Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 2
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 3
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 4
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 5
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 6
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 7
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 8
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 9
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 10
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 11
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 12
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 13
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 14
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 15
Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding - Image 16

Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding

Original price was: $1,150.00.Current price is: $929.00.

APS Factory Edition — Integrated Stainless Steel Bracelet

APS Factory (APSF) has established the current benchmark for the Royal Oak 15510 reference, specifically through their mastery of the integrated bracelet geometry and case finishing. This white dial 41mm variant represents a significant technical leap over previous iterations, primarily due to the elimination of modular movement architecture.

At the core of this piece is the true 1:1 Super Clone Calibre 4302. Unlike older replicas that relied on a base Miyota fitted with thick decorative plates, APSF engineered this movement from the ground up. This native architecture ensures the correct 28,800 vph beat rate, proper jewel placement, and allows the case to maintain the genuine 10.2mm profile without crown height discrepancies.

The 41mm case is milled from 316L stainless steel, featuring the signature alternating brushed and polished finishing that defines the Royal Oak line. The white “Grande Tapisserie” dial exhibits correct guilloché depth, though the tonal variance under direct light is a known metric among collectors. The integrated bracelet tolerances are notably tight, minimizing lateral play.

  • Movement: Super Clone Calibre 4302 — Approximately 36 hours
  • Case Material: 316L Stainless Steel, 41.0mm diameter, 51.5mm lug-to-lug, ~165g
  • Bezel: 316L Stainless Steel, octagonal with aligned white gold-plated screws
  • Crystal: Scratch-Resistant Sapphire with Colorless AR Coating
  • Bracelet: Integrated 316L Stainless Steel, alternating finish, AP double deployant clasp
  • Water Resistance: 50m stated — have the case pressure-tested by a professional prior to swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is suited for collectors who prioritize structural accuracy and movement architecture over superficial aesthetics. The 41mm integrated case wears larger than traditional round watches, requiring a wrist size that can accommodate its distinct lug-to-lug span.

FAQ’s
Collector's Privilege Acquire this timepiece and earn $46 USD in Reward Credits.
$ USD
  • $ USD
  • € EUR
  • £ GBP
Category:

Description

APSF Audemars Piguet Royal Oak 15510ST White Dial

The definitive 41mm Royal Oak replica, distinguished by its natively integrated Calibre 4302 and correct 10.2mm case profile.

Powered by True 1:1 Clone Calibre 4302

The APSF Calibre 4302 represents a paradigm shift in AP replicas. By discarding the Miyota base and decorative module plates, APS Factory achieved the genuine 10.2mm case thickness and aligned the crown perfectly with the case center. The movement features correct bridge architecture, a functional free-sprung balance wheel simulation, and a bidirectional winding rotor. We subject these calibers to our strict QC standards to ensure optimal amplitude and beat error before dispatch.

⏱ Accuracy Profile:

±5–8 seconds per day (typical for well-regulated APSF clone 4302 movements).

  • ✅ Power Reserve: Approximately 36 hours
  • ✅ Complications: Center hours, minutes, sweeping seconds, and instantaneous quick-set date
  • ✅ Winding Direction: Bidirectional

Specifications in Detail

THE BUILD316L Stainless Steel

41mm diameter and a precise 10.2mm thickness. The case exhibits the correct ratio of vertical brushing to high-polish chamfers along the lug edges.

THE DIALWhite “Grande Tapisserie”

Features correct square proportions and concentric circle texturing, with applied white gold-plated hour markers filled with Swiss Super-LumiNova.

THE BEZEL316L Stainless Steel

Signature octagonal shape with heavy vertical brushing and eight perfectly recessed, polished structural screws.

THE BRACELETIntegrated Stainless Steel

Exceptional articulation with tight tolerances between the brushed links and polished center studs, secured by a crisp double deployant AP clasp.

The Case for APS Factory

Many collectors ask: “Why not ZF Factory?”

While ZF produces excellent dials, APSF holds the definitive edge in movement architecture and case thickness for the 15510 and 15500 series. The true clone 4302 in the APSF eliminates the noisy Miyota rotor and the added thickness of a deco plate, resulting in a watch that feels mechanically closer to genuine.

In the Interest of Honesty: The white dial tapisserie can occasionally exhibit a slightly more metallic sheen under harsh fluorescent lighting compared to the flat, snowy white of the OEM dial, and the rotor remains faintly audible in completely silent environments.

LIVE PREVIEW

Specification Sheet

MODEL REFERENCE 15510ST.OO.1320ST.08
FACTORY / VERSION APS Factory Edition
MOVEMENT Super Clone Calibre 4302
CASE MATERIAL 316L Stainless Steel
WEIGHT & THICKNESS ~165g | 10.2mm
CRYSTAL & LUME Sapphire with Colorless AR | Swiss Super-LumiNova
DIMENSIONS 41.0mm × 51.5mm × 10.2mmHand-measured specifications; expect minor variance.
WATER RESISTANCE 50m stated — have the case pressure-tested by a professional prior to swimming

Common Collector Questions

Q: How does the APSF Calibre 4302 differ from older Royal Oak replicas?

A: Older versions used a base Miyota 9015 movement with a decorative plate glued on top, which increased the case thickness and misaligned the crown. The APSF uses a natively built clone of the Calibre 4302, allowing for the correct 10.2mm case profile and proper crown position.

Q: Is the bracelet interchangeable with genuine AP links?

A: While the APSF bracelet is engineered to 1:1 dimensions with excellent tolerances, mixing replica and genuine links is not recommended due to microscopic variances in pin hole diameters and brushed finishing grains.

Q: Does the date wheel font match the genuine 15510?

A: Yes, APSF has updated the date wheel typography for the 15510 release, ensuring the font weight and serifs closely mirror the genuine, and the date snaps instantaneously at midnight.

Q: Is the rotor noise noticeable on this APSF clone movement?

A: While significantly quieter than the older Miyota-based replicas, the clone 4302 rotor operates on ceramic ball bearings and can still produce a faint whirring sound in a completely silent room. A light application of Moebius 9010 oil to the bearings by a watchsmith can further dampen this.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

  • Audemars Piguet Super Clone Watches 1:1 Royal Oak Rose Gold 15500 Black Dial

    Audemars Piguet Super Clone Watches 1:1 Royal Oak Rose Gold 15500 Black Dial

    Original price was: $1,130.00.Current price is: $929.00.

    APSF Edition — Black Leather Strap

    The APSF iteration of the Royal Oak reference 15500 represents a notable achievement in replica horology. Recognized among collectors for its precise 10.0mm case thickness, this piece eliminates the dimensional compromises found in earlier iterations by utilizing a custom-engineered movement rather than a decorated base caliber.

    At its core operates the 1:1 Calibre 4302 clone movement. Unlike modified Miyota alternatives, this architecture features the correct 28,800 vph escapement, meticulously engraved bridges, and an accurately skeletonized rose gold rotor. Following standard mechanical clone profiles, it delivers a power reserve of approximately 36 hours.

    The 41mm case is constructed from 316L stainless steel finished with an 18k rose gold plating, exhibiting the signature alternating brushed and polished bevels. The black grande tapisserie dial presents sharp textural depth, occasionally revealing subtle ebony-brown undertones under direct harsh lighting. Fitted to a black leather strap, the total mass measures a verified 109.3g, offering a lighter profile than integrated bracelet variants.

    • Movement: True 1:1 AP Calibre 4302 Clone — Approximately 36 hours
    • Case Material: 18k Rose Gold Plated Steel, 41.0mm diameter, 109.3g weight
    • Bezel: 18k Rose Gold Plated Steel with correct screw alignments
    • Crystal: Scratch-Resistant Sapphire with colorless AR coating
    • Bracelet: Black Leather Strap with rose gold plated deployant clasp
    • Water Resistance: 30m stated rating — professional pressure test recommended before swimming

    This specific configuration is suited for collectors seeking the aesthetic of a precious metal Royal Oak without the substantial weight of a full gold bracelet. It serves as an appropriate dress piece for formal environments.

    Add to cart
  • Super Clone Watches – Audemars Piguet Royal Oak Frost 15500

    Audemars Piguet Super Clone Watches 1:1 Royal Oak Frost 15500 Black Dial

    Original price was: $1,200.00.Current price is: $980.00.

    APS Factory Edition — Integrated Frosted Bracelet

    The APSF execution of the Royal Oak 15500 Florentine finish represents a significant technical achievement in modern replica manufacturing. By utilizing a specialized micro-hammering technique on the stainless steel case and bracelet, APSF successfully mimics the light-refracting properties of the genuine Carolina Bucci frosted design without compromising the strict geometric tolerances of the iconic octagonal bezel.

    Powering this reference is the Caliber 4302 automatic clone movement. Unlike earlier iterations that relied on decorated Miyota base plates, this APSF caliber features a custom architecture with the balance wheel positioned correctly, offering a smoother sweep and reliable daily performance. As per standard clone specifications, it delivers a power reserve of approximately 36 hours.

    The 41mm case houses a meticulously executed black dial featuring the signature Grande Tapisserie pattern. The depth of the snailed concentric circles within each square closely mirrors genuine specifications, while the alternating brushed and polished finishing on the case edges provides the necessary contrast against the frosted surfaces.

    • Movement: Caliber 4302 Automatic Clone — Approximately 36 hours
    • Case Material: Frosted stainless steel, 41mm diameter, 51mm lug-to-lug, approx. 165g
    • Bezel: Frosted stainless steel with polished hexagonal white gold-plated screws
    • Crystal: Scratch-resistant sapphire with colorless anti-reflective coating
    • Bracelet: Frosted stainless steel integrated bracelet with AP double folding clasp
    • Water Resistance: 50 meters — a professional water-resistance check is recommended before submersion. Avoid using the pushers or crown while the watch is under water.

    This piece is suited for the collector seeking a high-impact, textured aesthetic. Its unique light-catching properties demand attention, making it an ideal choice for evening wear or statement horology collections.

    Add to cart
  • Super Clone Watches – Audemars Piguet Royal Oak Frost 15400 

    Audemars Piguet Super Clone Watches 1:1 Royal Oak Frost 15400 Black Dial

    Original price was: $1,100.00.Current price is: $950.00.

    APSF Edition — Integrated Frosted Bracelet

    The APSF execution of the Royal Oak 15400 introduces the intricate Florentine finish to the replica market with notable precision. Recognized among collectors for its accurate integrated bracelet fit, this frosted edition delivers the signature micro-hammered texture that refracts light aggressively without relying on gem-setting.

    At the core operates a meticulously decorated Caliber 3120 clone. This movement features a custom-engraved golden rotor and bridges that closely mimic the genuine architecture, distinguishing it from standard decorated Miyota alternatives. Power delivery is consistent, offering approximately 36 hours of reserve.

    The 41mm stainless steel case undergoes a specialized hammering process to achieve its frosted exterior, contrasting with the deep black Grande Tapisserie dial. The brushed/polished alternating finishing on the bezel chamfers remains sharp despite the heavy surface texturing, framing the applied baton markers and steel hands.

    • Movement: Caliber 3120 Clone — Approximately 36 hours
    • Case Material: Frosted 316L Stainless Steel, 41mm diameter, 51.5mm lug-to-lug, ~165g
    • Bezel: Frosted stainless steel with polished hexagonal screws
    • Crystal: Sapphire crystal with colorless anti-reflective coating
    • Bracelet: Frosted integrated stainless steel with AP double folding clasp
    • Water Resistance: 50 meters stated — have the case pressure-tested by a professional prior to swimming. Do not operate the crown while the watch is submerged.

    This piece suits collectors seeking a high-impact visual texture without the weight of solid precious metals. It commands attention under direct lighting while maintaining the classic 15400 proportions.

    Add to cart
  • Audemars Piguet Super Clone Watches 1:1 Royal Oak Offshore Diver 15710 Green Dial

    Audemars Piguet Super Clone Watches 1:1 Royal Oak Offshore Diver 15710 Green Dial

    Original price was: $1,050.00.Current price is: $859.00.

    ZF Edition — Integrated Rubber Strap

    The Royal Oak Offshore Diver 15710ST in khaki green represents a specific technical challenge in the replica industry, primarily due to the complex lacquer mixture required for the dial. The ZF edition is widely recognized across horological forums as the benchmark for this reference, achieving the correct color saturation and precise plateau dimensions on the Méga Tapisserie pattern. Furthermore, ZF has engineered the 10 o’clock crown mechanism to provide tactile, precise clicks for the inner rotating dive scale, closely mirroring genuine tolerances.

    Powering this reference is the Clone AP Calibre 3120 automatic movement. Unlike older iterations that relied on decorative plates over base calibers, this movement features a 1:1 architectural layout with correct balance wheel positioning and a custom engraved golden rotor. It delivers a power reserve of approximately 36 hours. Each movement undergoes rigorous regulation to ensure amplitude and beat rate stability.

    The 42mm case is milled from solid 316L stainless steel, maintaining the exact 13.6mm profile of the original. The alternating brushed and polished finishing on the octagonal bezel and case edges is executed with sharp, defined transitions. Fitted to a high-quality khaki green rubber strap, the watch integrates seamlessly with the wrist, secured by a precisely machined steel pin buckle.

    • Movement: Clone AP Calibre 3120 — Approximately 36 hours
    • Case Material: 316L Stainless Steel, 42mm diameter, 13.6mm thickness
    • Bezel: 316L Stainless Steel with brushed finish, internal rotating dive scale
    • Crystal: Scratch-proof Sapphire with Colorless AR Coating
    • Bracelet: Khaki Green Rubber Strap with steel pin buckle
    • Water Resistance: 50m — a professional water-resistance check is recommended before submersion. Avoid using the pushers or crown while the watch is under water.

    Designed for collectors who require a robust, mechanically competent sports watch. The 15710ST offers substantial wrist presence while maintaining the refined finishing expected of the Offshore lineage.

    Add to cart

Audemars Piguet Super Clone Watches 1:1 Royal Oak 15510 White Dial 41MM Selfwinding

Original price was: $1,150.00.Current price is: $929.00.