oystersteel, brushed finish, Glidelock clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This 43mm reference is ideal for collectors who find the standard Submariner too small but desire the classic cyclops date functionality. Its substantial 195g weight provides authentic wrist presence for daily wear.
Add to cart
Rolex Super Clone Watches 1:1 Sea Dweller Yellow Gold Black Dial 126603 3235 Movement
Original price was: $1,050.00.Current price is: $890.00.
VSF Edition — Two-Tone Oyster Bracelet

VSF’s iteration of the two-tone Sea-Dweller 126603 addresses the historical weight deficit of precious metal replicas through a specialized tungsten alloy case construction. Tipping the scales at 188.2 grams, this release successfully mimics the substantial wrist presence of the genuine Yellow Rolesor model.

Inside beats the highly regarded Dandong VS3235 clone caliber. Unlike standard ETA-based alternatives, this movement replicates the genuine 3235 architecture, providing a free-sprung balance simulation and exceptional long-term stability.

The 43mm case utilizes 904L Oystersteel integrated with a tungsten core, maintaining a precise 15.2mm thickness. The glossy black dial features the correct single-red SEA-DWELLER text, complemented by Chromalight indices framed in 18k yellow gold PVD.

Movement: Dandong VS3235 — 60+ Hours (Dandong clone caliber)

Case Material: Tungsten-weighted 904L Oystersteel, 43mm diameter, ~50mm lug-to-lug, 188.2g

Bezel: Cerachrom with 18k yellow gold PVD numerals

Crystal: Scratch-resistant sapphire with cyclops and AR coating

Bracelet: Two-tone 904L steel and 18k YG PVD Oyster with Glidelock clasp

Water Resistance: 30m (factory stated) — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is suited for collectors who require the heft of a two-tone diver without compromising on movement reliability. The 43mm profile demands a larger wrist, offering an imposing alternative to the standard Submariner.
Add to cart
Modified Super Clone Watches 1:1 DIW Rolex Sea Dweller “HUNTER ARABIC” 3235 Movement
Original price was: $1,100.00.Current price is: $880.00.
DIWF Edition — Velcro Strap

The DIWF execution of the modified DiW Sea-Dweller Hunter Arabic represents a highly specific technical achievement in composite case manufacturing. Unlike early aftermarket replicas that utilized PVD-coated steel, this reference employs true layered carbon fiber, achieving the correct irregular surface texture and significant weight reduction characteristic of the genuine bespoke modification.

Powering the timepiece is a customized Clone Caliber 3235. While the bridge architecture replicates the genuine Rolex movement, it operates with a measured power reserve of approximately 36 hours. The integration of the date complication aligns with the traditional Cyclops lens, maintaining functional parity with standard Sea-Dweller models.

The 43mm carbon fiber case incorporates the signature crown shoulder guards, seamlessly integrating with the specialized bezel. The dial features distinct Hunter Green Arabic numerals, accurately contrasted against the matte background and treated with responsive Chromalight-style luminescence.

Movement: Clone Caliber 3235 — Approximately 36 hours

Case Material: Layered Carbon Fiber, 43mm diameter, ~50mm lug-to-lug, ~105g

Bezel: Carbon fiber with steel nail implantation scale

Crystal: Scratch-resistant sapphire with anti-reflective coating

Bracelet: Single-type locking screw Velcro strap with integrated carbon buckle

Water Resistance: 30m stated — professional pressure test recommended before swimming

This reference is engineered for collectors seeking a tactical, lightweight alternative to standard 904L Oystersteel divers. Its composite construction makes it highly practical for active scenarios where traditional mass is a detriment.
Add to cart
Modified Super Clone Watches 1:1 DIW Rolex Sea Dweller “IRBIS” Quartz Fiber 3235 Movement
Original price was: $1,100.00.Current price is: $880.00.
DIWF Edition — Velcro Strap with Carbon Buckle

DIWF’s execution of the DiW IRBIS Sea-Dweller represents a specialized segment of the replica market, focusing on advanced composite materials rather than traditional steel. The use of quartz carbon fiber yields an irregular, lightweight case structure that closely mimics the genuine aftermarket modification’s tactile properties.

Driven by a clone Caliber 3235 movement, this piece offers reliable timekeeping housed within the composite shell. Unlike standard steel models, the movement is secured within a specialized inner framework to maintain stability against the carbon outer case. Power reserve operates at approximately 36 hours.

The 43mm profile maintains the imposing dimensions of the traditional Sea-Dweller while drastically reducing wrist fatigue. Its carbon fiber bezel features steel nail implantation technology, providing a distinct visual layer and concave-convex texture. The dial accents, notably the deep green text, contrast sharply against the muted carbon tones.

Movement: Clone Caliber 3235 — Approximately 36 hours

Case Material: Quartz Carbon Fiber, 43.0mm diameter

Bezel: Carbon fiber with steel nail implantation

Crystal: Scratch-resistant sapphire with AR coating

Bracelet: Single-type locking screw Velcro strap with carbon fiber buckle

Water Resistance: 30m stated — professional pressure test recommended before swimming

This reference is engineered for collectors who find standard steel divers overly conventional. The extreme weight reduction and tactical aesthetic make it highly practical for active scenarios where a traditional 43mm steel case would prove cumbersome.
Add to cart
Modified Super Clone Watches 1:1 DIW Rolex Sea Dweller ATOM 3235 Movement
Original price was: $1,100.00.Current price is: $880.00.
DIW Factory Edition — Velcro Strap

The DIW Factory execution of the Rolex Sea-Dweller ATOM represents a significant departure from standard Oystersteel replicas. Utilizing a 43mm forged carbon fiber case with integrated crown shoulder guards, this reference focuses on experimental materials and tactical aesthetics. The irregular texture of the composite material ensures no two cases present identical visual patterns.

At the core operates a customized Swiss Caliber 3235 clone. This movement provides a reliable beat rate while supporting the date complication, housed beneath the signature Cyclops lens. Power delivery is managed by a bidirectional rotor system, yielding a kinetic energy storage of ≥48 hours.

The defining feature is the carbon fiber bezel, which employs steel nail implantation technology for the scale markers, creating a distinct concave and convex tactile feedback. The matte dial is punctuated by a custom green (#006039) accent, complementing the Chromalight luminous application. The assembly is secured by an ergonomic single-type locking screw Velcro strap.

Movement: Customized Swiss Cal.3235 — ≥48 hours

Case Material: Carbon Fiber, 43.0mm diameter, lightweight

Bezel: Carbon fiber with steel nail implantation

Crystal: Sapphire with AR coating and Cyclops lens

Bracelet: Single-type locking screw Velcro strap with carbon buckle

Water Resistance: Stated rating — professional pressure test recommended before swimming

This piece is designed for collectors who appreciate avant-garde aftermarket modifications. It trades the traditional heft of a steel diver for the lightweight, high-tech profile of carbon composite.
Read more
Modified Super Clone Watches 1:1 DIW Rolex Sea Dweller GHOST 3235 Movement
Original price was: $1,100.00.Current price is: $880.00.
DIWF Edition — Velcro Strap

The DIWF execution of the Designa Individual (DiW) Sea-Dweller “Ghost” represents a specialized niche in horological replicas, shifting focus from traditional 904L Oystersteel to advanced composite materials. This specific factory benchmark is noted across enthusiast forums for its proprietary 43mm forged carbon fiber case, which accurately captures the irregular, lightweight texture of the genuine modification.

Driving the replica is a standard Clone Caliber 3235, engineered to mimic the architecture of the Rolex original. While it lacks the extended mainspring of the Dandong variants, it provides reliable daily operation and correct hand-stack alignment. The movement operates at 28,800 vph, ensuring the sweeping seconds hand behaves indistinguishably from the genuine counterpart.

The case and dial architecture demonstrate significant attention to the custom DiW specifications. The 43mm carbon composite profile includes the crown shoulder guards integrated directly into the mold, reducing overall weight dramatically compared to steel variants. The bezel utilizes steel nail implantation technology to create distinct visual layers and a tactile concave/convex texture, while the matte dial features crisp Ghost accents and properly applied Chromalight indices.

Movement: Clone Caliber 3235 — Approximately 36 hours

Case Material: Forged Carbon Fiber, 43mm diameter, approx. 105g

Bezel: Carbon fiber with implanted steel nail markers

Crystal: Scratch-resistant sapphire with cyclops lens and AR coating

Bracelet: Single-type locking screw Velcro strap with carbon fiber buckle frame

Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece is designed for collectors seeking the tactical, ultra-lightweight aesthetic of a bespoke DiW modification. It serves as an excellent weekend or active-wear alternative to traditional heavy steel divers.
Read more