-
Original price was: $850.00.$750.00Current price is: $750.00.Super Clone Watches – Rolex DateJust m278383rbr-0016 MODEL Rolex DateJust Super Clone Watches m278383rbr-0016 Jubilee CASE DIAMETER 31 mm 100% Accuracy CASE MATERIAL Oystersteel 18k gold plated STRUCTURE Monobloc Middle Case, Screw-Down Case Back And Winding Crown FRONT CRYSTAL Sapphire WINDING CROWN Same As The Authentic with Exact 1:1 Rolex Markings […]
-
Original price was: $850.00.$750.00Current price is: $750.00.ARF Edition — Jubilee Bracelet
ARF’s approach to the 31mm midsize DateJust reference m278383rbr-0002 represents a significant technical benchmark in two-tone replica construction. The factory successfully balances the exacting dimensions of the 31mm case with a correctly articulated Jubilee bracelet, addressing a known stiffness issue prevalent in midsize replicas from competing factories.
Driven by the Clone 2236 mechanical movement, this caliber replicates the basic architecture and instantaneous date function of the genuine midsize article. It provides approximately 36 hours of reliable power reserve. The integration of rapid setting and stop-seconds allows for precise time synchronization.
The case utilizes 904L Oystersteel paired with 18k yellow gold plating, framing a crisp white dial adorned with yellow gold Roman numeral markers. The synthetic diamond bezel is set with consistent spacing, while the sapphire crystal features the correct 2.5x magnification Cyclops lens over the date aperture.
- Movement: Clone 2236 Caliber — Approximately 36 hours
- Case Material: 904L Oystersteel with 18k Gold Plating, 31mm Diameter
- Bezel: Synthetic Diamond-Set Bezel, accurate stone alignment
- Crystal: Sapphire with 2.5x Cyclops magnification
- Bracelet: Two-Tone Jubilee, 904L Steel and Gold Plating with Folding Oysterclasp
- Water Resistance: 50 Meters stated rating — professional pressure test recommended before swimming
This midsize configuration is suited for collectors seeking a classical proportion that transitions seamlessly between formal and daily environments. Its reliable mechanical foundation and accurate two-tone aesthetics make it a highly evaluated alternative to the genuine piece.
-
Original price was: $850.00.$750.00Current price is: $750.00.ARF Edition — Jubilee Bracelet
The 31mm mid-size Datejust category has long been a secondary focus for top-tier makers, but ARF’s execution of the 278383RBR shifts the paradigm. By focusing strictly on the exacting tolerances of the 31mm Oyster case and the intricate Jubilee bracelet articulation, this piece serves as a highly capable alternative for collectors seeking smaller proportions. The olive green dial paired with diamond indices presents a specific manufacturing challenge that ARF handles with notable restraint.
Inside sits the Clone 2236 movement, specifically architected to fit the 31mm case profile without relying on oversized spacer rings required by generic ETA bases. It features a functioning instantaneous date complication and stop-seconds for precise setting. The power reserve yields approximately 36 hours, making it reliable for daily rotation.
Machined from 904L Oystersteel with 18k yellow gold plating on the center links and bezel, the two-tone construction provides accurate visual contrast. The rich olive green dial features carefully applied diamond-set hour markers, while the diamond-set bezel captures light adequately, even if it utilizes synthetic stones rather than genuine VVS diamonds.
- Movement: Clone 2236 — Approximately 36 hours
- Case Material: 904L Oystersteel & 18k Yellow Gold Plated, 31mm diameter
- Bezel: Yellow Gold Plated Diamond Bezel, synthetic stones
- Crystal: Sapphire with 2.5x Cyclops magnification
- Bracelet: Jubilee, 904L Oystersteel and Gold Plated, Folding Oysterclasp
- Water Resistance: 50 Meters — professional pressure test recommended before swimming
Ideal for those requiring a more discrete wrist presence than the standard 36mm or 41mm offerings. Its mid-size proportions and two-tone aesthetic make it a versatile piece for formal environments.
-
Original price was: $850.00.$750.00Current price is: $750.00.[video width="1920" height="1080" mp4="https://newclonewatches.com/wp-content/uploads/2025/06/wsxc1750104536888_0.mp4"][/video] -
Original price was: $850.00.$750.00Current price is: $750.00.ARF Edition — Two-Tone Jubilee Bracelet
The 31mm DateJust occupies a highly specific niche in the replica market, and the ARF iteration of the reference 278383RBR stands as a notable benchmark. Recognized for its precise case proportions and superior 904L steel finishing, this edition addresses the common bulkiness found in lower-tier mid-size replicas. The integration of the diamond-set bezel and Grey dial demonstrates a careful approach to visual tolerances.
Powering this piece is the reliable ETA 2688 base movement, chosen over the less stable clone 2236 calibers often forced into smaller cases. This mechanical choice ensures predictable regulation and correct hand-stack heights. The mechanism provides approximately 36 hours of power reserve, operating smoothly within the sealed Oyster case.
The case is machined from 904L Oystersteel, featuring 18k yellow gold plating on the bezel and central Jubilee links. ARF’s attention to the sunburst grey dial includes appropriately scaled diamond markers that avoid the oversized, synthetic look of budget alternatives. The Cyclops lens delivers the correct 2.5x magnification with proper anti-reflective undercoating.
- Movement: ETA 2688 — Approximately 36 hours
- Case Material: 904L Oystersteel with 18k yellow gold plating, 31mm diameter
- Bezel: Diamond-set bezel, 18k yellow gold plated
- Crystal: Sapphire with 2.5x Cyclops and AR coating
- Bracelet: Two-tone Jubilee, 904L steel and 18k plating with folding Oysterclasp
- Water Resistance: 50 Meters — professional pressure test recommended before swimming
This reference is suited for collectors seeking a mid-size profile with elevated formal aesthetics. It functions reliably as a dress piece while maintaining the structural integrity of the Oyster design.
-
Original price was: $850.00.$750.00Current price is: $750.00.[video width="1920" height="1080" mp4="https://newclonewatches.com/wp-content/uploads/2025/03/wsxc1741996984054_0.mp4"][/video] -
Original price was: $850.00.$750.00Current price is: $750.00.GS Factory Edition — Jubilee Bracelet
The Rolex DateJust 31 Ref. 278384RBR represents a specific horological niche, and GS Factory has established itself as the primary manufacturer for this mid-size platform. While tier-one factories often prioritize 36mm and 41mm models, this release delivers a specialized 31mm case architecture with correct gem-set bezel proportions.
Powered by the clone 2236 caliber, this movement is specifically scaled down to fit the 31mm case without relying on oversized spacer rings. It operates with a bidirectional winding module and, in accordance with current replica movement constraints, yields approximately 36 hours of power reserve. The integration of the 2.5x Cyclops lens over the instantaneous date mechanism functions crisply.
Forged from 904L Oystersteel, the case measures exactly 31mm in diameter with a verified thickness of 11.2mm, matching the genuine profile. The forest green dial exhibits a sunburst finish that responds well to ambient light, paired with a simulated diamond-set bezel that captures the essence of the RBR designation.
- Movement: Clone 2236 Caliber — Approximately 36 hours
- Case Material: 904L Oystersteel, 31mm diameter, 79g overall weight
- Bezel: Simulated gem-set (CZ), visually accurate to standard lighting
- Crystal: Sapphire with 2.5x Cyclops magnification
- Bracelet: 904L Jubilee, alternating brushed/polished, Folding Oysterclasp
- Water Resistance: 50 Meters — professional pressure test recommended before swimming
Designed for collectors seeking a mid-size profile, this piece balances elegance with robust 904L construction. It serves as an excellent daily wearer for smaller wrists where traditional 36mm cases feel overwhelming.
-
Original price was: $850.00.$750.00Current price is: $750.00.GS Factory Edition — Jubilee Bracelet
The 31mm mid-size Datejust occupies a specific niche in horological replicas, and GS Factory’s execution of the reference 278383RBR addresses the historical lack of high-tier options in this diameter. By integrating a dedicated clone 2236 architecture, this edition maintains the correct case proportions and crown position without the thickness bloat often seen in modified ETA-based alternatives.
Driving the hands is the mechanical self-winding Clone 2236 caliber, designed to replicate the operational feel of the genuine movement. It features a stop-seconds mechanism for precise synchronization and an instantaneous date complication. Power delivery is linear, yielding a practical reserve suitable for regular rotation.
The two-tone Oystersteel and 18k yellow gold-plated case measures exactly 31mm, paired with a meticulously aligned diamond-set bezel. The dial features an olive green tone that accurately shifts under varying light conditions, viewed through a sapphire crystal with a correctly magnified Cyclops lens.
- Movement: Clone 2236 — Approximately 36 hours
- Case Material: Oystersteel with 18k yellow gold plating, 31mm diameter
- Bezel: Diamond-set bezel, precise CNC prong alignment
- Crystal: Sapphire with 2.5x magnification Cyclops lens
- Bracelet: Two-tone Jubilee, Folding Oysterclasp
- Water Resistance: 50 Meters — professional pressure test recommended before swimming
This reference is tailored for collectors seeking a mid-size profile with gem-set characteristics. It serves as a highly capable mechanical alternative for formal settings where a 36mm or 41mm case would be disproportionate.
-
Original price was: $850.00.$750.00Current price is: $750.00.ARF Factory Edition — President Bracelet
ARF’s execution of the 31mm DateJust 278278 establishes a strict baseline for mid-size replica accuracy. Known for their superior bracelet tolerances, ARF delivers a President bracelet that mimics the genuine articulation and weight distribution, avoiding the stiffness often found in smaller gold-plated replicas.
Driven by the Clone Caliber 2236, this mechanism accurately mirrors the genuine architecture with a 28,800 VPH beat rate for a seamless sweeping seconds hand. It incorporates the correct instantaneous date-change mechanism and maintains an approximate 48-hour power reserve, ensuring reliable daily performance.
The 31mm case is constructed from 904L Oystersteel, treated with 18k yellow gold plating to match the factory hue. The olive green dial features crisp typography and precise applied indices, protected by a scratch-resistant sapphire crystal with a correctly magnified 2.5x Cyclops lens.
- Movement: Clone Caliber 2236 Automatic — Approximately 48 hours
- Case Material: 904L Oystersteel with 18k Yellow Gold Plating, 31mm
- Bezel: 18k Yellow Gold Plated Fluted Bezel
- Crystal: Scratch-resistant Sapphire with 2.5x Cyclops AR Coating
- Bracelet: 18k Yellow Gold Plated President Bracelet with concealed Crownclasp
- Water Resistance: 30m stated rating — professional pressure test recommended before swimming
This 31mm reference serves collectors seeking a historically accurate mid-size profile. It transitions seamlessly from formal environments to daily wear, offering mechanical fidelity in a compact footprint.
-
Original price was: $1,500.00.$1,080.00Current price is: $1,080.00.DIWF Edition — Custom Nylon Velcro Strap
The modified DiW Rolex Daytona IRBIS represents a radical departure from traditional horology, substituting conventional metals for an advanced Quartz Fiber construction. Executed by DIWF, this specific replica achieves a remarkable milestone in the custom market by weighing in at an astonishingly light 55.8g. Collectors evaluating custom builds frequently praise DIWF for their mastery of this composite material, noting the precise hand-chamfering and polishing that faithfully replicates the genuine DiW aesthetic without compromising structural integrity.
At the heart of this ultra-lightweight chronograph is the highly regarded 4130 clone movement. Unlike inferior modified calibers that increase case proportions, the 4130 architecture ensures a slim profile and full operational integrity of all subdials. The movement features a bidirectional winding module and delivers a power reserve of approximately 36 hours. The integration of this mature caliber allows the piece to maintain the precise mechanical feel of a traditional Daytona while operating within a radically modernized chassis.
Dimensionally, the DIWF IRBIS remains true to the fundamental Daytona lineage with a 41mm case diameter and a confirmed thickness of just 12.1mm. The entire case, fixed tachymeter bezel, and caseback are milled from layered Quartz Fiber, creating a unique visual texture that shifts under different lighting conditions. The dial features striking dark green accent tones, complemented by accurate Chromalight luminescent applications on the indices and hands. Unlike standard 904L Oystersteel models, this piece offers an entirely different, featherweight tactile experience on the wrist.
- Movement: 4130 Clone Caliber — Approximately 36 hours
- Case Material: Quartz Fiber, 41mm diameter, 55.8g total weight
- Bezel: Machined Quartz Fiber with tachymeter scale
- Crystal: Scratch-resistant sapphire with colorless AR coating
- Bracelet: Premium Nylon Velcro strap with composite hardware
- Water Resistance: Stated 30m — professional pressure test recommended before swimming
This piece is tailored for the avant-garde collector who appreciates the mechanical pedigree of the Daytona but desires a highly contemporary, ultra-lightweight aesthetic. It excels in casual and high-activity environments where traditional steel sports watches might feel cumbersome.
-
Original price was: $1,500.00.$1,150.00Current price is: $1,150.00.Model: Daytona
Movement Model: 4130 Movement
Case Size: 40mm -
Original price was: $1,990.00.$1,570.00Current price is: $1,570.00.Sonic Factory Edition — 904L Oystersteel
The Sonic Factory edition of the Artisans de Genève Daytona represents a significant technical leap in the replica market. By abandoning the thicker, less reliable 7750 base used in previous iterations, Sonic has successfully stripped and skeletonized the industry-standard Dandong 4130. This achieves the correct genuine case profile and authentic pusher feel demanded by collectors evaluating mechanical alternatives on strict technical merit.
Powered by the True Dandong 4130 Skeleton caliber, this movement is not merely fitted with a decorative top plate. The mainplate and bridges have been physically milled, beveled, and plated to mimic haute horlogerie finishing. It features a fully functional chronograph with vertical clutch engagement, a column wheel, and a verified 48-hour power reserve, maintaining high stability even with the structural material removed.
The chassis is constructed from 904L Oystersteel, maintaining the exacting 40mm dimensions of the genuine reference. With the traditional dial removed, the movement itself serves as the face, protected by a dual sapphire crystal setup. While some bespoke AdG commissions feature dark green dial accents, this specific execution focuses on the raw, sandblasted metallic architecture of the caliber.
- Movement: True Dandong 4130 Skeleton — 48-hour power reserve
- Case Material: 904L Oystersteel, 40mm diameter, ~135g
- Bezel: 904L Steel or Forged Carbon (variant dependent)
- Crystal: Dual Sapphire (Front & Exhibition Back) with anti-reflective treatment
- Bracelet: 904L Oystersteel, brushed/polished finish, Oysterlock clasp
- Water Resistance: Stated 30m — professional pressure test recommended before swimming
This piece is tailored for the advanced enthusiast who appreciates custom horological modifications. It serves as a striking conversation piece that handles occasional wear, rather than a subtle daily driver.
-
Original price was: $1,999.00.$1,570.00Current price is: $1,570.00.Sonic Factory Edition (904L Oyster Bracelet)
- Movement: Custom Skeletonized Caliber 4130 Clone (~72h Power Reserve)
- Case & Band: 904L Oystersteel with Forged Carbon Bezel (133g, 13.3mm)
- Crystal: Dual Scratch-Resistant Sapphire (Front & Exhibition Back)
- Super Clone Feature: 1:1 Artisans de Genève Hollowed Mainplate with Hand-Polished Chamfers.
100% Customs Clearance Guaranteed. Free replacement if seized.
-
Original price was: $1,890.00.$1,480.00Current price is: $1,480.00.N6F Factory Edition — Oyster Bracelet
The N6F factory release of this modified Daytona addresses a specific niche in the replica market: off-catalog, gem-set configurations that rely on a stable mechanical foundation. By integrating a custom diamond-set bezel and 18K gold plating over a 904L Oystersteel base, this piece targets collectors seeking high-impact aesthetics without the inherent unreliability of heavily modified 7750 movements.
At the core of this N6F build is the 4130 clone caliber, a movement celebrated for its column wheel and vertical clutch architecture that mirrors the genuine Rolex mechanism. This ensures crisp chronograph pusher engagement and stable timekeeping. Per factory specifications for this particular assembly, the power reserve yields approximately 36 hours.
The case maintains the correct 40mm diameter and a highly accurate 12.2mm thickness, a dimension only achievable with the 4130 clone. The dial, occasionally featuring subtle dark green accents depending on the specific sub-variant, displays crisp typography and well-defined sub-dials. The 107.3g overall weight reflects its steel core construction, offering a comfortable wrist presence.
- Movement: 4130 Clone Caliber — Approximately 36 hours
- Case Material: 904L Oystersteel with 18K Gold Plating, 40mm diameter, 107.3g
- Bezel: Custom gem-set synthetic diamond bezel
- Crystal: Scratch-resistant sapphire with correct height profile
- Bracelet: Oysterlock safety clasp with Easylink extension
- Water Resistance: 30m — professional pressure test recommended before swimming
This reference is suited for enthusiasts who appreciate the mechanical integrity of the 4130 clone but desire the visual impact of an off-catalog, gem-set Rolex. It serves as an occasional wear piece rather than a daily driver.
Select options This product has multiple variants. The options may be chosen on the product page -
-
Original price was: $2,300.00.$1,650.00Current price is: $1,650.00.DIWF Edition — Carbon & DLC Steel Bracelet
DIWF’s execution of the DiW “Rose Gold Black Grail” 5711 Nautilus represents a niche but highly sought-after tier of horological modification. Weighing a mere 93.2g, this forged carbon composite build accurately replicates the distinct irregular marbling of the genuine custom piece while maintaining structural integrity.
Driven by the proven Clone Caliber 324, the movement architecture features the correct Gyromax-style balance wheel simulation and perlage finishing on the bridges. Power reserve yields approximately 36 hours, providing reliable daily performance.
The case measures 40mm in diameter with a verified ultra-thin 9.4mm profile, heavily utilizing high-end carbon fiber paired with black-coated stainless steel elements. The dial integrates rose gold-tone markers against a dark textured backdrop, capturing the deep umber and black aesthetic of the original modification.
- Movement: Clone Caliber 324 — Approximately 36 hours
- Case Material: Forged Carbon Fiber & DLC Stainless Steel, 40mm, 93.2g
- Bezel: Forged Carbon Fiber, accurate irregular marbling
- Crystal: Sapphire with colorless AR coating
- Bracelet: Carbon fiber and DLC stainless steel composite links
- Water Resistance: 30m stated — professional pressure test recommended before swimming
This piece serves collectors seeking an avant-garde alternative to traditional steel sports watches. The extreme lightweight profile makes it an exceptionally comfortable daily wearer for modern, casual environments.
Official Contact Only: WhatsApp +44 7410 208835 | Email: support@newcwteam.com
