Tudor Super Clone Watches

Black Bay 58, GMT & Pelagos — Clone MT5400 & Snowflake Hand Specifications

The Tudor super clone collection — spanning the full Black Bay lineage from the compact 37mm BB54 to the GMT and Chrono complication references. Tudor occupies a distinct position between Rolex-derived heritage and independent tool-watch engineering. Our collection covers the matte-anodised aluminium bezel Black Bay series, the grade 2 titanium Pelagos, and the Black Bay GMT with its 24-hour complication — each built to the dimensional specification of the genuine reference.

Tudor Super Clone References

Black Bay 54 (37mm) — The most faithful to Tudor’s 1954 diver aesthetic. Clone Cal. MT5400 architecture, 37mm case with 46mm lug-to-lug, correct no-guard crown profile, matte anodised aluminium bezel insert, Snowflake hour hand geometry. Three-link riveted bracelet or rubber strap
Black Bay 58 (39mm) — The primary Black Bay reference since 2018. Clone Cal. MT5400 architecture, 39mm case, gilt or monochrome dial variants, domed crystal, matte anodised bezel. Correct 47mm lug-to-lug on steel five-link bracelet
Black Bay GMT / Black Bay 58 GMT — 24-hour hand with bidirectional bezel for dual time zone tracking. Clone Cal. MT5652 architecture, correct Pepsi or black-and-burgundy bezel configuration, independent hour hand adjustment without stopping the seconds
Pelagos (M25600) — Grade 2 titanium case and bracelet producing the correct sub-100g weight versus a steel equivalent. Bead-blasted matte-grey surface finish, ceramic unidirectional bezel insert with luminescent fill, self-adjusting bracelet
Black Bay Chrono (41mm) — Column-wheel chronograph with correct sub-dial register layout, tactile pusher resistance, and bronze or steel case configuration. Bronze references use authentic bronze alloy that develops natural surface oxidation over time

Collector Notes: Snowflake Geometry & Bezel Finishing

The two primary inspection criteria on a Tudor Black Bay super clone are the Snowflake hand profile and the bezel finish. The Snowflake hour hand carries a square-tipped geometry with luminous fill — the fill must be even across the full square cross-section with no voids or recessed areas visible under magnification. Uneven lume is the most commonly cited defect in collector reviews of Black Bay replicas.

The Black Bay bezel insert uses matte anodised aluminium rather than the polished ceramic of a Rolex Submariner. This distinction is critical: the bezel must absorb light rather than reflect it, and the graduation markings carry a slightly raised profile distinct from a ceramic insert’s engraved channels. On the Pelagos, the inspection criterion is weight — a correctly built titanium super clone should feel noticeably lighter on the wrist than a steel reference of similar dimensions. Every piece is verified against macro-reference images as part of our pre-shipment quality control process, with bezel rotation click resistance and lateral play tested before dispatch.

21 Products

Filters

Tudor Super Clone Watches 1:1 Black Bay M7941A1A0RU-0003 Black Dial 41mm
Original price was: $980.00.Current price is: $680.00.
ZF Edition — 316L Stainless Steel Five-Link Bracelet

The ZF Edition Tudor Black Bay M7941A1A0RU-0003 represents the pinnacle of modern dive watch replication, capturing the 2023 third-generation design evolution. Long recognized across horological forums as the definitive manufacturer for the 41mm Black Bay line, ZF has meticulously updated this release down to its most nuanced architectural changes. This specific timepiece combines a contemporary Master Chronometer-inspired layout with a newly refined, matured burgundy anodized aluminum bezel and a sleek five-link steel bracelet.

At the core of this timepiece beats a dedicated custom clone MT5602-U automatic caliber, operating at a smooth 28,800 vibrations per hour. Engineered specifically to eliminate the intermediate ‘ghost date’ position found in lower-tier standard movements, it delivers a true time-only crown execution with excellent daily stability. The power reserve is rated at approximately 42 hours, ensuring consistent amplitude and enhanced reliability during regular wear.

The upgraded 41mm case is machined from solid 316L stainless steel, featuring a significantly re-engineered slim profile that reduces thickness to a comfortable 13.6mm. Weighing approximately 162g, the alternating brushed and polished surfaces perfectly mimic the ergonomic wrist presence of the genuine article. The sunray satin black dial features an elegant radiating finish under the domed sapphire crystal, serving as a striking canvas for the gilt hands and indices filled with high-performance Swiss-grade Super-LumiNova.

Movement: Custom MT5602-U Clone Caliber (No Ghost Date) — Approximately 42 hours

Case Material: 316L Stainless Steel, 41mm diameter, 13mm thickness, ~158g weight

Bezel: New-generation matte burgundy anodized aluminum insert, 60-click unidirectional

Crystal: High-dome sapphire crystal with colorless anti-reflective coating

Bracelet: Brushed and polished five-link steel bracelet

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Designed for the collector who appreciates the subtle refinement of modern luxury sports styling paired with historic color palettes. This piece transitions flawlessly from professional office environments to active weekends.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay 58 GMT m7939g1a0nru-0001 Black Dial 39mm
Original price was: $980.00.Current price is: $680.00.
ZF Edition — Riveted Stainless Steel Bracelet

The ZF Tudor Black Bay 58 GMT (m7939g1a0nru-0001) represents a significant technical milestone in replica horology, successfully miniaturizing the GMT complication into the highly sought-after 39mm case format. By achieving the precise 12.4mm thickness of the genuine piece, ZF has eliminated the historical bulk associated with earlier Tudor GMT clones, establishing a new benchmark for wearability on medium and smaller wrists. The factory’s attention to the specific vintage proportions makes this iteration a standout in the current collector market.

Powered by a modified Asian clone automatic movement, this caliber features a true independently adjustable GMT hand for tracking a second time zone. The architecture operates at 28,800 vibrations per hour, delivering smooth sweeping action for the signature Snowflake hands while maintaining stable amplitude. Power reserve is rated at approximately 36 hours, providing reliable daily performance when worn regularly.

The 39mm case is milled from solid 316L stainless steel, featuring precise alternating brushed and polished surfaces that transition seamlessly into the vintage-inspired riveted bracelet. The bidirectional anodized aluminum Coke bezel accurately captures the muted black and burgundy tones of the original, complete with gilt numerals. On the domed matte black dial, the rose gold-tone hour markers and minute track exhibit excellent print depth, exuding a warm mid-century aviation aesthetic.

Movement: Asian Clone Automatic GMT — Approximately 36 hours

Case Material: 316L Stainless Steel, 39mm diameter, 12.4mm thickness, 150g weight

Bezel: Bidirectional anodized aluminum black and burgundy insert with gilt numerals

Crystal: Domed sapphire with interior anti-reflective coating

Bracelet: 316L stainless steel riveted 3-link, brushed and polished finish with folding clasp

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This piece appeals to collectors who appreciate mid-century aviation aesthetics but require modern mechanical reliability. The reduced 12.4mm case profile makes it an exceptionally versatile travel watch for wrists of all sizes, offering serious horological merit without the bulk.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Chrono m79360n-0019 Pink Dial 41mm
Original price was: $1,250.00.Current price is: $750.00.
ZF Edition — 5-Link Stainless Steel Bracelet

The release of the ZF Tudor Black Bay Chrono Pink captures the highly sought-after retro aesthetic of the m79360n-0019 reference. Known within the community for its accurate dial pigmentation, ZF avoids the overly saturated tones found in early batches, delivering the correct muted, dome-shaped pink lacquer that balances vintage motorsport heritage with modern streetwear appeal.

Powered by a modified Asian 7750 automatic chronograph caliber, this movement is specifically adapted to reflect the genuine MT5813 architecture, featuring the correct 45-minute counter at the 3 o’clock position. The power reserve is approximately 36 hours. The familiar reverse panda layout integrates deeply recessed black sub-dials against the pink background, maintaining excellent visual contrast.

Machined from 316L stainless steel, the case measures 41mm in diameter with a verified thickness of 15.0mm and a total weight of 175g. It is fitted with the newly introduced 5-link (Jubilee-style) stainless steel bracelet, offering superior articulation and a more refined wrist presence compared to traditional three-link Oyster variants.

Movement: Modified Asian 7750 Chronograph — Approximately 36 hours

Case Material: 316L Stainless Steel, 41mm diameter, 15.0mm thickness, 175g weight

Bezel: Fixed stainless steel with black anodized aluminum tachymeter insert

Crystal: Domed sapphire crystal with internal anti-reflective coating

Bracelet: 5-link 316L stainless steel, alternating brushed and polished finish

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference appeals to collectors seeking a high-contrast, conversational sports chronograph. Its 5-link bracelet provides a more articulating fit, making the 15.0mm case profile sit comfortably on medium to large wrists.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay M79230R-0012 Black Dial 41mm
Original price was: $980.00.Current price is: $680.00.
ZF Edition — 316L Stainless Steel Rivet Bracelet

The ZF Edition Tudor Black Bay M79230R-0012 represents the pinnacle of vintage-inspired dive watch replication. Long recognized across horological forums as the definitive manufacturer for the 41mm Heritage line, ZF has meticulously recreated the second-generation Black Bay down to its most nuanced details. This specific release captures the essence of 1950s dive watch aesthetics, combining the modern shield logo with the historically significant matte burgundy anodized aluminum bezel.

At the core of this timepiece beats a highly reliable Asian 2824-2 automatic movement, operating at a smooth 28,800 vibrations per hour. Chosen for its robust architecture and ease of servicing, this caliber provides excellent daily stability and longevity. The power reserve is rated at approximately 36 hours, ensuring consistent amplitude during regular wear.

The 41mm case is machined from solid 316L stainless steel, featuring alternating brushed and polished surfaces that reflect the rugged yet refined nature of the genuine article. Weighing exactly 177g and measuring 15.0mm in thickness, the tactile experience on the wrist is virtually indistinguishable from retail counterparts. The matte black domed dial serves as the perfect canvas for the rose gold-tone gilt hour markers and the iconic snowflake hands, all generously coated with high-performance luminous material.

Movement: Asian 2824-2 Automatic Caliber — Approximately 36 hours

Case Material: 316L Stainless Steel, 41mm diameter, ~50mm lug-to-lug, 177g weight

Bezel: Matte burgundy anodized aluminum insert, 60-click unidirectional

Crystal: Domed sapphire crystal with colorless anti-reflective coating

Bracelet: 316L stainless steel stepped rivet bracelet with folding clasp

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Designed for the collector who appreciates mid-century dive watch aesthetics paired with modern manufacturing tolerances. This piece seamlessly transitions from casual weekend wear to subtle office environments.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay 54 M79000-0001 Blue Dial 37mm
Original price was: $1,250.00.Current price is: $750.00.
ZF Edition — Five-Link Stainless Steel Bracelet

The ZF Tudor Black Bay 54 Lagoon Blue (M79000-0001) represents a significant technical milestone in replicating the brand’s modern 37mm dive watch architecture. By meticulously adhering to the 11.2mm case thickness and 46mm lug-to-lug profile, this edition captures the precise vintage tool watch proportions of the 1954 original while integrating contemporary finishing techniques.

Powered by the reliable Asian 2824 automatic clone movement, this caliber provides a robust and easily serviceable foundation for daily wear. Operating at 28,800 vibrations per hour, it ensures a smooth sweep for the signature Snowflake seconds hand, delivering an expected power reserve of Approximately 36 hours.

Constructed from premium 316L stainless steel, the case integrates a unique full mirror-polished steel bezel with negative relief numerals, completely eschewing the aluminum insert found on the black variant. The micro-grain sandy texture of the Lagoon Blue dial is accurately reproduced, offering subtle light play under the domed sapphire crystal without resorting to inaccurate sunburst effects.

Movement: Asian 2824 Automatic Clone — Approximately 36 hours

Case Material: 316L Stainless Steel, 37mm diameter, 46mm lug-to-lug

Bezel: Mirror-polished stainless steel with negative relief scale

Crystal: Domed sapphire crystal with colorless anti-reflective coating

Bracelet: Five-link 316L steel with T-fit rapid adjustment clasp

Water Resistance: 50m Stated — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Designed for collectors with smaller wrists or those seeking an understated, historically proportioned diver. The 37mm diameter and ultra-thin profile allow it to function effortlessly as a daily wearer that slips easily under a shirt cuff.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay GMT m79830rb-0010 White Dial 41mm
Original price was: $1,280.00.Current price is: $780.00.
ZF Edition — Stainless Steel Rivet Bracelet

The ZF iteration of the white-dial Black Bay GMT stands out in the replica market for its precise execution of the opaline finish. Rather than defaulting to a flat white, the factory has successfully replicated the faint metallic galvanic electroplating luster of the genuine dial, complete with the darkened hand and marker edges required for optimal contrast.

Mechanically, this piece relies on a custom Asian automatic GMT caliber engineered to deliver True GMT functionality. The local hour hand jumps independently in one-hour increments, driving the date wheel forward or backward, faithfully mirroring the genuine MT5652 architecture. Power reserve is approximately 36 hours.

The 41mm 316L stainless steel case features an accurate 14.6mm thickness, balancing mirror-polished flanks with fine sand-brushed top surfaces. Its bidirectional 48-click bezel utilizes a matte burgundy and deep blue anodized aluminum insert, capturing the vintage aesthetic of golden-age aviation timepieces.

Movement: Custom Asian True GMT Caliber — Approximately 36 hours

Case Material: 316L Stainless Steel, 41mm diameter, 14.6mm thickness

Bezel: 48-click bidirectional, matte burgundy and deep blue anodized aluminum

Crystal: Domed scratch-resistant sapphire with AR coating

Bracelet: 3-link rivet steel with traditional fold-over safety clasp

Water Resistance: Stated 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the collector who appreciates vintage aviation aesthetics, this reference offers a highly legible, historically inspired profile suitable for daily wear and global travel.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay m7941a1a0nu-0003 Black Dial 41mm
Original price was: $980.00.Current price is: $680.00.
ZF Factory Edition — 5-Link Stainless Steel Bracelet

ZF Factory’s execution of the 2024 Black Bay Monochrome completely abandons the vintage gilt aesthetic for a strictly modern, high-contrast silver and black profile. By accurately replicating the updated 13.6mm case thickness, this release resolves the notorious slab-sided profile of previous 41mm iterations, allowing it to sit much closer to the wrist and slide effortlessly under a cuff.

Powered by a reliable Asian custom automatic mechanical movement, this caliber provides stable timekeeping while omitting the ghost date position to match the genuine no-date architecture. It delivers an operational power reserve of approximately 36 hours, maintaining consistent amplitude across its winding cycle.

Machined from 316L stainless steel, the 41mm case features refined chamfering and integrates seamlessly with the 5-link Jubilee-style bracelet. The matte black domed dial is paired with rhodium-plated Snowflake hands and pure white Super-LumiNova, perfectly matching the monochromatic anodized aluminum bezel insert.

Movement: Asian Custom Automatic Caliber — Approximately 36 hours

Case Material: 316L Stainless Steel, 41mm diameter, 21mm lug width

Bezel: Black Anodized Aluminum with silver engraved markers

Crystal: Domed scratch-resistant sapphire with anti-reflective coating

Bracelet: 5-Link 316L stainless steel with T-fit style folding clasp

Water Resistance: 50 meters — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

This reference serves as a versatile daily wearer for enthusiasts who appreciate Tudor’s dive watch heritage but prefer a cooler, contemporary color palette. Its slimmer profile and articulated bracelet make it highly adaptable to both casual and formal settings.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Pro m79470-0001 Black Dial 39mm
Original price was: $1,220.00.Current price is: $720.00.
ZF Factory Edition — Rivet-Style Stainless Steel Bracelet

The ZF Tudor Black Bay Pro M79470-0001 represents a significant milestone in replica manufacturing, specifically addressing the unique dial architecture of the genuine reference. Widely recognized on RWI and RepTime as the benchmark for this model, ZF has successfully engineered the borderless, monobloc luminous ceramic hour markers that define the Black Bay Pro, avoiding the metal-surround shortcuts seen in earlier iterations from competing factories.

Powering this reference is an Asian custom automatic GMT mechanical movement, designed to mimic the traveler’s GMT functionality of the genuine Tudor caliber. It features a jumping local hour hand that links directly to the date mechanism, allowing for rapid timezone adjustments without stopping the seconds hand. The power reserve for this mechanism is approximately 36 hours.

Machined from 316L stainless steel, the 39mm case accurately retains the genuine’s substantial 14.6mm thickness, a necessary byproduct of the stacked GMT movement architecture. The matte black dial provides stark contrast to the accurately color-matched, muted yellow GMT hand, while the 24-hour fixed bezel exhibits a precise radial circular brushed finish with deep black oil-filled numerals.

Movement: Asian Custom Automatic GMT — Approximately 36 hours

Case Material: 316L Stainless Steel, 39mm diameter, 20mm lug width, 14.6mm thickness

Bezel: Fixed 24-hour stainless steel, radial brushed with black oil-filled numerals

Crystal: Domed (bubble) scratch-resistant sapphire crystal

Bracelet: 316L stainless steel 3-link rivet style, stepped rivet structure

Water Resistance: 50m daily life waterproof — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is ideal for collectors seeking a highly capable, vintage-inspired tool watch with true GMT functionality. Due to its historically accurate 14.6mm thickness, it possesses significant wrist presence and weight, favoring medium to larger wrist profiles.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Pro m79470-0004 White Dial 39mm
Original price was: $1,220.00.Current price is: $720.00.
ZF Factory Edition — Riveted 316L Steel Bracelet

The ZF Factory release of the Tudor Black Bay Pro M79470-0004 represents a highly anticipated benchmark in the replica tool watch sector. Notably recognized across collector forums for its precise replication of the newly introduced 2025 Opaline dial, this iteration successfully captures the granular, matte micro-white electroplated finish that lesser factories often misrepresent as a flat, glossy white.

Powering this reference is a customized Asian automatic GMT mechanical movement, engineered to support the jumping hour hand complication for seamless date adjustment. This architecture closely mimics the functional operation of the genuine MT5652 caliber, providing robust reliability while maintaining an operational power reserve of approximately 36 hours.

Constructed from 316L stainless steel, the 39mm case maintains the authentic, albeit substantial, 14.6mm profile necessitated by the dual-time movement architecture. The fixed 24-hour brushed steel bezel frames the standout feature: monobloc, borderless ceramic luminous hour markers with accurate black outlining, offering exceptional three-dimensional depth and striking contrast against the stark dial.

Movement: Custom Asian Automatic GMT — Approximately 36 hours

Case Material: 316L Stainless Steel, 39mm diameter, 20mm lug width, 14.6mm thickness

Bezel: 24-hour fixed brushed stainless steel with enamel-filled numerals

Crystal: Domed scratch-resistant sapphire with inner anti-reflective coating

Bracelet: 316L steel three-link riveted bracelet with T-fit style folding clasp

Water Resistance: 50m rated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the enthusiast who appreciates robust, vintage-inspired aesthetics paired with modern proportions. Its stark legibility and utilitarian profile make it a highly capable companion for daily wear and rigorous travel.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay 54 m79000n-0001 Black Dial 37mm
Original price was: $980.00.Current price is: $680.00.
ZF Edition — Stepped Rivet Bracelet

The ZF Tudor Black Bay 54 represents a highly specific technical achievement in the replica market, accurately executing the restrained 37mm case proportions of the original Reference 7922 from 1954. By committing to an independent 1:1 case mold rather than adapting existing Black Bay 58 architecture, ZF has achieved the correct 11.2mm thickness, eliminating the bulky wrist presence often associated with modern dive watches.

Powering this reference is a modified Asian Seagull automatic movement. ZF has specifically addressed a common collector grievance by removing the date wheel mechanism entirely, ensuring a true no-date operation with no ‘ghost’ crown position. The movement delivers a reliable beat rate with a power reserve of approximately 36 hours.

The dial and bezel execution demonstrates careful attention to vintage horology. The matte black anodized aluminum bezel correctly omits the minute hash marks between 1 and 15, while the black gilt dial features precise rose gold-tone printing. Notably, ZF has accurately implemented the vintage-correct baton seconds hand, contrasting with the traditional snowflake hour hand.

Movement: Modified Asian Seagull Automatic — Approximately 36 hours

Case Material: 316L Stainless Steel, 37mm diameter, 11.2mm thickness

Bezel: Matte black anodized aluminum, vintage specification (no 0-15 minute hashes)

Crystal: Domed sapphire crystal with anti-reflective treatment

Bracelet: 316L steel, 3-link stepped rivet profile with folding safety clasp

Water Resistance: 50m rated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is ideal for collectors with smaller wrists or purists who favor the understated, strictly utilitarian aesthetic of early mid-century dive instruments.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Bronze M79250BB-0001 Blue Dial 43mm
Original price was: $1,280.00.Current price is: $780.00.
ZF Factory Edition — Blue Fabric Jacquard Strap

The ZF Factory iteration of the Tudor Black Bay Bronze M79250BB-0001 stands as the definitive benchmark for this Bucherer 130th Anniversary special edition. By utilizing a true 1:1 aluminum bronze alloy rather than standard brass, ZF ensures the case develops a correct dark, matte oxidation layer (patina) over time without the undesirable green verdigris common in lower-tier replicas.

Powering this reference is the Asian custom Sea-Gull 2824 automatic movement, selected for its robust reliability and ease of serviceability. While some high-end configurations feature MT5601 decorative bridges, the underlying architecture remains the proven 2824 clone, delivering consistent timekeeping and a power reserve of approximately 36 hours.

The commanding 43mm case features a substantial 14.6mm thickness, offering a pronounced, masculine wrist presence. ZF accurately replicates the unique Bucherer Blue matte micro-grain dial, applying the vintage-inspired 3-6-9 Arabic numeral layout alongside generously filled Super-LumiNova snowflake hands. To prevent skin discoloration, the caseback is correctly executed in bronze-colored PVD stainless steel.

Movement: Asian Sea-Gull 2824 Automatic Clone — Approximately 36 hours

Case Material: Aluminum Bronze Alloy, 43mm diameter, 23mm lug width, ~14.6mm thickness

Bezel: Unidirectional stainless steel core with matte blue anodized aluminum insert

Crystal: Domed (pot cover) scratch-resistant sapphire crystal

Bracelet: Blue fabric jacquard strap with central bronze-colored stripe and bronze pin buckle

Water Resistance: 50m stated rating — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Designed for collectors who appreciate heavy, utilitarian tool watches that age dynamically. The 43mm diameter and 23mm lugs demand a larger wrist, rewarding the wearer with a highly personalized, evolving patina.
Read more
Tudor Super Clone Watches 1:1 Black Bay Bronze M79250BM-0005 Brown Dial 43mm
Original price was: $1,280.00.Current price is: $780.00.
ZF Factory Edition — Distressed Leather / Jacquard Fabric

The ZF Factory edition of the Tudor Black Bay Bronze M79250BM-0005 is widely regarded across horological replica forums as the benchmark for this specific reference. Utilizing a true 1:1 aluminum bronze alloy rather than standard brass, it accurately captures the unique oxidation and patina process of the genuine piece without developing undesirable green rust.

Powering this 43mm piece is the highly reliable Asian Custom Seagull 2824 automatic movement. This caliber is chosen for its rugged stability and low maintenance costs, operating at a steady 28,800 vph to ensure a smooth sweep of the rose gold-edged Snowflake hands.

The case boasts a commanding 43mm diameter with a substantial 14.6mm thickness, delivering significant wrist presence. Its vintage-inspired matte brown Tropical dial features the distinctive 3-6-9 Explorer layout, closely matched with a brown anodized aluminum bezel insert and heavily applied Super-LumiNova.

Movement: Asian Custom Seagull 2824 Automatic — Approximately 36 hours

Case Material: 1:1 Aluminum Bronze Alloy, 43mm diameter, 23mm lug width, 14.6mm thickness

Bezel: Unidirectional bronze bezel with brown anodized aluminum insert

Crystal: Domed scratch-resistant sapphire crystal

Bracelet: Distressed vintage leather or jacquard fabric strap with bronze pin buckle

Water Resistance: 50m stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This imposing 43mm bronze tool watch is ideal for larger wrists and collectors who appreciate the interactive nature of a case that develops a personalized patina over time. It offers an authentic vintage aesthetic rooted in mid-century nautical exploration.
Read more
Tudor Super Clone Watches 1:1 Pelagos 25600TN Black Dial 42mm MT5612 Movement
Original price was: $980.00.Current price is: $680.00.
ZF Edition — Titanium Bracelet

The ZF iteration of the Tudor Pelagos 25600TN stands as a definitive benchmark due to its 1:1 independent molding of genuine titanium. By utilizing true titanium for both the case and bracelet, ZF captures the exact matte dark grey aesthetic and lightweight profile of the genuine tool watch, resulting in a piece that weighs only 140 to 145 grams—significantly lighter than comparable stainless steel dive watches.

Powering this reference is the Asian Custom Sea-Gull 2824 automatic movement, equipped with decorative plates to emulate the MT5612 caliber architecture. This workhorse movement is favored by collectors for its robust reliability and ease of servicing by any competent watchmaker. Power reserve is rated at approximately 36 hours.

The 42mm case maintains an accurate 14.3mm thickness, featuring a fully lumed matte black ceramic bezel insert. The dial exhibits the signature sloped inner chapter ring with recessed 3D indices, perfectly complemented by the iconic Snowflake hands and a heavy application of blue Super-LumiNova® for maximum legibility.

Movement: Asian Custom Sea-Gull 2824 (MT5612 decorated) — Approximately 36 hours

Case Material: True Titanium, 42mm diameter, [unconfirmed] lug-to-lug, 140-145g weight

Bezel: Titanium ring with matte black ceramic insert, full Super-LumiNova application

Crystal: Sapphire crystal with high-transparency colorless AR coating

Bracelet: True Titanium, matte brushed finish, replica auto-adjusting spring clasp

Water Resistance: 50m rated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Ideal for enthusiasts seeking a highly technical, purpose-built dive tool without the substantial wrist fatigue associated with traditional steel cases. Its matte finish and clinical legibility make it a versatile companion for demanding environments.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Bronze M79250BA-0001 Slate Grey Dial 43mm
Original price was: $1,280.00.Current price is: $780.00.
ZF Edition — Vintage Leather or Jacquard Fabric Strap

The ZF Tudor Black Bay Bronze M79250BA-0001 stands as a highly respected benchmark within the replica community, primarily due to its masterful execution of the case material. Unlike inferior replicas that utilize brass or gold-plated steel, ZF employs a high-grade aluminum bronze alloy that accurately mimics the genuine’s aging process, developing a rich, dark patina over time without the undesirable green verdigris associated with cheaper metals.

At the heart of this timepiece is the Asian custom Seagull 2824 automatic movement, a proven workhorse caliber selected for its long-term reliability and ease of regulation. This movement provides a stable 28,800 vph beat rate, ensuring the signature snowflake hands sweep smoothly across the dial. Power reserve is approximately 36 hours, aligning with standard clone ETA specifications.

The 43mm case commands a significant wrist presence, measuring approximately 14.6mm thick. The dial is a standout feature, exhibiting a precise gradient slate grey tone that darkens toward the outer edges, perfectly complemented by the vintage 3-6-9 Arabic numeral layout. A domed anti-scratch sapphire crystal and a PVD bronze-plated stainless steel caseback complete the historically inspired yet technically modern architecture.

Movement: Asian Custom Seagull 2824 Automatic — Approximately 36 hours

Case Material: Aluminum Bronze Alloy, 43mm diameter, 23mm lug width

Bezel: Slate Grey anodized aluminum insert over stainless steel core

Crystal: Domed (pot cover shape) anti-scratch sapphire

Bracelet: Distressed vintage leather or slate grey jacquard fabric with bronze pin buckle

Water Resistance: 50m stated rating — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

This reference is uniquely suited for collectors who appreciate the dynamic, evolving nature of a true tool watch. The 43mm dimensions require a larger wrist to sit comfortably, offering a rugged, uncompromising aesthetic.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Fifty-Eight M79030b-0001 Blue Dial 39mm
Original price was: $1,220.00.Current price is: $720.00.
ZF Factory Edition — Riveted 316L Stainless Steel Bracelet

The ZF iteration of the Tudor Black Bay Fifty-Eight M79030B-0001 stands as a consensus benchmark within the horological replica community. By successfully reverse-engineering the highly praised 39mm case architecture, ZF eliminated the slab-sided thickness that plagued earlier 41mm diver replicas, achieving the exact 11.9mm profile of the genuine article.

Powering this reference is the robust Asian Seagull 2824 automatic caliber, a proven workhorse that offers excellent reliability and ease of service. Select batches feature decorative plates mimicking the genuine MT5402 architecture. The movement delivers a steady beat rate and provides a power reserve of approximately 36 hours.

Crafted from premium 316L stainless steel, the case exhibits a highly refined transition between the polished flanks and satin-brushed upper lugs. The dial is a masterclass in color accuracy, capturing the precise matte navy blue tone with a subtle granular texture, paired seamlessly with silver-bordered Snowflake hands and an anodized aluminum unidirectional bezel.

Movement: Asian Seagull 2824 Automatic (MT5402 decoration) — Approximately 36 hours

Case Material: 316L Stainless Steel, 39mm diameter, 20mm lug width, 140-145g full weight

Bezel: Blue anodized aluminum insert with silver markers and white luminous pearl

Crystal: Domed sapphire crystal with colorless anti-reflective coating

Bracelet: 316L stainless steel riveted bracelet with traditional fold-over safety clasp

Water Resistance: 50m daily waterproof — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Designed for collectors who appreciate vintage-inspired proportions, this 39mm tool watch slips effortlessly under a tailored cuff while maintaining a commanding, cold-toned presence on the wrist.
Add to cart
Tudor Super Clone Watches 1:1 Black Bay Fifty-Eight M79030N-0001 Black Dial 39mm
Original price was: $980.00.Current price is: $680.00.
ZF Factory Edition — Riveted 316L Stainless Steel Bracelet

The ZF Factory Black Bay Fifty-Eight (M79030N-0001) has long been regarded by the replica community as a benchmark release, frequently achieving consensus as a tier-one replication. By precisely matching the 39mm diameter and the critical 11.9mm case thickness of the genuine 1958 tribute, ZF eradicated the bulky profile that plagued previous 41mm heritage diver clones. This specific iteration captures the nuanced vintage aesthetic of the original Reference 7924, balancing the matte black dial with highly accurate gilt (rose gold-tone) text and the signature red triangle at the 12 o’clock bezel position.

Powering this reference is the reliable Asian 2824 automatic movement, operating at a smooth 28,800 vibrations per hour. Unlike complex proprietary clone movements, the 2824 architecture offers exceptional long-term serviceability and accepts genuine ETA replacement parts. Some high-tier batches feature decorative MT5402 movement plates, though the underlying mechanics remain the robust 2824 base. The movement delivers a standard power reserve of approximately 36 hours, ensuring consistent amplitude during daily wear.

Crafted from solid 316L stainless steel, the case exhibits a highly refined alternating finish: mirror-polished flanks contrasting with fine satin-brushed upper lugs. The domed matte black dial is executed without a date window, guaranteeing perfect symmetry and eliminating the risk of misaligned calendar fonts. The iconic Snowflake hands and geometric hour markers are treated with creamy Super-LumiNova, emitting a consistent glow in low-light conditions while maintaining a warm, aged appearance in daylight.

Fitted with a true-to-era riveted stainless steel bracelet, the watch features the distinctive stepped side links and a traditional fold-over safety clasp. At a fully linked weight of approximately 142 grams (sizing down to roughly 135 grams for average wrists), it offers a highly ergonomic and unobtrusive presence on the wrist.

Movement: Asian 2824 Automatic — Approximately 36 hours

Case Material: 316L Stainless Steel, 39mm diameter, 20mm lug width, 142g total weight

Bezel: Unidirectional stainless steel with matte black anodized aluminum insert and red triangle

Crystal: Domed sapphire crystal with internal anti-reflective coating

Bracelet: 316L stainless steel riveted bracelet with traditional fold-over safety clasp

Water Resistance: 50m — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Ideal for collectors with smaller to average wrists who appreciate mid-century tool watch proportions. Its slim profile allows it to slide effortlessly under a dress shirt cuff, making it a highly versatile mechanical companion for both formal and casual settings.
Add to cart

Load More All products loaded.