Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 2
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 3
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 4
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 5
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 6
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 7
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 8
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 9
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 10
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 11
Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap - Image 12

Richard Mille Super Clone Watches 1:1 RM 027 – 03 Tourbillon Rafael Nadal Yellow Strap

Original price was: $2,099.00.Current price is: $1,499.00.

JB Factory Edition — Bright Yellow Velcro Strap

The JB Factory RM 027-03 Rafael Nadal represents a notable technical achievement in replica horology, successfully mirroring the complex red and yellow Quartz TPT composite case. Unlike earlier iterations that relied on surface paint, this release utilizes high-pressure layered quartz fibers to achieve the correct micro-matte texture and irregular wave patterns characteristic of the genuine article.

Powering this ultra-light reference is a custom RM27-03 manual-winding real tourbillon movement. Situated at 6 o’clock, the rotating escapement is fully functional, abandoning the static balance wheels and faux plates of lower-tier replicas. It operates at a steady beat rate and delivers a reliable power reserve of approximately 36 hours.

Measuring 40.30mm by 47.77mm with a thickness of exactly 13.0mm, the case houses a prominent ‘bull head’ V-shaped titanium skeleton bridge. The entire assembly, secured to the wrist via a bright yellow high-density velcro strap, weighs a mere 43 grams, closely emulating the featherweight engineering of the authentic Spanish Matador-inspired piece.

  • Movement: Custom RM27-03 Manual Tourbillon — Approximately 36 hours
  • Case Material: Layered Composite Quartz Fiber (Red/Yellow Quartz TPT®), 40.30mm x 47.77mm, 43g
  • Bezel: Red/Yellow Quartz TPT® with Grade 5 Titanium Screws
  • Crystal: Scratch-Proof Sapphire with Colorless AR Coating
  • Bracelet: Bright Yellow High-Density Lightweight Braided Velcro
  • Water Resistance: 30m Stated (Nitrile O-ring) — professional pressure test recommended before swimming. Do not operate the crown while the watch is submerged.

Designed for collectors who appreciate avant-garde materials and true mechanical complexity. Its ultra-light profile makes it an unobtrusive companion for active wear, while the exposed tourbillon demands horological respect.

FAQ’s
Collector's Privilege Acquire this timepiece and earn $74 USD in Reward Credits.
$ USD
  • $ USD
  • € EUR
  • £ GBP
Category:

Description

JB Factory Richard Mille RM 027-03 Rafael Nadal Tourbillon

The definitive benchmark for the RM 027-03, combining genuine high-pressure Quartz TPT layering with a fully functional manual-winding tourbillon escapement.

Powered by Custom RM27-03 Manual Tourbillon

The mechanical core of this replica is a bespoke manual-winding tourbillon caliber designed specifically to fit the RM 027-03 chassis. Positioned prominently at 6 o’clock, the tourbillon cage rotates continuously, allowing the escapement and hairspring to be observed in motion. The movement is secured by a dominant ‘bull head’ V-shaped titanium alloy bridge, which JB Factory has finished using layered cutting and sandblasting techniques, complete with precise white micro-tracing along the edges to enhance three-dimensional depth. This meticulous attention to detail ensures the movement passes our strict QC standards for skeletonized architectures.

⏱ Accuracy Profile:

Regulated to ±10–15 seconds per day. The tourbillon escapement provides stable chronometry across various positional variants, though manual winding habits will influence daily variance.

  • ✅ Power Reserve: Approximately 36 hours
  • ✅ Complications: Real one-minute tourbillon, skeletonized barrel display
  • ✅ Winding Direction: Manual winding via crown

Technical Specifications

THE BUILDRed/Yellow Quartz TPT®

Constructed via high-pressure layering of quartz fibers, achieving the signature Spanish flag motif. The case measures 40.30mm x 47.77mm with a thickness of 13.0mm, bringing the total weight to an astonishingly light 43 grams.

THE DIALSkeletonized V-Bridge

Dominated by the titanium ‘bull head’ bridge, the dial lacks a traditional baseplate, exposing the mainspring barrel and gear train. Handset clearance is precisely calibrated to avoid interference with the elevated bridge.

THE CROWNTennis Ball Carbon Fiber

The 3 o’clock crown is shaped like a tennis ball, machined from carbon fiber and wrapped in polyurethane rubber. It provides a tactile, damped resistance during manual winding.

THE STRAPHigh-Density Velcro

Fitted with a bright yellow, lightweight braided velcro strap that conforms tightly to the wrist, emphasizing the athletic, shock-resistant ethos of the Nadal lineage.

Why JB Factory for This Reference?

Many collectors ask: ‘Why not BBR Factory?’

While BBR produces highly capable RM tourbillons, JB Factory’s mastery of the red and yellow Quartz TPT layering makes it the superior choice for the RM 027-03. JBF avoids the muddy color blending seen in alternative batches, keeping the Spanish flag-inspired wave striations distinct and tactile. Furthermore, JBF’s execution of the V-shaped skeleton bridge offers sharper sandblasting and more accurate white micro-tracing.

Full Disclosure: Due to the complex nature of the custom tourbillon and the heavy polyurethane rubber gaskets inside the crown, manual winding exhibits a stiffer, slightly grittier resistance compared to the effortless winding action of a genuine Richard Mille caliber.

LIVE PREVIEW

Data Sheet

MODEL REFERENCE RM 027-03 Tourbillon Rafael Nadal
FACTORY / VERSION JB Factory Edition
MOVEMENT Custom RM27-03 Manual Tourbillon
CASE MATERIAL Composite Quartz Fiber (Red/Yellow Quartz TPT®)
WEIGHT & THICKNESS 43 g | 13.0 mm
CRYSTAL & HARDWARE Scratch-Proof Sapphire | Grade 5 Titanium Screws
DIMENSIONS 40.30 mm × 47.77 mm × 13.0 mmManual measurements — minor tolerances apply.
WATER RESISTANCE 30m (Nitrile O-ring) — professional pressure test recommended before swimming

Collector Q&A

Q: How close is the red and yellow case material to the genuine RM 027-03?

A: JB Factory uses a high-pressure layered composite quartz fiber to mimic the proprietary Quartz TPT. This achieves a highly accurate micro-matte feel and distinct, irregular wave patterns, successfully avoiding the cheap painted look found on lower-tier replicas. However, under heavy macro magnification, the exact density of the striations will differ slightly from the genuine material.

Q: Is the tourbillon fully functional or just an exposed balance wheel?

A: It is a genuine, fully functional manual-winding tourbillon. Positioned at 6 o’clock, the entire escapement assembly rotates on its axis. It is not a static faux plate or a standard open-heart balance wheel.

Q: What is the actual weight of this replica?

A: The JB Factory version weighs exactly 43 grams. It achieves this ultra-light profile through the use of the composite Quartz TPT case, a titanium skeleton bridge, and the lightweight high-density velcro strap.

Q: Does the manual-winding tourbillon require special care during operation?

A: Yes. Because the custom tourbillon is a delicate mechanical assembly and the tennis-ball crown utilizes heavy polyurethane rubber gaskets for moisture resistance, the winding action will feel stiffer than standard calibers. You should wind it slowly and deliberately, stopping immediately once you feel firm resistance to avoid over-tensioning the mainspring.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

  • Super Clone Watches – Richard Mille 53-01 Tourbillon Pablo Mac Donough

    Richard Mille Super Clone Watches 1:1 53-01 Tourbillon Pablo Mac Donough

    Original price was: $1,999.00.Current price is: $1,399.00.

    JB Factory Edition — Sky Blue Fluoroelastomer Strap

    JB Factory’s Richard Mille RM 53-01 Pablo Mac Donough stands as a technical benchmark in the replica market, primarily due to its functional cable-suspension architecture. Unlike earlier iterations that relied on static decorative bridges to mimic the original design, this release utilizes a genuine 0.27mm steel cable system. These micro-cables are routed meticulously through four tensioners and ten distinct pulleys, accurately mimicking the original’s complex shock-absorbing framework.

    At its core beats a custom-developed manual-winding true tourbillon caliber. Positioned prominently at 6 o’clock, the 1:1 proportioned tourbillon escapement oscillates without the obstruction of faux decorative plates or superficial gears, offering a highly mechanical visual experience. Power reserve is approximately 36 hours, sustained by the oversized mainspring barrel visible at the top of the skeletonized dial.

    The tripartite case is constructed from genuine TPT carbon fiber, exhibiting the distinctive Damascus-like stratified layering synonymous with modern Richard Mille references. Measuring 43.0mm by 49.0mm with a 16.2mm profile, the entire watch weighs an exceptionally light 63 grams. The Sky Blue accents on the hands, crown, and inner barrel sharply contrast the dark TPT weave, protected by a specialized laminated sapphire crystal equipped with a polyethylene anti-explosion film.

    • Movement: Custom Manual Winding True Tourbillon — Approximately 36 hours
    • Case Material: TPT Carbon Fiber, 43.0mm x 49.0mm, 63g
    • Bezel: TPT Carbon Fiber with Damascus-style stratified texture
    • Crystal: Laminated Sapphire with Polyethylene Anti-Explosion Film
    • Bracelet: Sky Blue Fluoroelastomer with folding clasp
    • Water Resistance: 30 Meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

    Designed for the avant-garde collector, this piece offers an uncompromising look into hyper-horology. Its extreme lightness and vibrant summer aesthetic make it a formidable statement piece for casual and active wear.

    Add to cart
  • Super Clone Watches – Richard Mille RM 66 Red Strap

    Richard Mille Super Clone Watches 1:1 RM 66 Freedom Proclaimed Tourbillon Red Strap

    Original price was: $1,999.00.Current price is: $1,399.00.
    [video width="1920" height="1080" mp4="https://newclonewatches.com/wp-content/uploads/2024/10/o1712490451_6281_1.mp4"][/video]
    Add to cart
  • Richard Mille Super clone watches 1:1 RM 07-01Rose Gold Diamond dial Black strap

    Richard Mille Super clone watches 1:1 RM 07-01Rose Gold Diamond dial Black strap

    Original price was: $1,899.00.Current price is: $1,199.00.

    Add to cart
  • Super Clone Watches – Richard Mille  RM27 - 02 Red

    Richard Mille Super Clone Watches 1:1 RM 27 – 02 Red 41.5mm

    Original price was: $2,199.00.Current price is: $1,499.00.

    Model:RM27-02
    Movement Model: Tourbillon Movement
    Movement Type: Manual Machinery
    Case Size: 41.5*50.5*15mm
    Case Material:Carbon Fibre
    Mirror Material:Scratch-Proof Sapphire

    [video width="1920" height="1440" mp4="https://newclonewatches.com/wp-content/uploads/2024/09/wsxc1726707349056_0.mp4"][/video]
    Add to cart

Richard Mille Super Clone Watches 1:1 RM 027 - 03 Tourbillon Rafael Nadal Yellow Strap

Original price was: $2,099.00.Current price is: $1,499.00.