-
Original price was: $1,849.00.$1,349.00Current price is: $1,349.00.QF Factory Edition — Oysterflex Strap
The introduction of the QF Factory tungsten-weighted Daytona marks a critical shift in the replication of precious metal references. By integrating a dense tungsten alloy core, this 126518LN achieves a mass of approximately 150 grams, directly addressing the historical tactile discrepancy of lightweight steel replicas.
At its core lies the SH4131 clone caliber, engineered with a fully functional vertical clutch chronograph mechanism. This movement correctly replicates the updated rotor aesthetics and bridge layout of the 2023+ generation, operating with stable amplitude and a realistic chronometric profile.
The 40mm case is plated in 18k yellow gold and features the sunburst black dial with contrasting champagne sub-dials. QF has accurately captured the thinner sub-dial rings specific to the 126xxx series, while the black Cerachrom bezel features the correct new-generation metallic outer rim.
- Movement: SH4131 Clone Caliber — Approximately 36 hours
- Case Material: Tungsten Alloy Core with 18k YG Plating, 40mm x 46.5mm, ~150g
- Bezel: Black Cerachrom with 18k YG plated metallic rim
- Crystal: Scratch-resistant sapphire with anti-reflective coating
- Bracelet: Oysterflex elastomer strap with Oysterlock safety clasp
- Water Resistance: 30m rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the collector who prioritizes authentic wrist weight and new-generation aesthetic accuracy. The added mass provides a wearing experience that standard steel iterations cannot replicate.
Select options This product has multiple variants. The options may be chosen on the product page -
Original price was: $1,899.00.$1,299.00Current price is: $1,299.00.VSF Edition — Solid Oyster Bracelet
The VSF Rolex Daytona Ref. 126508-0003 addresses the most persistent critique of full-gold replicas: the tactile deficit in weight. By engineering the case and bracelet core from a high-density Tungsten-Steel alloy, this edition achieves a mass of approximately 183g, successfully bridging the gap between standard 140g replicas and the 200g genuine article. This structural density is paired with a highly accurate Bright Black and Golden dial, complete with synthetic diamond chatons.
At its core operates the Dandong Calibre 4131 Super Clone, a sophisticated automatic chronograph mechanism featuring a true vertical clutch and column wheel architecture. Unlike inferior modified movements, this caliber supports full sub-dial functionality and crisp pusher engagement, all while meeting our strict QC standards for amplitude and beat error.
The 40mm exterior is finished with an 18K Yellow Gold PVD wrap, meticulously color-matched to Rolex’s proprietary gold hue. The integration of the Glidelock clasp mechanism ensures precise micro-adjustments, while the Chromalight application on the hands provides the correct blue emission in low-light environments.
- Movement: Dandong Calibre 4131 Super Clone — 60+ Hours (Dandong clone caliber)
- Case Material: Tungsten-Steel Alloy with 18K Yellow Gold PVD, 40mm diameter, 46.5mm lug-to-lug, 183g weight
- Bezel: 18K Yellow Gold PVD with engraved tachymetric scale
- Crystal: Scratch-resistant sapphire with internal AR coating
- Bracelet: Tungsten-weighted Oyster bracelet with folding Oysterlock safety clasp and Easylink extension
- Water Resistance: 30m stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the collector who demands the physical gravity of a precious metal timepiece without the genuine market premium. The added mass provides a convincing on-wrist experience that standard steel-based replicas cannot replicate.
-
Original price was: $1,899.00.$1,399.00Current price is: $1,399.00.VSF Edition — V3 Seamless Tungsten-Weighted Oyster Bracelet
VSF’s 2026 edition of the M126506 Daytona achieves a horological milestone by integrating a high-density tungsten alloy to reach 176 grams without compromising the genuine 12.1mm case profile. Unlike earlier iterations that relied on thickened cases or hollow links to simulate heft, this advanced architecture correctly distributes the mass across the watch head and the seamless V3 bracelet. The result is a mechanical alternative that provides the tactile presence of precious metal while maintaining the precise ergonomic footprint of the original reference.
At the core operates the meticulously decorated VSF 4131 Dandong clone caliber, fully visible through the reference-correct sapphire exhibition caseback. This integrated chronograph movement features an 18K gold-plated skeletonized rotor, refined bridge finishing, and delivers a robust 60+ Hours (Dandong clone caliber) of power reserve. The column-wheel mechanism ensures crisp pusher engagement and immediate reset of the central sweeping seconds hand.
The 40mm case utilizes 904L Oystersteel fused with tungsten, paired with a chestnut brown ceramic bezel featuring platinum dust-filled tachymeter engravings for optimal legibility. The Ice Blue sunburst dial accurately captures the cold, piercing tone exclusive to Rolex’s platinum tier, complemented by properly applied Chromalight indices that emit a consistent blue glow in low-light conditions.
- Movement: VSF 4131 Dandong Clone Caliber — 60+ Hours (Dandong clone caliber)
- Case Material: 904L Oystersteel & Tungsten Alloy, 40mm x 46.5mm, 176g
- Bezel: Chestnut Brown Ceramic, accurate tone shifting with platinum dust scale
- Crystal: Scratch-resistant sapphire with colorless anti-reflective coating
- Bracelet: V3 Seamless Tungsten-weighted 904L Oyster, stamped Oysterlock clasp
- Water Resistance: 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This reference serves the collector seeking the heft and presence of solid platinum without the associated premium. Its exact 12.1mm thickness ensures it slides gracefully under a tailored cuff, offering an understated yet technically profound wearing experience.
-
Original price was: $1,999.00.$1,449.00Current price is: $1,449.00.VSF Edition — V3 Weighted Oyster Bracelet
The VSF iteration of the reference 126506 represents a significant structural achievement in modern replica manufacturing. By integrating a high-density tungsten-steel alloy core, this release achieves a mass of approximately 176 grams without compromising the gen-spec 12.1mm case profile. This addresses the primary tactile discrepancy historically found in platinum-tier Daytona replicas, offering a substantial heft that standard 904L steel models lack.
At the heart of this model is the Dandong 4131 clone caliber, visible through the reference-correct sapphire exhibition caseback. Unlike modified ETA movements, this true clone architecture features a fully operational column-wheel and vertical clutch, ensuring crisp chronograph actuation. The caliber is finished with an 18K gold-plated rotor and delivers a reliable 60+ Hours (Dandong clone caliber) of continuous operation.
The visual profile is defined by its signature sunburst Ice Blue dial, punctuated by baguette-cut moissanite hour markers set in chatons. The chestnut brown Cerachrom bezel features the correct metallic edge ring specific to the 126506 generation, while the V3 seamless center links on the Oyster bracelet maintain strict manufacturing tolerances.
- Movement: Dandong 4131 Auto Chronograph — 60+ Hours (Dandong clone caliber)
- Case Material: 904L Oystersteel with Tungsten Alloy Core (40mm x 46.5mm, ~176g)
- Bezel: Chestnut Brown Cerachrom Ceramic with Steel Edge Ring
- Crystal: Scratch-resistant Sapphire with interior AR coating
- Bracelet: V3 Weighted Oyster Bracelet with Easylink extension
- Water Resistance: 30m Stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the collector who demands mechanical accuracy and physical presence. The weighted architecture provides a premium tactile feedback that bridges the gap between traditional steel replicas and genuine precious metal pieces.
-
Original price was: $1,849.00.$1,249.00Current price is: $1,249.00.Clean Factory Edition — Oyster Bracelet
The Clean Factory execution of the 126505-0003 Daytona stands as a prominent benchmark within the current replica market. By utilizing a 904L Oystersteel core beneath a thick 18k rose gold plating, this piece captures the visual profile of Rolex’s Everose alloy while maintaining structural rigidity. The Sundust dial variant is particularly notable for its restrained sunburst finish, avoiding the overly metallic sheen found in earlier iterations.
The Calibre 4131 clone movement represents a significant structural update over the previous 4130 generation. It incorporates a decorative bridged architecture, an updated rotor bearing system, and functional KIF shock absorbers, mirroring the genuine escapement setup. Power delivery is linear, and the power reserve is tested at Approximately 36 hours.
Machined to exact 40mm specifications, the case maintains the slim 11.9mm profile of the genuine 1265xx series. The dial exhibits correct subdial proportions, while the Chromalight indices provide accurate, long-lasting blue luminescence in low-light conditions. The solid end links fit flush against the case, minimizing unwanted endplay on the Oyster bracelet.
- Movement: Calibre 4131 Clone — Approximately 36 hours
- Case Material: 18k Rose Gold Plated 904L Steel, 40mm diameter, 46.5mm lug-to-lug, ~145g
- Bezel: 18k Rose Gold Plated, accurate tachymetric engraving
- Crystal: Scratch-resistant sapphire with anti-reflective coating and laser-etched crown
- Bracelet: 18k Rose Gold Plated Oyster with folding safety clasp
- Water Resistance: 50 meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This reference appeals to collectors seeking the aesthetic warmth of rose gold without the heavy capital allocation of a solid precious metal piece. It handles formal and smart-casual environments effectively, though owners should be mindful of abrasive surfaces to preserve the plating.
-
Original price was: $1,949.00.$1,349.00Current price is: $1,349.00.VSF Edition — Oyster Bracelet
VSF’s iteration of the Cosmograph Daytona 126505-0005 integrates the updated 4131 clone architecture into a precise 11.7mm case. Collectors have closely monitored this release for its accurate case profile and the integration of the newer movement generation, moving away from the older 4130 base. The weight distribution, measuring at 178.7 grams, provides substantial wrist presence while maintaining correct structural proportions.
Powered by the Dandong 4131 clone caliber, this mechanism offers a 1:1 bridge layout with functional vertical clutch chronograph engagement. Unlike previous iterations, this updated architecture includes the revised rotor design and modified escapement geometry, yielding consistent amplitude and reliable timing. The movement operates with a smooth pusher feel comparable to the genuine article.
The 40mm case is constructed from 904L Oystersteel, vacuum electroplated with 18K rose gold. The dial presents a deep chocolate brown sunburst finish that shifts accurately under direct lighting, contrasted by crisp black subdials and rose gold accents. Finishing on the fixed tachymeter bezel and Oyster bracelet links exhibits sharp transitions between brushed and polished surfaces.
- Movement: Dandong Super Clone 4131 Automatic — 60+ Hours (Dandong clone caliber)
- Case Material: 904L Oystersteel with 18K rose gold plating, 40mm diameter, 178.7g weight
- Bezel: Fixed tachymeter scale, polished rose-gold tone
- Crystal: Scratch-resistant Sapphire with correct AR coating profile
- Bracelet: Oyster bracelet with solid links and folding Oysterlock safety clasp
- Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This piece serves collectors evaluating the aesthetic of a precious metal Daytona without the secondary market premium. Its precise 11.7mm profile ensures it slides effortlessly under a dress cuff, maintaining the exact wearability of the genuine reference.
-
Original price was: $1,849.00.$1,249.00Current price is: $1,249.00.Clean Factory Edition — Oyster Bracelet
The Clean Factory iteration of the Rolex Daytona M126508-0004 represents the current benchmark for the new-generation 4131-equipped references. Recognized across horological forums for its precise 18K yellow gold plating tone, this piece avoids the overly brassy hue often found in earlier iterations.
It houses a dedicated 1:1 clone of the Calibre 4131, distinguishing itself from modified 4130 movements by integrating the updated rotor bridge and KIF shock absorbers. The chronograph functions seamlessly, with the vertical clutch ensuring a crisp engagement of the central seconds hand without noticeable stutter.
Crafted from 904L Oystersteel enveloped in a robust gold plating, the 40mm case maintains genuine proportions. The deep black dial features accurately stepped sub-dials and correctly applied Chromalight indices, offering excellent legibility against the dark background.
- Movement: Calibre 4131 Clone — Approximately 36 hours
- Case Material: 904L Oystersteel (18K Gold Plated), 40mm diameter, 46.5mm lug-to-lug, ~145g
- Bezel: 18K Gold Plated 904L Steel, accurate engraved tachymetric scale
- Crystal: Sapphire with colorless anti-reflective coating
- Bracelet: 18K Gold Plated Oyster bracelet, Oysterlock safety clasp
- Water Resistance: 50 meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This heavy-hitting yellow gold reference is suited for enthusiasts seeking the presence of a precious metal chronograph without the genuine market premium. It performs capably in formal settings while retaining the utilitarian roots of a racing timer.
-
Rolex Super Clone Watches 1:1 Daytona Rose Gold Brown Dial M126515LN-0010 4131 Movement Rubber Strap
Original price was: $1,949.00.$1,349.00Current price is: $1,349.00.QF Edition — Oysterflex Elastomer Strap
The QF 126515LN establishes a benchmark in the precious metal replica category by addressing the most common collector critique: weight. By integrating a tungsten alloy core, this case achieves a substantial 155g mass, closely mimicking the tactile heft of solid Everose gold on the wrist.
At its core operates the SH4131 clone caliber, engineered specifically to replicate the updated 12-series architecture. It features the revised bridge layout and modernized rotor design, delivering reliable chronograph functionality while maintaining a power reserve of approximately 36 hours.
Constructed from 904L Oystersteel beneath its 18k rose gold PVD coating, the 40mm case correctly integrates the new metal-rimmed Cerachrom bezel. The chocolate sunburst dial, exhibiting deep #6b3e26 tones under direct light, is finished with the refined, slimmer hour markers and authentic Chromalight luminescence.
- Movement: SH4131 Clone Caliber — Approximately 36 hours
- Case Material: 904L Oystersteel with Tungsten Alloy Core, 40mm, 155g
- Bezel: Black Cerachrom Ceramic with 18k Rose Gold PVD Rim
- Crystal: Scratch-resistant Sapphire with AR coating
- Bracelet: Oysterflex Elastomer Strap with Glidelock Clasp
- Water Resistance: 30m Stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the discerning collector who prioritizes accurate physical weight and the updated 12-series aesthetics in a modern chronograph profile.
Select options This product has multiple variants. The options may be chosen on the product page -
Original price was: $1,949.00.$1,349.00Current price is: $1,349.00.VSF Edition — Oyster Bracelet
VSF’s iteration of the white gold Daytona M126509-0005 stands out in the replica market due to its 180g tungsten-weighted case construction. This added mass addresses the historical weight discrepancy of precious metal replicas, bringing the tactile experience remarkably close to the genuine 18k white gold piece.
At the core is the highly regarded Dandong 4131 clone caliber. This movement meticulously replicates the genuine architecture with a functional column wheel and vertical clutch mechanism, ensuring precise chronograph engagement and a true-to-gen hand stack. Power reserve is reliably tested at 60+ Hours (Dandong clone caliber).
The 40mm case is crafted from a tungsten-weighted alloy finished with 18k white gold plating to achieve the necessary heft and visual tone. The sunburst blue dial features crisp typography and properly recessed sub-dials equipped with Chromalight luminescence, protected by a scratch-resistant sapphire crystal with anti-reflective coating.
- Movement: Dandong 4131 Clone — 60+ Hours (Dandong clone caliber)
- Case Material: 180g Tungsten-Weighted Alloy with 18k White Gold Plating
- Bezel: 18k White Gold Plated Alloy, fixed tachymetric scale
- Crystal: Scratch-Resistant Sapphire with Anti-Reflective Coating
- Bracelet: Tungsten-weighted Oyster bracelet with folding Oysterlock safety clasp
- Water Resistance: 30m Stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This reference appeals to collectors seeking the substantial feel of a precious metal chronograph without the genuine market premium. Its versatile profile transitions appropriately from formal settings to casual wear.
-
Original price was: $1,949.00.$1,349.00Current price is: $1,349.00.VSF Edition — Oysterflex Strap
The VSF release of the reference 126515LN represents a significant structural shift in replica chronographs, utilizing a 150g tungsten-weighted case to bridge the mass discrepancy inherent in precious metal clones. This specific iteration addresses the longstanding collector demand for a heavy-weight Everose Daytona that feels correct on the wrist.
At the core of this reference is the custom Dandong 4131 Super Clone caliber, engineered specifically to mirror Rolex’s 2023 movement architecture update. Featuring a genuine column-wheel and vertical clutch, it delivers a precise chronograph engagement without the jitter associated with modified 7750 bases.
The 40mm case is plated in 18k Everose gold, achieving a highly accurate rose gold tone that responds dynamically to ambient light. Paired with a ceramic Cerachrom bezel and a scratch-resistant sapphire crystal featuring superior AR coating, the visual fidelity remains strictly clinical.
- Movement: Dandong 4131 Super Clone — 60+ Hours (Dandong clone caliber)
- Case Material: 150g Tungsten-Weighted Stainless Steel (18k Everose Gold Plated), 40mm diameter, 46.5mm lug-to-lug
- Bezel: Black Cerachrom ceramic with rose gold-plated tachymetric scale
- Crystal: Scratch-resistant Sapphire with advanced AR coating
- Bracelet: Oysterflex elastomer strap with Everose-plated folding Oysterlock safety clasp and Glidelock extension
- Water Resistance: 30m rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the discerning collector who requires the tactile mass of a precious metal piece without compromising on movement stability. This reference excels in both formal and casual scenarios, anchored by the versatile Oysterflex integration.
Select options This product has multiple variants. The options may be chosen on the product page -
Original price was: $1,849.00.$1,249.00Current price is: $1,249.00.Clean Factory Edition — Oyster Bracelet
Clean Factory’s execution of the 126509-0002 reference stands as a benchmark for modern Daytona replicas, specifically regarding the integration of the new Calibre 4131 architecture. While the genuine piece utilizes solid 18k white gold, this iteration relies on 904L Oystersteel, presenting a noticeable weight deficit but achieving excellent visual parity in its case geometry and polished finish.
At the core lies the 1:1 Clone Calibre 4131, featuring the updated oscillating weight with optimized ball bearings and KIF shock absorbers. Unlike previous 4130 iterations, this movement incorporates the revised bridge layout and Paramagnetic blue Parachrom hairspring architecture, ensuring crisp chronograph actuation via its column wheel.
The 40mm case maintains the precise 11.9mm thickness of the genuine counterpart. The dial, accented with diamond-set hour markers, exhibits sharp subdial printing and correct sunray finishing, though the brilliance of the synthetic stones naturally differs from factory-set Rolex diamonds under magnification.
- Movement: Clone Calibre 4131 — Approximately 36 hours
- Case Material: 904L Oystersteel, 40mm diameter, 46.5mm lug-to-lug, ~145g
- Bezel: 904L Oystersteel, precise engraved tachymetric scale
- Crystal: Scratch-resistant sapphire with laser-etched crown at 6 o’clock
- Bracelet: 904L Oystersteel, polished center links, folding Oysterlock clasp
- Water Resistance: 50 meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This piece serves collectors seeking the aesthetic impact of a precious-metal Daytona without the associated liability. It performs capably in daily wear scenarios, provided the chronograph pushers remain unscrewed only when actively timing.
-
Original price was: $1,829.00.$1,229.00Current price is: $1,229.00.Clean Factory Edition — Two-Tone Oyster Bracelet
The release of the 126503 reference marked a subtle but significant evolution in the Daytona lineage, and this Clean Factory iteration captures those refined case proportions accurately. Recognized across horological forums for its precise execution of the updated sub-dial rings and refined indices, this two-tone model stands as a current benchmark for modern 4131-equipped chronographs.
Inside sits the 1:1 clone of the Rolex Calibre 4131, featuring a fully functional column wheel and vertical clutch architecture. Unlike older 4130 clones, this updated mechanism incorporates the modified bridge layouts and KIF shock absorbers seen in the genuine post-2023 releases. Power reserve is reliably tested at approximately 36 hours.
The 40mm case is machined from 904L Oystersteel with 18K gold-plated accents on the bezel, crown, and center links. The deep black dial contrasts sharply with the gold sub-dials, utilizing authentic Chromalight luminescence for superior low-light visibility.
- Movement: Clone Cal.4131 Automatic Chronograph — Approximately 36 hours
- Case Material: 904L Oystersteel & 18K Gold Plated, 40mm diameter
- Bezel: 18K Gold Plated with engraved tachymetric scale
- Crystal: Scratch-resistant sapphire with laser-etched crown at 6 o’clock
- Bracelet: 904L Oystersteel & 18K Gold Plated Oyster bracelet with folding clasp
- Water Resistance: 50 meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This piece serves collectors seeking the visual warmth of a two-tone chronograph without the premium of solid gold. It transitions seamlessly from formal environments to casual settings, demanding respect through its mechanical competence.
-
Original price was: $1,849.00.$1,249.00Current price is: $1,249.00.Clean Factory Edition — Oyster Bracelet
The transition to the 1265xx series demands precise re-engineering of the asymmetrical case profile and the refined bezel dimensions. Clean Factory’s iteration of the 126508-0006 captures the nuanced 18K yellow gold tone over a 904L Oystersteel core, avoiding the overly brassy hue often found in earlier generation replicas.
Inside beats the meticulously cloned Calibre 4131, reflecting the updated architecture of the genuine movement including the optimized ball bearing rotor. It features a fully functional column-wheel chronograph mechanism and yields a power reserve of approximately 36 hours.
The 40mm case houses a high-contrast deep green dial, protected by a scratch-resistant sapphire crystal with the correct laser-etched coronet at 6 o’clock. The Oyster bracelet integrates smoothly with the case lugs, secured by a well-toleranced folding clasp.
- Movement: Clone Calibre 4131 — Approximately 36 hours
- Case Material: 904L Oystersteel with 18K Gold Plating, 40mm diameter, ~145g
- Bezel: 18K Gold plated fixed tachymeter bezel, accurate scale depth
- Crystal: Sapphire with inner anti-reflective coating
- Bracelet: 904L Oystersteel 18K Gold Plated, Oysterlock safety clasp
- Water Resistance: 50 meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Ideal for the collector seeking the visual presence of a precious metal chronograph without the genuine market premium. This piece commands attention in formal and smart-casual settings alike.
-
Original price was: $1,849.00.$1,399.00Current price is: $1,399.00.QF (Q Factory) Heavyweight Edition — 18K Everose Plated Oyster Bracelet
This specific iteration of the 126505 addresses the most common critique of precious metal replicas: the weight discrepancy. By integrating tungsten within the 904L Oystersteel core, QF achieves a mass of approximately 180 grams, delivering genuine tactile feedback that standard clones fail to replicate.
Powered by the highly regarded Dandong 4131 super clone caliber. This movement represents a significant architectural leap, faithfully mirroring Rolex’s newest generation chronograph with a true column-wheel and vertical clutch system. It ensures crisp pusher engagement and the correct hand stack while maintaining the notably thin profile of the genuine reference.
The 40mm case and Oyster bracelet are treated with an 18K Everose gold plating, achieving a warm, coppery hue that closely mimics the genuine alloy. The black dial features precisely recessed sub-dials with rose gold accents, utilizing correct Chromalight application on the indices and hands. The solid end links and Oysterlock safety clasp operate with tight tolerances, ensuring secure wrist presence.
- Movement: Dandong 4131 Super Clone — Approximately 36 hours
- Case Material: Tungsten-weighted 904L Oystersteel, 40mm diameter, 46.5mm lug-to-lug, ~180g
- Bezel: 18K Everose plated 904L steel with engraved tachymetric scale
- Crystal: Scratch-resistant sapphire with correct AR coating
- Bracelet: 18K Everose plated Oyster bracelet with Oysterlock clasp and Easylink
- Water Resistance: Stated 100m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This heavyweight edition is designed for the collector who values physical presence and tactile authenticity as much as visual accuracy. The substantial mass and advanced 4131 movement make it a highly convincing alternative for those accustomed to wearing genuine precious metal timepieces.
-
Original price was: $1,949.00.$1,349.00Current price is: $1,349.00.Q Factory (QF) Edition — Oysterflex Elastomer Strap
The release of the Q Factory (QF) 126518LN addresses a longstanding technical hurdle in precious metal replica manufacturing: case weight. By utilizing a high-density tungsten-alloy core beneath the 18K yellow gold plating, QF achieves a substantial 159g total weight, closely mimicking the tactile heft of the genuine article on the wrist.
At the core of this reference is the Clone 4131 Automatic Chronograph caliber, an architecture mirroring the updated Rolex movement. It features a fully functional column wheel and vertical clutch for precise engagement, delivering an operational profile consistent with genuine mechanics. The power reserve is approximately 36 hours, ensuring steady amplitude during daily wear.
The 40mm case maintains an impressive 11.2mm ultra-thin profile, ensuring the Oysterflex strap integrates seamlessly with the lugs. The black dial and contrasting gold subdials are rendered with sharp precision, enclosed by a black Cerachrom ceramic bezel with recessed, gold-coated tachymetric graduations.
- Movement: Clone 4131 Automatic Chronograph — Approximately 36 hours
- Case Material: 18K Yellow Gold Plated (Tungsten Core), 40mm, 46.5mm lug-to-lug, 159g
- Bezel: Black Cerachrom Ceramic with gold-plated scale
- Crystal: Scratch-resistant Sapphire with AR coating
- Bracelet: Oysterflex elastomer with 18K YG plated Oysterlock clasp
- Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the collector who prioritizes physical wrist presence and accurate tactile feedback. The weighted case provides an authentic wearing experience that standard steel replicas cannot replicate.
Select options This product has multiple variants. The options may be chosen on the product page -
Original price was: $1,599.00.$1,099.00Current price is: $1,099.00.VSF Edition — 904L Oyster Bracelet
VSF’s iteration of the m116505 Daytona addresses previous market gaps in the Sundust dial tone and sub-dial concentric texturing. Recognized by the replica community for its refined 18k rose gold plating over a solid 904L Oystersteel core, it provides a compelling alternative to genuine Everose. Collectors have noted that this specific batch achieves a refined sunburst effect, capturing the dynamic light play characteristic of the authentic piece.
Powered by the highly regarded 4130 clone caliber, this mechanism mirrors the genuine Rolex architecture with exacting precision. It features a fully functional column wheel and vertical clutch, ensuring crisp chronograph engagement without the seconds hand stutter typical of modified 7750 movements. The integration of a KIF shock absorber and a paramagnetic blue hairspring ensures stable amplitude and reliable daily performance.
The 40mm x 12.2mm case accurately reflects the 2022 genuine profile, maintaining the sleek proportions of the Oyster case. Its Sundust dial features the correct sunray finish, contrasting cleanly against the black sub-dials, while the 144.9g weight offers substantial on-wrist presence. The meticulous finishing extends to the tachymeter bezel, where the engraved numerals exhibit the correct depth and spacing. Furthermore, the scratch-proof sapphire crystal is seated flush with the bezel, incorporating the subtle semi-invisible etched crown at the 6 o’clock position. The application of Chromalight luminescence on the hour markers provides a consistent blue glow in low-light conditions.
- Movement: Caliber 4130 Clone — 60+ Hours (Dandong clone caliber)
- Case Material: 18k Rose Gold Plated 904L Oystersteel, 40mm diameter, 46.5mm lug-to-lug, 144.9g weight
- Bezel: 18k Rose Gold Plated 904L Steel Tachymeter bezel, accurate numeral depth
- Crystal: Scratch-proof sapphire crystal with semi-invisible crown etched at 6:00
- Bracelet: 18k Rose Gold Plated 904L Oyster bracelet, polished center links, flip-lock clasp
- Water Resistance: 50 Meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
This piece serves collectors seeking the visual warmth of an Everose Daytona without the six-figure premium. It operates capably in standard daily wear, though care should be taken to preserve the plated finish from abrasive surfaces.
Official Contact Only: WhatsApp +44 7410 208835 | Email: support@newcwteam.com
