Related products

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak Frost 15500 Grey Dial

  $1,200.00 Original price was: $1,200.00.$980.00Current price is: $980.00.

  APSF Edition — Integrated Frosted Stainless Steel Bracelet

  The hammered-gold “Florentine Finish” is notoriously difficult to replicate, but APSF has achieved a highly commendable execution on this Royal Oak 15500. By meticulously applying the micro-hammering technique to the stainless steel case and bracelet, the factory successfully mimics the diamond-dust light play of the genuine article without compromising the structural integrity of the iconic octagonal geometry.

  Powered by the APSF custom Caliber 4302 automatic clone, this piece moves away from decorated Miyota bases found in earlier iterations. The movement features the correct 32mm diameter architecture and a beautifully skeletonized 22K-toned rotor. As a standard clone caliber, it delivers a power reserve of approximately 36 hours.

  The 41mm case maintains a highly accurate profile, integrating seamlessly with the frosted bracelet. The slate grey dial features the signature Grande Tapisserie pattern, with precise applied baton hour markers and the AP logo. Alternating brushed and polished bevels on the bezel edge provide the necessary contrast to the frosted top surfaces.

  • Movement: Caliber 4302 Clone — Approximately 36 hours
  • Case Material: Frosted stainless steel, 41mm diameter, ~10.4mm thickness
  • Bezel: Frosted stainless steel with polished octagonal bevels
  • Crystal: Sapphire crystal with colorless anti-reflective coating
  • Bracelet: Integrated frosted stainless steel with AP double deployant clasp
  • Water Resistance: 50 meters — a professional water-resistance check is recommended before submersion. Avoid using the pushers or crown while the watch is under water.

  This visually arresting piece is suited for collectors who appreciate avant-garde metallurgical finishing. It serves as a striking statement piece that demands attention under direct lighting.

  Add to cart

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak Rose Gold 15400 Black Dial

  $1,100.00 Original price was: $1,100.00.$950.00Current price is: $950.00.

  APSF Edition — Integrated Rose Gold-Plated Bracelet

  The APSF Audemars Piguet Royal Oak 15400 reference stands as a benchmark in the replica community, specifically noted for its highly accurate 9.2mm case profile and precision-milled integrated bracelet fit. By avoiding the thicker dimensions of older iterations, this release achieves a wrist presence that closely mirrors the genuine counterpart, weighing in at a substantial 169 grams.

  At the core of this piece is the true 1:1 structural clone of the AP Calibre 3120, abandoning the outdated Miyota-with-plates architecture. This movement features the correct balance wheel positioning and precise perlage polishing on the bridges, delivering an approximate 36-hour power reserve.

  The 18k rose gold plated 316L steel case exhibits the mandatory brushed and polished alternating finishing across the octagonal bezel and lug transitions. The dial features a crisp black tapisserie pattern with accurate text depth and appropriately proportioned applied indices.

  • Movement: Clone AP Calibre 3120 Automatic — Approximately 36 hours
  • Case Material: 18k Rose Gold Plated 316L Steel, 41mm diameter, 169g
  • Bezel: 18k Rose Gold Plated Steel with aligned white gold-toned screws
  • Crystal: Scratch-Resistant Sapphire with Colorless AR Coating
  • Bracelet: Integrated Rose Gold-Plated with alternating finish, AP folding clasp
  • Water Resistance: 50m stated rating — professional pressure test recommended before swimming

  This reference is suited for collectors seeking the distinct presence of a precious metal Royal Oak without the prohibitive secondary market premiums. Its 41mm diameter demands a moderate to larger wrist for optimal proportions.

  Add to cart

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak Frost 15400 Blue Dial

  $1,100.00 Original price was: $1,100.00.$950.00Current price is: $950.00.

  APSF Edition — Integrated Stainless Steel Bracelet

  The APSF Royal Oak 15400 Frosted edition captures the intricate Florentine finish with exacting tolerances. Known among horological enthusiasts for its accurate hammered-metal aesthetic, this stainless steel variant reflects ambient light dynamically without relying on gem-setting, matching the visual signature of the genuine reference.

  Powered by the Caliber 3120 automatic clone movement, this piece features a correctly engraved gold-toned rotor. The architecture mirrors the genuine layout, offering reliable daily performance with a beat rate of 28,800 vph. Power reserve is approximately 36 hours.

  The 41mm case exhibits the signature tapisserie dial in a deep slate blue sunburst, accurately matching the genuine reference’s hue. The integrated bracelet fit demonstrates proper brushed/polished alternating finishing alongside the hammered texture, ensuring correct articulation on the wrist.

  • Movement: Caliber 3120 Clone — Approximately 36 hours
  • Case Material: 316L Stainless Steel (Frosted), 41mm diameter, 51mm lug-to-lug, ~170g
  • Bezel: Frosted stainless steel with polished hexagonal screws
  • Crystal: Sapphire crystal with colorless anti-reflective coating
  • Bracelet: Frosted stainless steel integrated bracelet with AP folding clasp
  • Water Resistance: 50 meters stated — professional pressure test recommended before swimming. Never engage the crown or pushers when the piece is submerged.

  This piece suits collectors seeking a highly textured, light-catching aesthetic without the fragility of factory diamonds. Its robust construction handles formal and smart-casual environments with equal competence.

  Add to cart

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak 15407 Skeleton Dial

  $1,150.00 Original price was: $1,150.00.$949.00Current price is: $949.00.

  THB Factory V2 Edition — Integrated Steel Bracelet

  The THB Factory V2 release of the Royal Oak 15407 Double Balance Wheel Openworked represents a significant structural milestone in skeletonized replicas. By discarding the traditional Miyota 9015 base with decorative plates, THB has achieved the genuine-specification 9.9mm case thickness. This high-density 316L steel construction weighs in at a substantial 170 grams, correcting the lightweight feel and bloated case profiles that plagued earlier iterations of this reference.

  Powering the piece is the custom SA3132 Super Clone integrated skeleton movement, engineered specifically for this 1:1 openworked architecture. Unlike previous versions with static front plates, the visible mechanical gears and transmission wheel axles on the dial side feature real mechanical functionality. The movement utilizes a stable single balance wheel while accurately replicating the visual presence of the iconic 8 o’clock rose gold bridge, delivering approximately 36 hours of power reserve.

  The 41mm case features meticulous alternating brushed and polished finishing across the octagonal bezel and integrated lugs. The slate grey openworked dial is highly accurate to the genuine charcoal tone, with the ‘AUDEMARS PIGUET’ logo executed via high-precision heavy ink printing on the inner sapphire crystal. The baton hands and markers are treated with Super-LumiNova for low-light legibility.

  • Movement: Custom SA3132 Super Clone Integrated Caliber — Approximately 36 hours
  • Case Material: 316L Stainless Steel, 41mm diameter, 170g weight
  • Bezel: 316L Steel with vertical brushing and polished chamfers
  • Crystal: Double-sided anti-reflective sapphire crystal
  • Bracelet: Integrated 316L steel with AP folding clasp
  • Water Resistance: 50m Stated — a professional water-resistance check is recommended before submersion. Avoid using the pushers or crown while the watch is under water.

  This reference is suited for the horological enthusiast who demands accurate case dimensions and functional skeletonized mechanics, offering a highly technical aesthetic without the bulk of older replica builds.

  Add to cart