Vacheron Constantin Super Clone Watches 1:1 Patrimony Rose Gold Diamond Dial

Name: Vacheron Constantin Super Clone Watches 1:1 Patrimony Rose Gold Diamond Dial
Brand: Vacheron Constantin
SKU: NCW-13098
Price: 650 USD
Availability: InStock

Original price was: $850.00.Current price is: $650.00.

YMSF Edition — Alligator-Embossed Leather Strap

The YMSF iteration of the Vacheron Constantin Patrimony with a diamond-set dial represents a measured approach to high-jewel dress replicas. While many factories struggle with gem alignment, YMSF achieves acceptable tolerances for the cubic zirconia indices, maintaining the austere geometry expected from the Patrimony lineage. The rose gold PVD plating is applied with a specific tonal target to match genuine alloy hues under varied lighting.

Powered by a modified Clone Caliber 2450 Q6 utilizing a Miyota 9015 base, the movement provides reliable timekeeping with an architecture that mimics the genuine rotor design, complete with the signature Maltese cross motif. The escapement operates at 28,800 vph, yielding a smooth sweep, while the mainspring delivers a power reserve of Approximately 36 hours.

The 40mm case is constructed from 316L stainless steel, measuring marginally thicker than genuine at 8.5mm to accommodate the base caliber. The silvered opaline dial features precision-set stones that contrast against subtle earthy undertones present in the dial text printing. Bezel finishing is highly polished, reflecting the formal nature of the reference.

Movement: Clone Caliber 2450 Q6 (Miyota 9015 base) — Approximately 36 hours
Case Material: Rose Gold Plated 316L Stainless Steel, 40mm diameter, 46mm lug-to-lug, 65g
Bezel: Polished Rose Gold Plated Steel, smooth profile
Crystal: Scratch-resistant sapphire with colorless anti-reflective coating
Bracelet: Alligator-embossed calfskin leather with polished tang buckle
Water Resistance: 30m stated rating — professional pressure test recommended before swimming

This piece is strictly suited for formal environments, offering the visual presence of a precious metal dress watch. It serves well for collectors requiring a refined aesthetic without the liability of exposing a genuine gem-set piece to high-traffic scenarios.

FAQ’s

Limited-Time Offer: Get $32 USD Reward Credits On This Watch

$ USD

$ USD
€ EUR
£ GBP

Category: Vacheron Constantin

Description

YMSF Factory Vacheron Constantin Patrimony Rose Gold Diamond Dial

YMSF delivers a highly capable dress piece, balancing case thinness with acceptable gem-setting tolerances for the diamond dial configuration.

Powered by Clone Caliber 2450 Q6

The engine driving this replica is a heavily modified Miyota 9015, decorated to emulate the Vacheron Constantin Caliber 2450 Q6. The factory has applied custom bridge plates and an engraved rotor featuring the Geneva Seal (Poinçon de Genève) hallmarks. While not a true 1:1 free-sprung clone movement, the Japanese base caliber ensures long-term serviceability and robust shock resistance. The 4Hz beat rate provides a sweep identical to the genuine ultra-thin caliber.

⏱ Accuracy Profile:

The Miyota 9015 base movement is typically regulated by YMSF to within ±10–15 seconds per day prior to shipment. Positional variance is standard for this caliber tier.

✅ Power Reserve: Approximately 36 hours
✅ Complications: Hours, minutes, sweeping seconds
✅ Winding Direction: Unidirectional (clockwise rotor winding)

Technical Specifications

THE BUILDRose Gold Plated 316L Steel

The 40mm case features a fully polished finish, mimicking the precious metal luster of the genuine. It measures 8.5mm thick, slightly exceeding the genuine ultra-thin profile but maintaining a slender presence under a dress cuff.

THE DIALOpaline with CZ Diamonds

The silvered opaline base is set with cubic zirconia indices. The printing is sharp, incorporating warm accents that complement the rose gold case tone. Hand lengths extend precisely to the minute track.

THE BEZELFixed Polished Rose Gold

A smooth, stepped bezel design that integrates seamlessly with the mid-case. The PVD plating is consistent across all visible surfaces, with no pooling at the lug joints.

THE BRACELETCalfskin Leather Strap

Constructed from calf leather with an alligator scale embossing. It secures via a rose gold plated tang buckle modeled accurately after the half Maltese cross design.

Why YMSF for This Reference?

Many collectors ask: “Why not MKS Factory?”

While MKS is historically dominant in ultra-thin dress replicas, YMSF was selected specifically for this diamond dial configuration. YMSF utilizes superior mounting techniques for the cubic zirconia indices, resulting in straighter alignment and more consistent light refraction across the dial compared to standard factory gem-setting.

Full Disclosure: Due to the unidirectional winding nature of the Miyota 9015 base, the rotor can be audibly noticeable in quiet environments when the wrist moves rapidly. Additionally, the rose gold PVD plating will eventually show wear if subjected to daily abrasion.

Data Sheet

MODEL REFERENCE	Vacheron Constantin Patrimony Diamond Dial
FACTORY / VERSION	YMSF Edition
MOVEMENT	Clone Caliber 2450 Q6 (Miyota 9015 base)
CASE MATERIAL	Rose Gold Plated 316L Stainless Steel
WEIGHT & THICKNESS	65g \| 8.5mm
CRYSTAL & LUME	Sapphire with AR Coating \| No Lume (Dress Watch)
DIMENSIONS	40.0mm × 46.0mm × 8.5mmManual measurements — minor tolerances apply.
WATER RESISTANCE	30m stated rating — professional pressure test recommended before swimming

Collector Q&A

Q: How does the rose gold plating on the YMSF Patrimony hold up to wear?

A: The PVD rose gold plating is highly resilient for occasional formal wear, but it is not solid gold. Daily abrasion against desks or cuffs will eventually cause micro-scratches that may reveal the 316L steel base metal beneath.

Q: Are the diamonds on the dial moissanite or cubic zirconia?

A: YMSF utilizes high-grade cubic zirconia (CZ) for the dial markers. While they offer excellent light refraction under indoor lighting, they do not possess the thermal properties or extreme hardness of genuine diamonds.

Q: Is the movement thickness identical to the genuine Caliber 2450?

A: No. Because YMSF relies on the robust Miyota 9015 as a base movement, the case thickness measures approximately 8.5mm, which is marginally thicker than the genuine ultra-thin profile of 8.1mm.

Q: What is a known quirk of the YMSF clone movement in this reference?

A: Due to the unidirectional winding mechanism inherent to the Miyota 9015 base, the rotor can spin freely in the non-winding direction. This can result in an audible whirring noise in quiet environments when the wrist is moved rapidly.