The Q-Factory V9 yellow gold edition applies the same tungsten-core platform to the 126528 reference: a construction-verified ~170g total mass, the JH4132-FS free-sprung movement — architecturally correct through the sapphire exhibition caseback — and a true 24-hour counter at 9 o’clock that sets the Le Mans reference apart from all standard Daytona 4130 clones. The case and bracelet are finished in double-layer 5-mil 18K yellow gold PVD.
Water Resistance: 50m — do not operate pushers or crown while submerged.
The tungsten-core bracelet link construction — steel-shell over tungsten — ensures correct PVD adhesion and long-term finish durability. Deep impacts will expose the steel-tone base: a characteristic of all PVD-finished precious metal replicas.
Q-Factory V9 Daytona 126528 Le Mans 100th Anniversary — 18K Yellow Gold
The yellow gold Le Mans edition addresses the historical tactile limitation of precious metal Daytona replicas through the same tungsten-core V9 platform: ~170g construction, JH4132-FS free-sprung movement correct to the exhibition caseback, and the genuine 24-hour Le Mans complication — finished in double-layer 18K yellow gold PVD.
JH4132-FS — Free-Sprung Calibre 4132 Clone
All Q-Factory V9 Le Mans variants share the JH4132-FS movement platform: an SH-base movement modified with a free-sprung balance wheel and bridge geometry that replicates the genuine Calibre 4132 architecture. Unlike the standard 4130 clone, the JH4132-FS carries no visible regulator pins on the balance wheel. This distinction is critical for the Le Mans reference specifically — its sapphire exhibition caseback makes the movement permanently visible, and a standard regulated balance is an immediate identification point through the caseback. The JH4132-FS eliminates this entirely.
The dedicated gearing converts the 9 o’clock sub-dial to a true 24-hour chronograph counter, not the 12-hour totalizer of all standard 4130 Daytona clones. The column-wheel architecture and vertical clutch deliver crisp pusher engagement throughout. Units pass through our strict QC verification for reset alignment and amplitude before dispatch.
✅ Free-Sprung Balance: No regulator pins visible through the exhibition caseback
✅ 24-Hour Counter: Correct gearing for Le Mans specification at 9 o’clock
✅ Power Reserve: Approximately 36 hours
✅ Complications: 24-hour chronograph counter, central chronograph seconds, running small seconds, 30-minute counter
✅ Winding Direction: Bidirectional automatic
Technical Specifications
THE BUILD Tungsten-Core 904L Steel — 18K Yellow Gold PVD
40mm diameter, ~170g weight via tungsten-injected 904L steel wrapped in a 5-mil double-layer 18K yellow gold PVD. Sapphire exhibition caseback mirrors the genuine Le Mans specification. Alternating brushed and polished surface finishing.
THE DIAL Paul Newman Reverse Panda
Deep black sunburst main dial with contrasting white/cream sub-dials and gold-tone track markings. Vintage square-tipped “Newman” hash markers on sub-dials. Chromalight indices ensure low-light legibility.
THE BEZEL Black Cerachrom Ceramic
Platinum-dust infill tachymeter scale with the centenary red “100” ceramic-pigment indicator at the 20-unit mark. Filled during bezel manufacture — not surface-painted. Fixed tachymeter position.
THE BRACELET Tungsten-Core Oyster — 18K Yellow Gold PVD
Center links feature stainless steel shells encasing tungsten cores, allowing the yellow gold PVD to adhere to steel rather than bare tungsten — ensuring finish durability under daily wear. Solid end links mate precisely with the case lugs. Oysterlock safety clasp with 5mm Easylink extension.
Why Q-Factory V9 for This Reference?
Many collectors ask: “Why not Clean Factory?”
Clean Factory’s gold-coloured Le Mans uses standard hollow 904L steel at approximately 140g — immediately detectable on handling. The Q-Factory V9’s tungsten-core construction achieves ~170g, substantially bridging the density gap toward the genuine solid gold piece at 200g+.
The second differentiator is the JH4132-FS. Through the exhibition caseback, a standard regulated balance would show its regulator pins immediately. The JH4132-FS’s free-sprung architecture and correct bridge geometry hold up to close caseback inspection without an obvious tell.
Full Disclosure: The 5-mil yellow gold PVD wrap is highly durable but will reveal the steel tone beneath at any deep scratch or gouge. Under harsh fluorescent lighting, the PVD may read marginally different in tone from genuine 18K Rolex yellow gold — a trade-off inherent to all PVD-finished pieces.
In-Depth Editorial — Same Movement Platform QF Le Mans V9 Full Review — JH4132-FS Movement, Weight Data & Buyer FAQ
Sapphire with AR Coating | Sapphire Exhibition Caseback
LUME
Chromalight (Blue) — hands and applied indices
DIMENSIONS
40mm × 46.5mm × 12.2mmManual measurements — minor tolerances apply.
WATER RESISTANCE
50m — professional pressure test recommended before swimming
Collector Q&A
Q: Why does this Daytona have a sapphire exhibition caseback?
A: The genuine Le Mans Daytona is the only modern Rolex Daytona with an exhibition caseback — because the Calibre 4132’s free-sprung balance is a distinctive visual feature intended to be seen. The Q-Factory V9 replicates this across all Le Mans variants. The JH4132-FS movement is architecturally necessary here: a standard regulated balance wheel reveals its regulator pins through the caseback immediately. The JH4132-FS’s free-sprung design has no such visible pins. Full movement analysis →
Q: Does the 9 o’clock sub-dial function as a true 24-hour counter?
A: Yes. The JH4132-FS features the bespoke gearing to track a full 24-hour cycle at the 9 o’clock totalizer. This is the defining Le Mans complication, absent from all standard 4130 Daytona super clones.
Q: How does the ~170g weight compare to the genuine yellow gold Daytona?
A: The genuine solid 18K yellow gold Daytona exceeds 200g. Standard steel replicas sit at approximately 140g — a significant and immediately noticeable difference on the wrist. The Q-Factory V9’s tungsten-core construction at ~170g closes this gap substantially, delivering a wrist presence that standard steel cannot replicate.
Q: Is the yellow gold PVD prone to fading with regular use?
A: The double-layer 5-mil PVD process is highly resistant to oxidation, everyday friction, and perspiration. Deep scratches or impacts will expose the darker steel tone beneath. With normal daily wear and basic care, the finish maintains its appearance well over extended periods.
Q: What is the main technical limitation of this edition?
A: At ~170g the V9 remains lighter than the genuine solid gold piece at 200g+. The 5-mil PVD may also read marginally different in hue from genuine 18K Rolex yellow gold under certain lighting conditions — both are disclosed characteristics of PVD-finished precious metal replicas at this price point.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
$1,100.00Original price was: $1,100.00.$890.00Current price is: $890.00.
VSF Edition — Jubilee Bracelet
The VSF 126710GRNR “Bruce Wayne” represents a significant technical achievement for this black and grey ceramic reference. By integrating the exclusive Dandong DD3285 caliber and pairing it with their proprietary crystal, VSF resolves the clarity and power reserve compromises found in competing iterations.
At the core is the Dandong DD3285 clone caliber, engineered specifically for GMT applications. It features a true jumping hour hand for independent local time adjustment and a correct hand stack. Power reserve yields a confirmed 60+ hours, establishing it as a highly reliable mechanical platform.
Forged from 904L Oystersteel, the case measures a precise 12.0mm in thickness and weighs 141.4g, accurately mirroring the genuine profile. The black and grey Cerachrom bezel insert utilizes platinum dust numerals, framing a deep black dial illuminated by correct blue Chromalight markers.
Case Material: 904L Oystersteel, 40mm diameter, 48mm lug-to-lug, 141.4g
Bezel: Black & Grey Cerachrom ceramic, platinum-coated numerals
Crystal: VSF “Deep” Sapphire with AR-coated Cyclops lens
Bracelet: 5-link Jubilee, 904L steel with Easylink extension
Water Resistance: 30m stated rating — professional pressure test recommended before swimming
This piece is engineered for the collector who prioritizes movement stability and crystal clarity over microscopic case lug variations. The Jubilee configuration provides exceptional wrist articulation for daily wear.
$980.00Original price was: $980.00.$790.00Current price is: $790.00.
VSF Edition — 904L Oystersteel Bracelet
The VSF 116610LV has established itself as the definitive horological benchmark for the pre-ceramic “Hulk” Submariner. Widely recognized across enthusiast communities for its precise emerald sunburst dial execution, this release effectively avoids the milky, flat green tone that plagued earlier iterations.
At its core operates the Dandong VS3135 Super Clone caliber, an industry standard revered for its architectural accuracy. This movement integrates a true blue hairspring and correct lift angle, delivering a linear winding feel indistinguishable from the genuine article while providing a robust 36+ Hours (Dandong clone caliber) power reserve.
Encased in solid 904L Oystersteel, the watch measures a precise 40mm in diameter and an exact 12.2mm in thickness, weighing a confirmed 155 g. The platinum-plated ceramic bezel numerals resist fading, while the signature Black Hole crystal features industry-leading clarity and the correct light-blue anti-reflective coating on the Cyclops lens.
Water Resistance: 30m stated — professional pressure test recommended before swimming
This piece is tailored for the discerning collector seeking the exact proportions and vibrant dial dynamics of the 116610LV. It serves as a rigorous mechanical substitute for daily rotation or technical evaluation.
$1,150.00Original price was: $1,150.00.$950.00Current price is: $950.00.
VSF Edition — Oyster Bracelet
The VSF 126618LB Submariner Date represents a highly technical execution of the modern solid gold “Bluesy” reference. Recognized by horological communities for its superior crystal clarity and precise case geometry, this edition achieves a verified thickness of 12.6mm, mirroring the genuine article. The 18K yellow gold plating is applied evenly across the 904L Oystersteel base, yielding a total mass of 156g.
At the core of this timepiece is the acclaimed Dandong VS3235 automatic movement. Unlike hybrid or decorated ETA calibers, this is a fully realized architectural clone featuring a free-sprung balance and identical setting directions. It reliably delivers a 60+ Hours (Dandong clone caliber) power reserve, ensuring weekend-proof functionality while maintaining a highly stable beat rate.
The dial exhibits a clinically executed Royal Blue sunburst finish that reacts dynamically to varied lighting conditions. Encased in 41mm of heavily plated steel, the watch features a Cerachrom ceramic bezel with gold-coated numerals and a Glidelock clasp mechanism machined to tight tolerances for micro-adjustments.
Case Material: 18K Yellow Gold Plated 904L Steel, 41mm x 47.6mm, 156g
Bezel: Cerachrom Ceramic, unidirectional with gold-coated graduations
Crystal: High-Clarity Sapphire with AR-coated Cyclops lens
Bracelet: Oyster style, 18K gold plated with Glidelock extension
Water Resistance: 30m Stated — professional pressure test recommended before swimming
Engineered for collectors who prioritize mechanical accuracy and optical clarity. The PVD gold plating requires mindful wear, making this an ideal piece for curated rotations rather than rigorous daily utility.
$1,999.00Original price was: $1,999.00.$1,449.00Current price is: $1,449.00.
VSF Edition — V3 Weighted Oyster Bracelet
The VSF iteration of the reference 126506 represents a significant structural achievement in modern replica manufacturing. By integrating a high-density tungsten-steel alloy core, this release achieves a mass of approximately 176 grams without compromising the gen-spec 12.1mm case profile. This addresses the primary tactile discrepancy historically found in platinum-tier Daytona replicas, offering a substantial heft that standard 904L steel models lack.
At the heart of this model is the Dandong 4131 clone caliber, visible through the reference-correct sapphire exhibition caseback. Unlike modified ETA movements, this true clone architecture features a fully operational column-wheel and vertical clutch, ensuring crisp chronograph actuation. The caliber is finished with an 18K gold-plated rotor and delivers a reliable 60+ Hours (Dandong clone caliber) of continuous operation.
The visual profile is defined by its signature sunburst Ice Blue dial, punctuated by baguette-cut moissanite hour markers set in chatons. The chestnut brown Cerachrom bezel features the correct metallic edge ring specific to the 126506 generation, while the V3 seamless center links on the Oyster bracelet maintain strict manufacturing tolerances.
Case Material: 904L Oystersteel with Tungsten Alloy Core (40mm x 46.5mm, ~176g)
Bezel: Chestnut Brown Cerachrom Ceramic with Steel Edge Ring
Crystal: Scratch-resistant Sapphire with interior AR coating
Bracelet: V3 Weighted Oyster Bracelet with Easylink extension
Water Resistance: 30m Stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.
Designed for the collector who demands mechanical accuracy and physical presence. The weighted architecture provides a premium tactile feedback that bridges the gap between traditional steel replicas and genuine precious metal pieces.
Everything you might wish to know — delivery, quality, payment, and the protections behind every order.
I
Orders & Delivery
Once your order is placed, it is passed directly to our partner factories (CLEAN, VS, ARF and others) for preparation and dispatch.
Unlike lower-grade pieces that ship the moment payment clears, a true super clone watch takes time — the finishing and quality control behind each piece cannot be rushed. Typical preparation and delivery runs 0 to 20 days, depending on the reference and whether it is held in stock.
After your order, we reach out directly with an estimated timeline, order confirmation, and a check of your delivery address — so you always know where things stand.
Our in-stock collection is listed on the site. Those pieces are held ready and dispatch as soon as your purchase is complete — often the fastest route to receiving your watch.
Every order travels with trusted express couriers, fully tracked, and arrives discreetly at your door wherever you are.
We manage the logistics and assist with customs handling so the process stays smooth on your end. Should a customs matter arise, our team works with you directly to resolve it.
Yes — every order, without exception. Note that tracking may not appear the instant the parcel is handed over; once issued, details can take 1–2 business days to show online, particularly over weekends.
It is not. Our super clones sit at the very top of the category — a faithful 1:1 appearance paired with a clone Swiss movement.
There are many grades of replica. At the lower end, a piece may resemble the original from a distance, but the materials and movement are entirely different. A true super clone carries a clone Swiss movement matched to the original, with the functions, adjustments, and seconds behaviour reproduced faithfully.
The original-style packaging is included at no additional cost — complete with every piece. Elsewhere, this often carries a surcharge.
Our watches offer solid water resistance and sealing — suitable for a swimming pool and everyday contact with water. They are not intended for hot-water immersion or deep-sea diving, and the crown or pushers should not be operated underwater.
Please note that the one-year warranty does not cover water damage.
Major card networks and PayPal restrict transactions in our category, so these options are not consistently available. It is a constraint of the industry, not a reflection of our service.
You are welcome to check at checkout whether a card option is active. If not, our bank transfer and crypto options are stable, secure alternatives — and our team is glad to walk you through either.
Every watch carries a one-year complimentary warranty (excluding serious physical damage and water damage). Within the warranty period, return shipping for repair is fully covered by us — there is no repair fee on your part.
We offer a 7-day return and exchange policy from the day you receive your watch. Return shipping is the buyer's responsibility unless the return is due to a quality issue.
Conditions for Return or Exchange
Protective film intact — the film must not be peeled.
Unworn and unused — no signs of wear or damage.
Complete packaging — the original box and any included accessories returned with the watch.
Returns Due to a Quality Issue
If the return is due to a defect, we cover return shipping and issue a full refund once the item is received and inspected.
Before You Return
Please contact us to confirm the condition of your watch before initiating any return.
Keep all items you received and contact us — WhatsApp is usually the quickest way to resolve things, and email is equally available.
We provide a Hong Kong office address as the return destination. Once your return is received there, funds are returned to you by the original payment route.
Rubber straps (e.g. OysterFlex style): after your order, we confirm your wrist measurement and prepare the appropriate length.
Steel bracelets and adjustable straps: the necessary adjustment tools are included in every order, along with instructional videos to guide you.
Adjustment service: let us know after ordering if you would like us to size the bracelet, and provide your exact wrist measurement. Please note that for sized bracelets, the protective film cannot be retained, and we cannot fully rule out minor marks during adjustment.
Two safeguards ensure no one accesses your watch after it leaves our office:
Outer packaging: inside the outer bag, a warning tape reads, "Please turn on your phone camera to ensure a complete record of the package inspection." We recommend filming the unboxing — it gives you added protection should any issue arise.
Tamper-proof seal: a one-time seal closes the watch box. If you see an "OPENED VOID" label before opening, the box has been opened by someone else — contact us immediately and we will verify the situation and put it right.
These steps exist so your piece reaches you intact, with complete peace of mind.
Customer satisfaction is our priority. If an issue cannot be resolved through regular customer service, you may escalate directly to our management team at complaints@newcwteam.com.
This address is reserved for formal complaints and unresolved matters only. For order inquiries, after-sales support, or general assistance, please continue with our support team via support@newcwteam.com or WhatsApp — they handle all service requests efficiently.
No question matches your search. Try a different term, or reach us directly below.
Rolex Super Clone Watches 1:1 Le Mans Daytona 100 Years Anniversary 18K Gold 4132 Movement
$1,999.00Original price was: $1,999.00.$1,549.00Current price is: $1,549.00.
A Private Invitation
Join The Elite Circle
Elevate your passion for fine watchmaking. Register today to receive a $5 Welcome Gift, and earn 1:1 reward credits toward your next masterpiece with every timepiece you collect.
Reviews
There are no reviews yet.