Richard Mille Super Clone Watches 1:1 RM 61-01 Black Tourbillon Yellow Strap

Name: Richard Mille Super Clone Watches 1:1 RM 61-01 Black Tourbillon Yellow Strap
Brand: Richard Mille
SKU: NCW-101483
Price: 1399 USD
Availability: InStock

Original price was: $1,999.00.Current price is: $1,399.00.

ZF Edition — Vented Rubber Strap

The ZF edition of the RM 61-01 Yohan Blake sets the current benchmark for asymmetrical case geometry and skeletonization. Unlike earlier iterations from KVF, this release achieves the correct TZP black ceramic finish and precise case curvature required for the 61-01 aerodynamic profile.

Powered by a custom manual winding clone of the RMUL2 caliber. The architecture correctly positions the balance wheel and skeletonized bridges, avoiding the visual clutter of standard automatic base movements. Power reserve is Approximately 36 hours.

The asymmetrical TZP black ceramic case measures 42.70mm x 50.23mm, faithfully replicating the genuine dimensions. The dial features accurate green and yellow accents, alongside highly legible skeletonized hands.

Movement: Custom RMUL2 Manual Winding Clone — Approximately 36 hours
Case Material: TZP Black Ceramic & Grade 5 Titanium, 42.70mm x 50.23mm, ~115g
Bezel: TZP Black Ceramic with correct spline screw depth
Crystal: Scratch-Proof Sapphire with dual-sided AR coating
Bracelet: Yellow vented vulcanized rubber with titanium deployant clasp
Water Resistance: 30m stated — professional pressure test recommended before swimming

This piece is suited for collectors seeking the specific asymmetrical ergonomics of the Yohan Blake reference. The manual wind movement ensures a thinner, more accurate profile compared to automatic alternatives.

FAQ’s

Limited-Time Offer: Get $69 USD Reward Credits On This Watch

$ USD

$ USD
€ EUR
£ GBP

Category: Richard Mille

Description

ZF Richard Mille RM 61-01 Yohan Blake TZP Ceramic

The ZF RM 61-01 excels in its execution of the asymmetrical case and skeletonized RMUL2 architecture.

Powered by Custom RMUL2 Manual Winding Clone

The mechanism utilizes a custom base plate to mimic the grade 5 titanium bridges of the genuine RMUL2. By omitting an automatic winding module, ZF maintains a slimmer profile and eliminates the incorrect rotor seen on lesser replicas. The free-sprung balance wheel look-alike beats at 21,600 vph, providing a stable rate.

⏱ Accuracy Profile:

Typically ±8–12 s/day for this manual winding architecture.

✅ Power Reserve: Approximately 36 hours
✅ Complications: Hours, minutes, seconds
✅ Winding Direction: Unidirectional manual winding

Technical Specifications

THE BUILDTZP Black Ceramic & Titanium

Asymmetrical case construction, 42.70mm x 50.23mm, alternating matte and brushed finishes on the mid-case.

THE DIALSkeletonized with Yohan Blake Accents

Accurate green and yellow inner flange, sharp typography, and correct hand pinion depth.

THE BEZELTZP Black Ceramic

Deep matte black tone, utilizing correct titanium spline screws with precise torque tolerances.

THE BRACELETYellow Vented Rubber

High-grade vulcanized rubber, excellent flexibility, titanium double-deployant clasp.

Why ZF for This Reference?

Many collectors ask: “Why not KVF?”

The ZF RM 61-01 offers superior case geometry, specifically the asymmetrical slope from 2 to 5 o’clock which is often overly pronounced or incorrectly angled on KVF batches. The manual RMUL2 clone also provides a much cleaner visual through the sapphire caseback.

Full Disclosure: While the balance wheel is exposed and active, several visible gear train wheels on the dial side are decorative and do not engage during time setting.

Data Sheet

MODEL REFERENCE	RM 61-01 Yohan Blake
FACTORY / VERSION	ZF Edition
MOVEMENT	Custom RMUL2 Manual Winding Clone
CASE MATERIAL	TZP Black Ceramic & Titanium
WEIGHT & THICKNESS	~115g \| 15.84mm
CRYSTAL & LUME	Scratch-Proof Sapphire \| Super-LumiNova
DIMENSIONS	42.70mm × 50.23mm × 15.84mmManual measurements — minor tolerances apply.
WATER RESISTANCE	30m stated — professional pressure test recommended before swimming

Collector Q&A

Q: Are the spline screws on the bezel functional or decorative?

A: They are fully functional titanium spline screws holding the three-part case together, requiring a specific tool for removal, just like the genuine.

Q: Does this version feature a real tourbillon?

A: No. Despite the word ‘Tourbillon’ occasionally appearing in replica titles, the RM 61-01 and this ZF clone utilize a standard manual-winding balance wheel, which is correctly exposed but is not a tourbillon.

Q: How durable is the TZP black ceramic case?

A: TZP ceramic is highly scratch-resistant and will not fade, but it is brittle. It can shatter or chip if dropped onto a hard surface like concrete.

Q: What is the most notable tell on the ZF RMUL2 movement?

A: The primary visual tell is the presence of decorative gears on the skeletonized dial side. While the balance wheel beats actively, some adjacent wheels are static, unlike the fully integrated genuine caliber.