Patek Philippe Super Clone Watches 1:1 Nautilus 5712 Brown Dial Leather Strap

Original price was: $1,749.00.Current price is: $1,249.00.

PPF V3 Edition — Premium Leather Strap

The PPF V3 iteration of the Nautilus 5712R represents a significant milestone in horological replication. By discarding the traditional modified Miyota architecture, PPF achieves the genuine-specification 8.4mm case thickness previously deemed impossible for this complex reference.

Powered by the integrated Super Clone Caliber 240 PS IRM C LU, this movement features a fully functional power reserve, moonphase, and an accurately finished micro-rotor. The mechanism mirrors the genuine Patek Philippe architecture, yielding a power reserve of approximately 36 hours.

The 40mm rose gold plated stainless steel case weighs a verified 87.1g, matching the exact profile of the genuine piece. Its brown dial exhibits correct sunburst finishing and lacquer application, complemented by precisely proportioned indices and a seamless leather strap integration.

  • Movement: Super Clone Caliber 240 PS IRM C LU — Approximately 36 hours
  • Case Material: Rose Gold Plated Stainless Steel, 40mm diameter, 87.1g
  • Bezel: Rose gold plated, accurate vertical brushing vs. genuine
  • Crystal: Scratch-resistant Sapphire with Colorless Anti-Reflective Coating
  • Bracelet: Premium brown leather with deployant clasp
  • Water Resistance: 30m stated — professional pressure test recommended before swimming

This reference appeals to collectors who prioritize mechanical accuracy and ultra-thin profiles over standard three-hand complications. The leather strap configuration offers a more understated, dress-oriented aesthetic.

FAQ’s
Limited-Time Offer: Get $62 USD Reward Credits On This Watch
$ USD
  • $ USD
  • € EUR
  • £ GBP
Category:

Description

PPF Patek Philippe Nautilus 5712R-001 Brown Dial

The PPF V3 establishes the benchmark for the 5712 reference by successfully integrating a true Caliber 240 clone to achieve genuine-matching dimensions.

Powered by Super Clone Caliber 240 PS IRM C LU

The development of this integrated caliber eliminates the need for decorative movement plates layered over a base Miyota 9015. This structural revision allows the case to maintain its ultra-thin profile while retaining full functionality of the moonphase, date, and power reserve indicators. The micro-rotor is properly weighted and finished with perlage and côtes de Genève, operating with noticeably less rotor noise than earlier iterations.

⏱ Accuracy Profile:

Rated at ±5–8 seconds per day. The integrated clone architecture provides stable amplitude when fully wound, though precision may vary slightly as the mainspring tension decreases.

  • ✅ Power Reserve: Approximately 36 hours
  • ✅ Complications: Moonphase, pointer date, power reserve indicator, small seconds
  • ✅ Winding Direction: Unidirectional (micro-rotor)

⚠ Power Reserve Usage Notice

Do NOT over-wind. Stop winding when the Power Reserve hand reaches “48 hours”. Wind 15–20 turns initially; let the micro-rotor maintain from there.

Technical Specifications

THE BUILDRose Gold Plated Stainless Steel

The 40mm diameter and verified 8.4mm thickness represent a 1:1 dimensional match. Alternating brushed and polished surfaces exhibit sharp transitions, weighing in at an accurate 87.1g.

THE DIALBrown Sunburst

The brown dial features accurate horizontal embossing and correct lacquer application, preventing the flat appearance seen in earlier batches. Sub-dial printing is crisp and well-defined.

THE BEZELRose Gold Plated Steel

The iconic octagonal bezel showcases precise vertical brushing with highly polished chamfers, maintaining strict tolerances at the case junction.

THE BRACELETPremium Leather Strap

The strap integrates seamlessly with the case lugs, secured by a well-machined rose gold plated deployant clasp with correct Calatrava cross engraving and smooth locking action.

Why PPF for This Reference?

Many collectors ask: “Why not Miyota-based alternatives?”

Prior versions from other factories relied on Miyota 9015 base movements, which forced the case thickness beyond 9.5mm and often featured faux power reserve indicators. PPF’s proprietary Caliber 240 clone resolves both the dimensional and functional inaccuracies, achieving the strict 8.4mm profile required for the 5712.

Full Disclosure: The rose gold plating, while visually accurate in tone, will naturally wear over time with heavy use, and the delicate power reserve mechanism requires careful handling to avoid over-winding.

Data Sheet

MODEL REFERENCE 5712R-001
FACTORY / VERSION PPF V3 Edition
MOVEMENT Super Clone Caliber 240 PS IRM C LU
CASE MATERIAL Rose Gold Plated Stainless Steel
WEIGHT & THICKNESS 87.1g | 8.4mm
CRYSTAL & LUME Sapphire with Colorless AR | Super-LumiNova
DIMENSIONS 40mm × 44mm × 8.4mmManual measurements — minor tolerances apply.
WATER RESISTANCE 30m stated — professional pressure test recommended before swimming

Collector Q&A

Q: Does the power reserve indicator actually work on the PPF V3?

A: Yes. Unlike earlier Miyota-based replicas that featured fixed or faux indicators, the PPF V3 integrated Caliber 240 features a fully functional power reserve hand that accurately tracks the mainspring tension.

Q: How does the 8.4mm thickness compare to the genuine 5712R?

A: The verified 8.4mm thickness of the PPF V3 matches the genuine Patek Philippe specification exactly. This 1:1 profile is only possible due to the custom integrated clone movement, which eliminates the need for thick decorative plates.

Q: Is the moonphase functional or just a day/night indicator?

A: The moonphase on the PPF V3 is fully functional and operates on a true lunar cycle. It is adjusted via the recessed pusher on the side of the case, replicating the operation of the genuine caliber.

Q: What is the primary vulnerability of this specific clone movement?

A: The power reserve module is delicate. Manually over-winding the watch past the ’48’ mark on the indicator can jam or break the mechanism. It is critical to stop winding immediately when the indicator shows full.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Patek Philippe Super Clone Watches 1:1 Nautilus 5712 Brown Dial Leather Strap

Original price was: $1,749.00.Current price is: $1,249.00.