Patek Philippe Super Clone Watches

Nautilus 5711, Aquanaut & Calatrava — Clone Cal.324 & Case Specifications

The Patek Philippe super clone collection — the absolute apex of integrated bracelet sports watches and haute horlogerie replication. Achieving a true 1:1 replica of a Patek Philippe requires overcoming the industry’s strictest dimensional tolerances. Our premier collection abandons the thick, decorated Miyota movements of the past in favour of true 1:1 clone calibers, allowing our Nautilus and Aquanaut references to mirror the exact ultra-thin case profiles and mechanical behaviours of the genuine Swiss masterpieces.

Nautilus & Aquanaut Super Clone References

Nautilus 5711/1A (discontinued 2021) — 40mm stainless steel case, powered by the clone Cal. 324 S C. Available in the iconic blue gradient dial and the final-production olive green sunburst dial (ref. 5711/1A-014) — the last iteration produced before Patek Philippe retired this generation. These super clones achieve the authentic 8.3mm case thickness that lower-tier replicas consistently fail to replicate.
Nautilus 5712/1A — 40mm case featuring the highly complex clone Cal. 240 PS IRM C LU with a fully functional micro-rotor, asymmetrical power reserve indicator, date, and moonphase display.
Aquanaut 5167A — 40mm stainless steel case on the signature UV-resistant tropical composite strap, clone Cal. 324 S C, featuring the correct embossed dial geometry and luminescent Arabic numerals.
Aquanaut 5168G — 42.2mm white gold-tone case, available in Khaki Green or Midnight Blue, retaining the classic Aquanaut architecture at a contemporary case diameter.

Collector Notes: Case Geometry & The Cal. 324 Bottleneck

The defining metric for any high-end Patek Philippe super clone is case thickness. Lower-tier replicas relying on modified Miyota 9015 base movements inflate the Nautilus case to over 9.5mm. Our top-tier super clones utilise bespoke clone Cal. 324 architectures, allowing the case to sit at the genuine 8.3mm specification — a measurable difference that is immediately apparent when the watch is placed against the wrist.

Seasoned collectors know that the genuine Cal. 324 S C is a non-hacking movement: the seconds hand does not stop when the crown is pulled to set the time. Our clone 324 calibers faithfully replicate this non-hacking mechanical behaviour — a technical detail that immediately separates a true super clone from a generic replica. The dynamic colour shift of the Nautilus dials, the engraved rotor finishing, and movement amplitude are verified during our pre-shipment quality control process.

68 Products

Filters

Modified Super Clone Watches 1:1 DiW Patek Philippe Nautilus 5711 Carbon Dial On Carbon Bracelet
Original price was: $2,200.00.Current price is: $1,550.00.
DiWF Edition — Full Carbon Fiber Bracelet

The DiWF iteration of the Designa Individual (DiW) modified Patek Philippe Nautilus 5711 represents a significant technical achievement in alternative materials. By utilizing high-density forged carbon for both the case and the integrated bracelet, this reference achieves an astonishing verified weight of just 49.1g. It strictly adheres to the ultra-lightweight ethos of the customized genuine article, maintaining a remarkably thin 9.4mm profile.

Powering this reference is the established Clone 324 caliber. While it lacks the free-sprung Gyromax balance of the genuine Patek Philippe movement, the architecture closely mirrors the original with a decorative 21k gold-plated central rotor and perlage across the mainplates. The movement operates at 28,800 vph and delivers a power reserve of approximately 36 hours, consistent with current market clone specifications.

The dial features a woven carbon fiber texture, complemented by applied indices and subtle dark green accent elements. The integration of the carbon bracelet links requires precise machining tolerances to ensure articulation without compromising structural integrity, a challenge DiWF has managed with notable consistency.

Movement: Clone 324 Caliber — Approximately 36 hours

Case Material: Forged Carbon Fiber, 40mm diameter, 49.1g

Bezel: Forged Carbon Fiber, matte finish

Crystal: Scratch-resistant Sapphire with colorless AR coating

Bracelet: Full Forged Carbon Fiber links with steel deployant clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece is engineered for collectors who appreciate the Nautilus silhouette but desire the tactical, ultra-lightweight characteristics of a boutique modification. It serves as a highly specialized alternative to traditional steel sports watches.
Add to cart
Patek Philippe Super Clone Watches 1:1 Grand Complications Celestial 6102P-001 Blue Dial
Original price was: $1,950.00.Current price is: $1,159.00.
PPF Edition — Three-Layer Sapphire Celestial Dial | 10.5mm Correct Profile

Function Note: The star chart is manually positioned — it does not self-advance with timekeeping. The moon phase advances daily with the date calendar, not by lunar cycle. Please read the full product description before ordering.

The PPF 6102P achieves what earlier factory attempts could not: a verified 10.5mm case thickness matching the genuine platinum reference profile. Previous versions of this reference required cases exceeding 12.5mm to accommodate gearing, making them visually inconsistent with the genuine. PPF resolved this by building on a Shanghai Cal.240 two-hand base without a complications module, maintaining the dimensional accuracy that makes the 6102P recognisable on the wrist.

The dial is the principal achievement — three separate metalized sapphire disks produce the characteristic visual depth of the genuine: dark and restrained in ambient light, shifting to deep celestial blue under direct illumination. Star rendering is sharp with correct point definition. Case weight is 87g in 316L stainless steel, polished to match the luster of the genuine platinum reference.

Movement: Shanghai Cal.240 Base Automatic — Two-Hand, ~36 hours power reserve

Case: 316L Stainless Steel, 44mm × 10.5mm, 87g — PT950 case stamp / AU750 clasp stamp

Dial: Three-layer metalized sapphire disk construction — manually positioned sky chart

Crystal: Sapphire with dual-sided anti-reflective coating

Strap: Black leather with polished Calatrava fold-over clasp

Water Resistance: 30m stated — professional pressure test recommended before water exposure

Recommended for the collector who values the visual architecture and correct case dimensions of the 6102P. For collectors who require the celestial functions to operate as movement-driven complications, please review the function disclosure in the full product description.
Add to cart
Patek Philippe Super Clone Watches 1:1 Grand complications Rose Gold 6102R-001 Black Starry Dial
Original price was: $1,950.00.Current price is: $1,199.00.
PPF Edition — Rose Gold PVD | Black Starry Three-Layer Sapphire Dial

Function Note: The star chart is manually positioned via the lower crown — it does not self-advance with timekeeping. The moon phase advances daily with the date calendar, not by lunar cycle. Please read the full product description before ordering.

The 6102R is the rose gold expression of the Patek Philippe Celestial grand complication — a black starry dial against a warm PVD case, achieving the same verified 10.5mm profile as the genuine 18k rose gold reference. PPF reaches this dimension through a two-hand Shanghai Cal.240 base without a complications module, the same engineering approach used in the 6102P blue dial variant.

The black starry dial is built on three separate metalized sapphire disks. Against the dark background, silvered star points register with greater contrast than the blue variant — consistent across all lighting conditions rather than shifting with illumination angle. The rose gold PVD coating covers case, bezel, and lugs with accurate colour saturation, paired with a dark leather strap and rose gold Calatrava fold-over clasp.

Movement: Shanghai Cal.240 Base Automatic — Two-Hand, ~36 hours power reserve

Case: Rose Gold PVD 316L Stainless Steel, 44mm × 10.5mm, ~87g

Dial: Black Starry — three-layer metalized sapphire disk construction, manually positioned sky chart

Crystal: Sapphire with dual-sided anti-reflective coating

Strap: Dark leather with rose gold PVD Calatrava fold-over clasp

Water Resistance: 30m stated — professional pressure test recommended before water exposure

The more formally assertive of the two 6102 variants — the black dial and rose gold case present a consistent, high-contrast combination across all light conditions. Recommended for the collector who values the visual architecture and correct case profile of the 6102R over functional complication accuracy.
Add to cart
Modified Super Clone Watches 1:1 DiW Patek Philippe Nautilus 5711/1A “ROSE GOLD BLACK GRAIL”
Original price was: $2,300.00.Current price is: $1,650.00.
DIWF Edition — Carbon & DLC Steel Bracelet

DIWF’s execution of the DiW “Rose Gold Black Grail” 5711 Nautilus represents a niche but highly sought-after tier of horological modification. Weighing a mere 93.2g, this forged carbon composite build accurately replicates the distinct irregular marbling of the genuine custom piece while maintaining structural integrity.

Driven by the proven Clone Caliber 324, the movement architecture features the correct Gyromax-style balance wheel simulation and perlage finishing on the bridges. Power reserve yields approximately 36 hours, providing reliable daily performance.

The case measures 40mm in diameter with a verified ultra-thin 9.4mm profile, heavily utilizing high-end carbon fiber paired with black-coated stainless steel elements. The dial integrates rose gold-tone markers against a dark textured backdrop, capturing the deep umber and black aesthetic of the original modification.

Movement: Clone Caliber 324 — Approximately 36 hours

Case Material: Forged Carbon Fiber & DLC Stainless Steel, 40mm, 93.2g

Bezel: Forged Carbon Fiber, accurate irregular marbling

Crystal: Sapphire with colorless AR coating

Bracelet: Carbon fiber and DLC stainless steel composite links

Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece serves collectors seeking an avant-garde alternative to traditional steel sports watches. The extreme lightweight profile makes it an exceptionally comfortable daily wearer for modern, casual environments.
Add to cart
Modified Super Clone Watches 1:1 DiW Patek Philippe Nautilus 5711 BLACK GRAIL G-BLUE
Original price was: $2,300.00.Current price is: $1,600.00.
DIWF Edition — Forged Carbon & DLC Steel Composite Bracelet

The DIWF Patek Philippe Nautilus 5711 DiW “Black Grail G-Blue” represents a highly specialized sector of replica horology, focusing on bespoke aftermarket modifications rather than factory-standard releases. By utilizing an advanced forged carbon composite, DIWF has successfully replicated the featherlight 51.8g weight of the genuine DiW custom, establishing a new benchmark for ultra-lightweight Nautilus super clones.

To achieve the strictly verified 9.4mm case thickness while maintaining long-term mechanical stability, this edition utilizes a reliable Japanese Miyota 9015 caliber heavily modified to simulate the Patek Philippe 324 SC architecture. The movement features custom decorative bridges, faux jewels, and a Patek-signed rotor, delivering consistent performance with a power reserve of approximately 36 hours.

The case and bezel exhibit authentic forged carbon marbling, ensuring no two pieces are visually identical. The dial is executed in a striking G-Blue tone, featuring correct lacquer application and applied hour markers that contrast sharply against the matte stealth aesthetic of the composite case and DLC stainless steel bracelet links.

Movement: Miyota 9015 (Modded 324 SC) — Approximately 36 hours

Case Material: Forged Carbon Fiber, 40mm, 51.8g

Bezel: Forged Carbon Fiber with unique marbled texture

Crystal: Scratch-Resistant Sapphire with AR Coating

Bracelet: Forged Carbon & DLC Stainless Steel Composite, Nautilus Clasp

Water Resistance: 30m Stated — professional pressure test recommended before swimming

This piece is specifically targeted at collectors seeking an avant-garde, ultra-lightweight alternative to traditional steel sports watches. Its specialized construction demands an appreciation for modern composite materials and stealth horology.
Read more
Patek Philippe Super Clone Watches 1:1 Nautilus 5711 Green Dial Diamond Bezel
Original price was: $1,649.00.Current price is: $949.00.
3KF Factory Edition — Integrated Stainless Steel Bracelet

The 3KF Patek Philippe Nautilus 5711/1300A-001 represents a significant milestone in case engineering, achieving an ultra-thin profile of approximately 8.1mm and a total weight of 120g. Widely recognized across horological forums as the benchmark for this specific reference, this iteration correctly utilizes a hand claw-set bezel featuring 32 square-cut zirconia stones rather than relying on standard adhesive methods. The execution of the sunburst olive green dial, paired with its custom color-matched date disc, demonstrates a rigorous approach to replicating the final production years of the steel 5711.

At the core of this replica is the 3KF exclusive 1:1 Caliber 324 SC clone movement. Unlike competing versions that rely on decorated Miyota base calibers, this movement is engineered without superficial decorative plates, allowing for the correct positioning of the Gyromax balance wheel at the 6 o’clock position. The movement features a unidirectional 21K gold-plated rotor and delivers a power reserve of approximately 36 hours, maintaining stable amplitude across its winding cycle.

The stainless steel case and integrated bracelet exhibit precise alternating brushed and polished finishes, with the critical first end-link remaining correctly fixed to ensure an ergonomic drape over the wrist. The bespoke olive green dial features the requisite horizontal embossing and correct lacquer thickness, complemented by highly polished baton hands and hour markers filled with Swiss Super-LumiNova for optimal low-light legibility.

Movement: 1:1 Super Clone Caliber 324 SC — Approximately 36 hours

Case Material: Stainless Steel, 40mm diameter, 8.1mm thickness, 120g weight

Bezel: Stainless steel with 32 hand claw-set square-cut zirconia stones

Crystal: Sapphire with colorless anti-reflective coating

Bracelet: Integrated stainless steel, brushed and polished, fold-over safety clasp

Water Resistance: 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the discerning collector who prioritizes mechanical accuracy and case slimness. The sophisticated integration of the olive dial and gem-set bezel makes this a highly versatile piece for formal and smart-casual environments.
Add to cart
Patek Philippe Super Clone Watches 1:1 Nautilus Moon Phase 18K Rose Gold 5712 Brown Dial New Buckle
Original price was: $1,749.00.Current price is: $1,249.00.
PPF V4 Edition — Integrated Rose Gold Bracelet

The PPF V4 iteration of the Patek Philippe Nautilus 5712/1R-001 stands as a definitive milestone in modern replica horology. By engineering an integrated movement rather than relying on modified base calibers, this release achieves the elusive 8.8mm case thickness of the genuine article while introducing the updated ‘New Buckle’ clasp with built-in micro-adjustment.

Powered by the exclusive PPF Caliber 240 automatic movement, this piece features a fully functional 22K gold-toned micro-rotor and true mechanical complications. Unlike previous iterations with decorative plates, every indicator—from the moon phase to the power reserve—operates authentically, delivering a power reserve of approximately 30 hours.

Constructed from 316L stainless steel and finished with a high-thickness 18K rose gold vacuum plating, the case accurately replicates the warm 5N hue of the original. The signature horizontal embossed gradient brown dial transitions flawlessly from a sunburst deep brown center to dark edges, offering remarkable depth under varying light conditions.

Movement: PPF Integrated Clone Caliber 240 — Approximately 30 hours

Case Material: 316L Steel with 18K Rose Gold Plating, 40mm x 8.8mm, 134g

Bezel: 18K Rose Gold Plated, accurate brushed and polished finishing

Crystal: Flat Sapphire with dual-sided AR coating

Bracelet: Integrated 18K Rose Gold Plated with V4 New Buckle and micro-adjust

Water Resistance: 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the discerning collector who demands mechanical authenticity. This reference offers unparalleled dial complexity and an ultra-thin profile suitable for formal and smart-casual environments.
Add to cart
Patek Philippe Super Clone Watches 1:1 5711 Nautilus Dark blue Dial
Original price was: $1,599.00.Current price is: $899.00.
3K Factory (3KF) Edition — Integrated Stainless Steel Bracelet

The 3K Factory (3KF) iteration of the Nautilus 5711/1A-010 stands as a benchmark in horological replication, primarily due to its dimensional accuracy. By developing a true integrated movement rather than relying on modified base calibers, 3KF achieves the highly coveted 8.4mm case thickness, matching genuine proportions. This V5 batch specifically addresses previous dial color anomalies, delivering a highly accurate dark blue-black gradient that shifts correctly under direct light.

Powered by the proprietary SC324 integrated caliber, this model mirrors the architecture of the genuine Patek Philippe movement. Unlike the Miyota-based alternatives from rival factories, the 3KF SC324 features a correct free-sprung balance with a blackened gunmetal balance wheel and precise perlage côtes de Genève finishing. As per the traditional 324 caliber, it utilizes a non-hacking seconds hand and delivers approximately 38 – 45 hours of power reserve.

The 40mm case is machined from 316L stainless steel, exhibiting the correct alternating brushed and polished bevels along the iconic porthole bezel. The dial features the signature horizontal embossed relief in a pure dark blue tone, avoiding the purple hue found in earlier iterations. Rhodium-plated hour markers are filled with Swiss Super-LumiNova for consistent low-light visibility.

Movement: 3KF Custom SC324 Integrated Caliber — Approximately 38 – 45 hours

Case Material: 316L Stainless Steel, 40mm diameter, 47.5mm lug-to-lug, 122g weight

Bezel: 316L Stainless Steel, accurate octagonal geometry with polished chamfers

Crystal: Flat Sapphire with double-sided anti-reflective coating

Bracelet: Integrated 316L steel, brushed finish with polished center link bevels, fold-over clasp

Water Resistance: Physical daily waterproof rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This piece is tailored for the collector who prioritizes mechanical accuracy and case thinness above all else. Its refined profile slips seamlessly under a dress cuff, making it a versatile choice for both formal and casual environments.
Add to cart
Patek Philippe Super Clone Watches 1:1 Nautilus Moon Phase 5712 Blue Dial New Clasp
Original price was: $1,659.00.Current price is: $1,199.00.
PPF V4 Edition — Integrated Steel Bracelet

The PPF V4 iteration of the Patek Philippe Nautilus 5712/1A represents a significant horological milestone in the replica market. Widely regarded across enthusiast forums as the benchmark for this reference, the V4 updates the platform with the 2022-style lockable adjustment clasp, allowing for 2mm to 4mm of on-the-fly extension. This addresses a long-standing wearability issue with the integrated Nautilus bracelet during temperature fluctuations.

At the core of this model is the Super Clone Caliber 240. Unlike earlier iterations or competing factories that relied on modified base movements with decorative plates, PPF has engineered a true all-in-one micro-rotor caliber. The power reserve indicator, analog date, and astronomical moon phase are fully functional. The 22k gold-plated pearl rotor actively winds the mainspring, delivering 30+ hours of power reserve.

The case profile is meticulously controlled, measuring approximately 9.0mm in thickness and weighing 132g, closely aligning with genuine specifications. The dial exhibits the correct Morandi blue-grey tone with the signature horizontal embossed texture. Finishing on the bezel features the correct alternating brushed surfaces and polished chamfers, maintaining the distinct Gyromax-inspired geometry of the Nautilus line.

Movement: Super Clone Caliber 240 PS IRM C LU — 30+ hours

Case Material: Stainless steel, 40mm diameter, approx. 9.0mm thickness, 132g weight

Bezel: Stainless steel, brushed with polished chamfers

Crystal: Sapphire with colorless anti-reflective coating

Bracelet: Integrated stainless steel with 2022+ push-button extension clasp

Water Resistance: 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the discerning collector evaluating complex mechanical replicas. The ultra-thin profile and integrated bracelet make it an ideal candidate for formal environments and versatile daily wear.
Add to cart
Patek Philippe Super Clone Watches 1:1 Nautilus 5711 Tiffany & Co Blue Dial
Original price was: $1,599.00.Current price is: $899.00.
3KF Edition — Integrated Stainless Steel Bracelet

The 3KF execution of the Nautilus 5711/1A-018 stands as a significant technical achievement within the replica market, primarily due to its case architecture. By utilizing an integrated clone movement rather than relying on decorated base calibers, this edition achieves the elusive 8.3mm case thickness of the genuine article. This structural fidelity has established the 3KF variant as the benchmark for collectors prioritizing exact dimensional accuracy.

Powering this reference is the Super Clone 324 S C caliber. Unlike earlier iterations that utilized a modified Miyota 9015 with decorative plates, this movement is designed from the ground up to mirror Patek Philippe’s architecture. It features the correct bridge layout and perlage finishing visible through the sapphire caseback, operating with a power reserve of approximately 36 hours.

The stainless steel case measures precisely 40mm in diameter and weighs a confirmed 121.8 grams, offering a tactile experience closely aligned with the genuine piece. The dial features a vibrant Tiffany Blue lacquer finish, complete with the double-signed stamp at 6 o’clock and black oxidized gold markers that provide necessary contrast against the turquoise background.

Movement: Super Clone 324 S C — Approximately 36 hours

Case Material: Stainless steel, 40mm diameter, 121.8g weight

Bezel: Stainless steel, vertical satin brushed with polished chamfers

Crystal: Sapphire with colorless anti-reflective coating

Bracelet: Integrated stainless steel with fold-over clasp

Water Resistance: Stated 50m — professional pressure test recommended before swimming

Designed for the horological enthusiast who values mechanical and dimensional accuracy, this piece offers an exacting reproduction of one of the most heavily scrutinized modern luxury sports watches.
Add to cart
Patek Philippe Super Clone Watches 1:1 40th Anniversary Nautilus 5711
Original price was: $1,599.00.Current price is: $899.00.
3KF Edition — Integrated Steel Bracelet

The 3KF 5711/1P 40th Anniversary edition stands as a horological benchmark due to its bespoke movement architecture. Unlike earlier iterations relying on modified base calibers, this release achieves the elusive 8.5mm case thickness, directly addressing a long-standing grievance within the replica community.

Powered by the reverse-engineered Super Clone Caliber 324, this movement mirrors the genuine layout, including the correct hand stack and balance wheel positioning. It operates at 28,800 vph with a free-sprung Gyromax-style balance, delivering approximately 36 hours of power reserve.

Machined from 316L stainless steel with a platinum-look finish, the case measures 40mm in diameter and weighs a verified 121.7g. The commemorative dial mimics the genuine lacquer thickness and features the signature 40th-anniversary embossing, with dial text annotations highlighted in a distinct dark tone.

Movement: Super Clone Caliber 324 SC — Approximately 36 hours

Case Material: 316L Stainless Steel, 40mm diameter, 47mm lug-to-lug, 121.7g

Bezel: 316L Stainless Steel, accurate vertical brushing

Crystal: Sapphire with Colorless AR Coating

Bracelet: Integrated 316L steel, alternating brushed and polished finish, Nautilus clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece is tailored for the purist who prioritizes mechanical accuracy and case proportions over superficial aesthetics. Its ultra-thin profile allows it to slide effortlessly under a tailored dress shirt cuff.
Add to cart
Patek Philippe Super Clone Watches 1:1 Aquanaut 5167/1A-001 Black Dial 40mm
Original price was: $1,599.00.Current price is: $899.00.
3KF Factory Edition — Stainless Steel Bracelet

The 3KF iteration of the 5167/1A-001 stands as a technical benchmark in the replica landscape, primarily due to its reverse-engineered movement architecture. By bypassing the traditional Miyota 9015 base utilized by rival factories, this piece achieves the exact 8.3mm case profile of the genuine article.

Housed inside is the proprietary Super Clone 324 S C caliber. This mechanism replicates the genuine bridge layout, platinum-plated rotor, and balance wheel positioning, operating with a correct non-hacking seconds hand. Power reserve is rated at approximately 36 hours, maintaining consistent amplitude across its winding cycle.

The 40mm case is machined from 316L stainless steel, exhibiting a precise interplay of satin-brushed and high-polish finishes. The dial features the signature embossed geosphere pattern in black, though horologists note the lume indices can present a marginally greener daylight hue than the stark white OEM application.

Movement: Super Clone 324 S C — Approximately 36 hours

Case Material: 316L Stainless Steel, 40mm diameter, 46.5mm lug-to-lug, 146g

Bezel: 316L Stainless Steel, vertically brushed with polished chamfers

Crystal: Sapphire with colorless AR coating

Bracelet: 316L Stainless Steel, alternating finish, double-fold deployant clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece serves the collector who prioritizes exact dimensional accuracy and movement aesthetics over off-the-shelf reliability. Its ultra-thin 8.3mm profile allows it to slide effortlessly beneath a tailored cuff, fulfilling its role as a versatile luxury sports watch.
Add to cart
Patek Philippe Super Clone Watches 1:1 Aquanaut Rose Gold 5167R-001 40.8 mm
Original price was: $1,649.00.Current price is: $949.00.
3K Factory (3KF) Edition — Tropical Fluoroelastomer Strap

The 3KF Patek Philippe Aquanaut 5167R-001 represents a significant technical milestone in replica horology, primarily due to its 8.3mm case thickness. Unlike previous iterations relying on decorated base calibers, this release utilizes a fully integrated movement to match the genuine profile. The 40.8mm rose gold-plated case provides the exact proportions expected by discerning collectors.

Powered by the custom Clone 324 SC automatic integrated caliber, it features a blackened free-sprung balance wheel and correct ruby bearing placements. Operating at 28,800 vph, this non-hacking movement delivers stable timekeeping and ensures the case remains ultra-thin. Power reserve is rated at approximately 36 hours under standard daily wear.

The 316L stainless steel case is treated with a high-thickness 18K rose gold vacuum plating, capturing the warm red tones of the authentic alloy. The dial presents a highly accurate chocolate brown sunburst gradient with crisp embossed grid patterns. Applied rose gold numerals are filled with pure white Super-LumiNova, eliminating the greenish tint seen in older batches.

Movement: Clone 324 SC Automatic — Approximately 36 hours

Case Material: 316L Steel with 18K Rose Gold Plating, 40.8mm diameter, 91g weight

Bezel: 18K Rose Gold plated, vertical brushed finish with polished chamfers

Crystal: Flat Sapphire with double-sided AR coating

Bracelet: Chocolate brown Tropical composite rubber, 18K RG plated fold-over clasp

Water Resistance: 30m physical living waterproof — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

This piece serves as an elegant yet robust sports watch for collectors seeking precise case dimensions. Its versatile aesthetic pairs naturally with casual attire while maintaining high horological standards.
Add to cart
Patek Philippe Super Clone Watches 1:1 Aquanaut 5167 40 mm
Original price was: $1,649.00.Current price is: $949.00.
3KF Edition — Composite Tropical Strap

The 3KF release of the Aquanaut 5167 represents a definitive shift in the replica landscape for this reference. By engineering a custom caliber rather than relying on decorated off-the-shelf movements, this factory has successfully achieved the elusive 8.3mm case thickness of the genuine article. This structural accuracy addresses the primary critique of previous iterations, offering collectors a mechanically and dimensionally faithful alternative.

At the core of this model is the Clone 324 movement. Unlike standard Miyota-based alternatives, this mechanism features a proper balance bridge architecture and eliminates the need for bulky decorative plates. The movement correctly operates without a hacking mechanism, mirroring the genuine caliber, and delivers a power reserve of approximately 36 hours. Finishing details include perlage on the base plate and Geneva stripes across the bridges.

The 40mm stainless steel case is executed with sharp transitions between the satin-brushed bezel and highly polished flanks. Weighing precisely 90.5 grams as verified, the watch maintains the distinctively lightweight, ergonomic profile expected from the 5167. The embossed checkerboard dial features accurately proportioned applied Arabic numerals, though lighting conditions may reveal minor variance in the luminescent compound’s daylight hue.

Movement: Clone 324 Caliber — Approximately 36 hours

Case Material: 316L Stainless Steel, 40.0mm diameter, 8.3mm thickness, 90.5g weight

Bezel: 316L Stainless Steel, vertically brushed with polished chamfers

Crystal: Sapphire with colorless anti-reflective coating

Bracelet: Black composite rubber tropical strap with double fold-over clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming

This reference is ideally suited for the collector who prioritizes exact dimensional accuracy and movement architecture over superficial aesthetics. Its slim profile ensures it slides effortlessly under a tailored cuff while remaining robust enough for casual wear.
Add to cart
Patek Philippe Super Clone Watches 1:1 Aquanaut 5167 Black Dial 40mm Red Strap Special Edition
Original price was: $1,599.00.Current price is: $899.00.
3K Factory (3KF) Edition — Red Tropical Rubber Strap

3KF’s iteration of the Aquanaut 5167 Special Edition establishes the benchmark for this reference by successfully engineering a true 1:1 clone of the Caliber 324 SC. Unlike previous iterations that relied on modified Miyota base movements with decorative plates, this version achieves the exact 8.3mm thickness of the genuine article, ensuring the precise wearing profile expected by collectors.

Powered by the exclusive 3K Factory Caliber 324 SC, the movement replicates the genuine architecture from the ground up, including the distinctive blackened free-sprung balance wheel and correct crown stem height. This structural accuracy eliminates the need for a thicker case back, allowing the watch to sit perfectly flat on the wrist while delivering a reliable power reserve of approximately 38 – 45 hours.

The 40.8mm cushion-shaped case is milled from 316L stainless steel, featuring precise vertical brushing on the bezel framed by high-polished chamfers. The matte black dial showcases the signature embossed grenade grid pattern, complemented by high-density white Super-LumiNova and paired with a highly saturated red composite fluoroelastomer strap for a striking visual contrast.

Movement: 3KF Clone Caliber 324 SC — Approximately 38 – 45 hours

Case Material: 316L Stainless Steel, 40.8mm diameter, 8.3mm thickness, 90g

Bezel: 316L Stainless Steel, vertically brushed with polished chamfers

Crystal: Scratch-proof Sapphire with double-sided AR coating

Bracelet: Red Tropical high-density fluoroelastomer rubber with symmetric butterfly clasp

Water Resistance: 50m Stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Ideal for collectors seeking the exact dimensional footprint of the genuine 5167. The aggressive red strap combination offers a highly casual, athletic aesthetic suitable for weekend wear.
Add to cart
Patek Philippe Super Clone Watches 1:1 Aquanaut 5167 Black Dial 40mm
Original price was: $1,599.00.Current price is: $899.00.
3KF Edition — Tropical Composite Rubber Strap

The 3KF V3 represents a significant horological achievement in the Aquanaut 5167A lineage by achieving the genuine-spec 8.1mm case thickness. Unlike previous iterations that relied on decorated Miyota base calibers, this version utilizes a ground-up custom architecture to eliminate the need for secondary adapter plates.

Powered by the Super Clone Caliber 324, this mechanism features functional ruby jewels, correct non-hacking seconds, and accurate perlage and côtes de Genève finishing on the bridges. In accordance with genuine architecture, the balance wheel mimics the Gyromax style. It delivers approximately 36 hours of power reserve.

Machined from stainless steel, the 40mm case weighs exactly 90.7g and maintains the iconic octagonal bezel with alternating brushed and polished facets. The black embossed dial accurately reflects the correct lacquer thickness, complemented by Super-LumiNova markers that exhibit the proper green emission under low light.

Movement: Super Clone Caliber 324 — Approximately 36 hours

Case Material: Stainless Steel, 40mm diameter, 46.5mm lug-to-lug, 90.7g

Bezel: Stainless Steel, highly accurate brushed top with polished chamfers

Crystal: Scratch-resistant sapphire with colorless AR coating

Bracelet: Tropical composite rubber with Aquanaut fold-over clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece serves the collector who prioritizes exact dimensional accuracy and movement architecture over superficial dial aesthetics. The 8.1mm profile allows it to slide effortlessly under a tailored cuff, making it a versatile daily wearer.
Add to cart

Load More All products loaded.