Related products

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak 15400 Grey Dial

  $1,050.00 Original price was: $1,050.00.$900.00Current price is: $900.00.

  APSF Edition — Integrated Stainless Steel Bracelet

  The APSF Audemars Piguet Royal Oak 15400ST has established itself as a definitive benchmark within the replica community, primarily due to its true 1:1 case construction and the elimination of the Miyota 9015 base. By utilizing a fully integrated clone movement, APSF achieves the exact 9.8mm case thickness and correct crown height of the genuine reference. This architectural precision extends to the movable link design connecting the case head to the bracelet, mirroring OEM assembly methods and allowing for genuine part interchangeability.

  At the core of this reference is the custom clone Caliber 3120 automatic movement. Unlike earlier iterations that relied on decorated plates over standard ebauches, this caliber features a seamless integrated construction that eliminates the noisy unidirectional rotor spin common to Miyota-based replicas. It operates at a smooth 21,600 vph (3Hz), matching the genuine beat rate, and delivers a power reserve of approximately 36 hours. The engraved 22k gold-plated rotor features accurate AP crests, while the movement bridges showcase appropriate perlage and côtes de Genève finishing.

  The 41mm case is milled from high-grade stainless steel, exhibiting the signature Royal Oak alternating brushed and polished finishing. The grey Grande Tapisserie dial is accurately stamped, capturing the intricate square texture and concentric snailed pattern of the original ruthenium dial. The bezel features the iconic octagonal profile with eight polished, white gold-plated hexagonal screws, sitting flush against the brushed surface, protected by a glareproofed sapphire crystal.

  • Movement: Clone AP Caliber 3120 — Approximately 36 hours
  • Case Material: 316L Stainless Steel, 41mm diameter, 51.5mm lug-to-lug, ~165g
  • Bezel: Stainless steel with polished chamfers, accurate screw depth vs. genuine
  • Crystal: Scratch-resistant sapphire with colorless AR coating
  • Bracelet: Integrated stainless steel, brushed finish, AP double folding clasp
  • Water Resistance: 50m stated rating — professional pressure test recommended before swimming

  This reference is ideal for the purist collector seeking exact dimensional accuracy and correct movement architecture. Its versatile 41mm profile and integrated bracelet make it a sophisticated mechanical alternative for both formal and casual horological environments.

  Add to cart

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak Rose Gold 15500 Black Dial

  $1,130.00 Original price was: $1,130.00.$929.00Current price is: $929.00.

  APSF Edition — Black Leather Strap

  The APSF iteration of the Royal Oak reference 15500 represents a notable achievement in replica horology. Recognized among collectors for its precise 10.0mm case thickness, this piece eliminates the dimensional compromises found in earlier iterations by utilizing a custom-engineered movement rather than a decorated base caliber.

  At its core operates the 1:1 Calibre 4302 clone movement. Unlike modified Miyota alternatives, this architecture features the correct 28,800 vph escapement, meticulously engraved bridges, and an accurately skeletonized rose gold rotor. Following standard mechanical clone profiles, it delivers a power reserve of approximately 36 hours.

  The 41mm case is constructed from 316L stainless steel finished with an 18k rose gold plating, exhibiting the signature alternating brushed and polished bevels. The black grande tapisserie dial presents sharp textural depth, occasionally revealing subtle ebony-brown undertones under direct harsh lighting. Fitted to a black leather strap, the total mass measures a verified 109.3g, offering a lighter profile than integrated bracelet variants.

  • Movement: True 1:1 AP Calibre 4302 Clone — Approximately 36 hours
  • Case Material: 18k Rose Gold Plated Steel, 41.0mm diameter, 109.3g weight
  • Bezel: 18k Rose Gold Plated Steel with correct screw alignments
  • Crystal: Scratch-Resistant Sapphire with colorless AR coating
  • Bracelet: Black Leather Strap with rose gold plated deployant clasp
  • Water Resistance: 30m stated rating — professional pressure test recommended before swimming

  This specific configuration is suited for collectors seeking the aesthetic of a precious metal Royal Oak without the substantial weight of a full gold bracelet. It serves as an appropriate dress piece for formal environments.

  Add to cart

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak 15400 Blue Dial

  $1,050.00 Original price was: $1,050.00.$900.00Current price is: $900.00.

  APSF Edition — Integrated Steel Bracelet

  The APSF Audemars Piguet Royal Oak 15400 represents a definitive benchmark in contemporary replica horology, primarily due to its achievement of the genuine-specification 9.2mm case thickness. By engineering a true clone movement from the ground up rather than relying on decorated base calibers, APSF resolves the historical dimensional flaws that plagued earlier iterations of this reference.

  At the core of this reference is the custom Caliber 3120 Super Clone. This integrated architecture accurately positions the balance wheel at the correct 7 o’clock position and operates at a stable 28,800 vph beat rate. The movement delivers reliable daily performance with a power reserve of approximately 36 hours, ensuring consistent amplitude across varying states of wind.

  The 41mm case is machined from 316L stainless steel, weighing in at a verified 173.4 grams, providing a substantial and balanced wrist presence. The dial captures the elusive boutique blue tone of the genuine piece, complementing the crisp execution of the Grand Tapisserie pattern. APSF’s renowned alternating brushed and polished finishing on the integrated bracelet links ensures the dynamic light play characteristic of the Royal Oak design.

  • Movement: SA3120 Super Clone — Approximately 36 hours
  • Case Material: 316L Stainless Steel, 41mm diameter, 173.4g
  • Bezel: 316L Stainless Steel with brushed finish and polished chamfers
  • Crystal: Scratch-resistant Sapphire with Colorless AR
  • Bracelet: Integrated 316L Steel, alternating finish, double deployant clasp
  • Water Resistance: 50m stated rating — professional pressure test recommended before swimming

  This piece is engineered for the collector who demands exacting case proportions and a fully integrated movement architecture. It serves as a highly capable daily wearer that honors the technical specifications of the original reference.

  Add to cart

• 

  Audemars Piguet Super Clone Watches 1:1 Royal Oak Frost 15500 Grey Dial

  $1,200.00 Original price was: $1,200.00.$980.00Current price is: $980.00.

  APSF Edition — Integrated Frosted Stainless Steel Bracelet

  The hammered-gold “Florentine Finish” is notoriously difficult to replicate, but APSF has achieved a highly commendable execution on this Royal Oak 15500. By meticulously applying the micro-hammering technique to the stainless steel case and bracelet, the factory successfully mimics the diamond-dust light play of the genuine article without compromising the structural integrity of the iconic octagonal geometry.

  Powered by the APSF custom Caliber 4302 automatic clone, this piece moves away from decorated Miyota bases found in earlier iterations. The movement features the correct 32mm diameter architecture and a beautifully skeletonized 22K-toned rotor. As a standard clone caliber, it delivers a power reserve of approximately 36 hours.

  The 41mm case maintains a highly accurate profile, integrating seamlessly with the frosted bracelet. The slate grey dial features the signature Grande Tapisserie pattern, with precise applied baton hour markers and the AP logo. Alternating brushed and polished bevels on the bezel edge provide the necessary contrast to the frosted top surfaces.

  • Movement: Caliber 4302 Clone — Approximately 36 hours
  • Case Material: Frosted stainless steel, 41mm diameter, ~10.4mm thickness
  • Bezel: Frosted stainless steel with polished octagonal bevels
  • Crystal: Sapphire crystal with colorless anti-reflective coating
  • Bracelet: Integrated frosted stainless steel with AP double deployant clasp
  • Water Resistance: 50 meters — a professional water-resistance check is recommended before submersion. Avoid using the pushers or crown while the watch is under water.

  This visually arresting piece is suited for collectors who appreciate avant-garde metallurgical finishing. It serves as a striking statement piece that demands attention under direct lighting.

  Add to cart