Audemars Piguet

APS Factory Edition — Integrated Steel Bracelet

The APS Factory iteration of the 26331ST resolves the historical thickness issue that previously plagued Royal Oak Chronograph replicas. By utilizing a newly developed movement architecture, APS successfully brings the case profile down to 11.2mm, nearly identical to the genuine 11mm specification. This represents a significant technical benchmark within the community, eliminating the top-heavy wearability of older variants.

This model is powered by the APS Clone Calibre 2385. Unlike older platforms that relied on unmodified, bulky 7750 bases, this integrated approach allows for proper sub-dial spacing at 3, 6, and 9 o’clock while maintaining a slim profile. The power reserve is rated at approximately 36 hours, providing reliable daily performance.

Crafted from solid 316L stainless steel, the 41mm case features the signature alternating brushed and polished finishing on the bezel and lug chamfers. The dial exhibits a deep blue Grande Tapisserie pattern with contrasting silver rhodium-toned sub-dials, closely replicating the genuine light-play and geometric texture.

• Movement: APS Clone Calibre 2385 — Approximately 36 hours
• Case Material: 316L Stainless Steel, 41mm diameter, 11.2mm thickness, 186.8g weight
• Bezel: 316L Stainless Steel with polished hexagonal screws
• Crystal: Scratch-resistant sapphire with colorless AR coating
• Bracelet: Integrated 316L steel with AP double deployant clasp
• Water Resistance: 30m rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This piece is engineered for enthusiasts who prioritize correct case proportions and integrated bracelet fit over standard chronograph functionality. It presents a highly accurate silhouette that easily slides under a tailored cuff.

THB Factory (THBF) Edition — Integrated Black Ceramic Bracelet

The THBF iteration of the 15416CE represents a significant technical pivot in the openworked market, prioritizing the ultra-slim 9.8mm profile that defines the genuine Double Balance Wheel reference. Unlike previous batches that utilized thicker modified plates, this version achieves the correct geometric proportions required for the integrated ceramic bracelet to drape naturally on the wrist.

At its core lies the custom Calibre 3132, a dedicated skeletonized movement featuring a functional double balance wheel architecture. The regulation is handled via a traditional index system, providing a stable beat rate of 28,800 vibrations per hour while maintaining a power reserve of approximately 36 hours, ensuring mechanical reliability without compromising the visual depth of the bridge work.

The case and bracelet are executed in high-density black zirconium oxide ceramic, offering a matte-brushed finish that mimics the light-refraction properties of the original. The alternating polished chamfers on the bezel and lugs are sharp, reflecting the high-level integrated bracelet fit expected by seasoned horological enthusiasts.

• Movement: Custom Calibre 3132 Skeleton — Approximately 36 hours
• Case Material: Black Zirconium Oxide Ceramic, 41mm x 9.8mm, 130.9g
• Bezel: Brushed Black Ceramic with polished lateral bevels
• Crystal: Scratch-proof Sapphire with colorless AR coating
• Bracelet: Integrated Black Ceramic with AP folding clasp
• Water Resistance: 30 Meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is ideally suited for the collector who values architectural transparency and the specific tactile feel of ceramic. It handles formal and technical environments with a stealth-luxury aesthetic that avoids the common bulk of lower-tier replicas.

APS Factory Edition — Integrated Stainless Steel Bracelet

APS Factory’s execution of the 41mm Royal Oak Chronograph 26239BC represents a significant technical development in replica horology. By engineering a true integrated clone movement rather than relying on historically flawed modular 7750 bases, this edition achieves the exact 12.0mm case thickness and correct sub-dial spacing required by discerning collectors.

At the heart of this piece is the fully integrated Calibre 4401 super clone. Unlike older modular chronographs, this column-wheel mechanism ensures the date wheel sits flush with the dial surface. The power reserve operates at approximately 36 hours, providing stable daily performance.

The 41mm case is machined from standard stainless steel, carefully exhibiting the brushed/polished alternating finishing characteristic of the Royal Oak line. The black and silver dial features crisp tapisserie texturing, though it is worth noting the genuine 26239BC is cast in 18k white gold, creating a noticeable weight discrepancy against this 169g steel replica.

• Movement: APS Calibre 4401 Integrated Chronograph — Approximately 36 hours
• Case Material: Stainless Steel, 41mm diameter, 51.5mm lug-to-lug, 169g
• Bezel: Stainless steel, precise vertical brushing vs. genuine
• Crystal: Scratch-Resistant Sapphire with AR Coating
• Bracelet: Integrated stainless steel, brushed finish, AP folding clasp
• Water Resistance: Stated 50m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This piece is tailored for the enthusiast who prioritizes mechanical accuracy and correct case proportions over precious metal density. It serves as a highly capable daily wearer that faithfully replicates the tactile experience of a modern integrated chronograph.

APS Factory Edition — Premium Strap

The APS Factory Code 11.59 Tourbillon represents a significant technical leap in replica horology. By successfully cloning the complex octagonal midcase geometry and integrating a functional flying tourbillon, this release addresses the structural shortcomings seen in earlier iterations from generic makers. It stands as a benchmark for collectors seeking the nuanced architecture of modern Audemars Piguet.

Powered by a highly specialized custom manual-winding flying tourbillon movement, this caliber features a rotating escapement at 6 o’clock that serves as both a functional timing regulator and a visual centerpiece. The skeletonized architecture faithfully recreates the genuine layout, offering stable amplitude and sweeping motion. Power reserve is regulated to approximately 36 hours.

The 41.0mm two-tone case architecture utilizes brushed and polished alternating finishing to highlight the openworked lugs and ultra-thin bezel. The simulated meteorite dial elements are protected by the signature double-curved sapphire crystal, providing the distinct optical depth characteristic of the genuine reference.

• Movement: Custom Manual Wind Flying Tourbillon — Approximately 36 hours
• Case Material: Two-Tone Structure, 41.0mm diameter, [unconfirmed] lug-to-lug, 83.1g weight
• Bezel: Two-Tone smooth bezel, highly polished finish
• Crystal: Double-curved sapphire crystal with internal anti-reflective coating
• Bracelet: Premium strap with AP folding clasp
• Water Resistance: 30m — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

This piece is engineered for the discerning enthusiast who appreciates avant-garde case construction and high-complication mechanics. Its demanding architecture makes it a compelling conversation piece for formal and smart-casual environments.

APSF Edition — Integrated Steel Bracelet

APSF’s iteration of the 50th-anniversary 26240ST resolves the long-standing architectural limitations of Royal Oak chronograph replicas. By abandoning the modified Valjoux 7750 base, this release achieves the genuine-spec 12.0mm case thickness and accurate sub-dial spacing, setting a distinct benchmark for this reference within the collector community.

The custom-built Super Clone 4401 selfwinding integrated chronograph is the mechanical core of this piece. It features a fully functional flyback mechanism, a column wheel, and a vertical clutch system for crisp pusher engagement. Operating smoothly at 28,800 vph, it delivers approximately 36 hours of power reserve, ensuring mechanical parity with modern horological standards while avoiding the date-wheel depth issues of older calibers.

Crafted from 316L stainless steel, the 41mm case exhibits precise geometric tolerances with meticulous brushed/polished alternating finishing. The Khaki Green Grande Tapisserie dial features precise guilloché squares with deeply recessed, sunburst-finished sub-dials, accurately capturing the military-inspired tone of the genuine release.

• Movement: Super Clone 4401 Integrated Chronograph — Approximately 36 hours
• Case Material: 316L Stainless Steel, 41mm diameter, 51.5mm lug-to-lug, 169g
• Bezel: 316L Stainless Steel, brushed with polished chamfers
• Crystal: Sapphire with colorless anti-reflective coating
• Bracelet: Integrated 316L steel, brushed finish, double deployant clasp
• Water Resistance: Stated 50m rating — professional pressure test recommended before swimming

This reference appeals to collectors who require an integrated steel sports chronograph that adheres strictly to factory dimensions. The military green tone provides a versatile, understated presence on the wrist.

APSF Edition — Integrated Ceramic Bracelet

The APS Factory (APSF) edition of the Audemars Piguet Royal Oak Chronograph 26240CE represents a significant technical milestone in ceramic replica manufacturing. Historically, full ceramic models suffered from incorrect case profiles due to the reliance on modified base calibers, but this specific release resolves that structural limitation with precision milling.

Powered by the custom-engineered Super Clone 4401 caliber, this is a fully integrated chronograph rather than a modular decoration. The architecture correctly positions the balance wheel at the 7 o’clock orientation, mirroring the genuine layout and allowing for the accurate 12.4mm case thickness. Operating at 28,800 vph, it delivers a steady beat rate with authentic pusher feel.

The 41mm case is executed in high-tech black ceramic, providing exceptional scratch resistance paired with industry-leading brushed and polished alternating finishing. The dial features an accurate Grande Tapisserie pattern, contrasted by rose gold-toned hands and applied indices, while the dark aesthetic remains true to the genuine piece.

• Movement: Super Clone 4401 Integrated Chronograph — Approximately 36 hours
• Case Material: High-tech Black Ceramic, 41mm, ~50.4mm lug-to-lug, 160.8g
• Bezel: Full black ceramic, vertical brushing with mirror-polished flanks
• Crystal: Sapphire with colorless anti-reflective coating
• Bracelet: Integrated high-tech black ceramic with AP folding clasp
• Water Resistance: 50m (Stated) — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is suited for the collector who demands exacting dimensions and true mechanical integration over superficial aesthetic replication. Its full ceramic construction provides a distinct, stealth-oriented wrist presence.

APS Factory Edition — Integrated Steel Bracelet

The APS Factory iteration of the Audemars Piguet Royal Oak Chronograph reference 26240 represents a significant technical milestone in modern horological replication. By moving away from modular chronograph architectures, APS has successfully engineered a platform that mirrors the physical footprint of the genuine article. This specific release, featuring the commemorative 50th Anniversary rotor and distinct dial aesthetic, addresses the longstanding dimensional compromises that have historically plagued Royal Oak chronograph replicas.

At the core of this reference is the Super Clone 4401 caliber, an integrated flyback chronograph movement designed to replicate Audemars Piguet’s proprietary architecture. Unlike modified Valjoux bases, this clone utilizes a vertical clutch and column wheel setup, ensuring crisp pusher actuation and eliminating the characteristic sweep-hand stutter. Power reserve is rated at approximately 36 hours under standard daily wear conditions. The movement’s structural fidelity is what permits the correct sub-dial spacing, a detail heavily scrutinized by collectors.

Machined from solid 316L stainless steel, the 41mm case achieves the exact 12.4mm thickness of the genuine piece, a direct benefit of the integrated movement. The dial exhibits the signature Grande Tapisserie guilloché pattern, rendered here in a deep plum purple tone. Crucially, the custom caliber allows the date window to sit flush against the minute track at the 4:30 position, correcting a glaring tell found on earlier iterations. The brushed/polished alternating finishing across the octagonal bezel and integrated bracelet fit demonstrates tight manufacturing tolerances.

• Movement: Super Clone 4401 Integrated Flyback — Approximately 36 hours
• Case Material: 316L Stainless Steel, 41mm diameter, 51.5mm lug-to-lug, 167.8g weight
• Bezel: Vertical Brushed 316L Steel, accurate recessed hexagonal screw alignment
• Crystal: Scratch-resistant Sapphire with colorless AR coating
• Bracelet: Integrated 316L Steel, chamfered edges, AP double deployant clasp
• Water Resistance: 30m stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is tailored for the collector who demands exacting case proportions and functional parity in a high-complication replica. It commands a distinct presence on the wrist, suited for environments where mechanical scrutiny is expected, bridging the gap between aesthetic homage and technical replication.