Daytona Super Clone

126500LN Panda, 126519LN & 126529LN Le Mans — Clone Cal.4130 & 4131 Guide

The Rolex Daytona super clone collection — built around the column-wheel chronograph architecture of the clone Cal. 4130 and current-generation 4131, with correct sub-dial register spacing, ceramic tachymeter bezel, and 904L Oystersteel case and bracelet. Each reference is evaluated against genuine Daytona specifications for pusher feel, sub-dial printing geometry, and rehaut engraving depth before it enters our catalogue.

The Daytona remains the most technically complex Rolex reference to replicate accurately. The primary differentiator between factory tiers is the chronograph mechanism: top-tier clones use a column-wheel with vertical clutch engagement, producing the smooth, zero-lag pusher response of the genuine Cal. 4130. Lower-grade pieces use a cam-actuated lever mechanism with perceptible pusher resistance. Every Daytona in this collection uses column-wheel architecture.

Rolex Daytona Super Clone References

Daytona 116500LN “Panda” / “Darth Vader” — Previous-generation steel reference, clone Cal. 4130, black ceramic tachymeter bezel, white dial (“Panda”) or black dial (“Darth Vader”) configuration, 904L Oystersteel Oyster bracelet
Daytona 126500LN “Panda” — Current-generation steel flagship, clone Cal. 4131, black ceramic tachymeter bezel with polished steel outer lip, white dial with black sub-registers, 904L Oystersteel Oyster bracelet
Daytona 126506 — Platinum case, chestnut brown ceramic tachymeter bezel, ice blue dial with matching sub-dial rings, clone Cal. 4131, Oyster bracelet
Daytona 126519LN — White gold case, black ceramic tachymeter bezel, clone Cal. 4131, Oysterflex rubber bracelet
Daytona 126529LN “Le Mans” — Le Mans centenary edition, white gold case, black ceramic tachymeter bezel, black dial, clone Cal. 4131, Oyster bracelet

Clone Cal. 4130 vs 4131 — What Changed

The genuine Rolex updated the Daytona from Cal. 4130 to 4131 with the 126500 series in 2023. The primary change was skeletonised bridge architecture reducing movement weight, revised chronograph reset mechanism for faster sub-dial return, and Syloxi silicon hairspring replacing the Parachrom unit. Our clone 4131 replicates the updated bridge layout and reset behaviour. Both calibres share the column-wheel vertical clutch architecture.
Clone versions are rated at approximately 60 hours power reserve.

Collector Notes on Daytona Super Clone Quality

The three inspection priorities on any Daytona super clone are sub-dial register geometry, tachymeter bezel graduation, and pusher action. Sub-dial centres must sit at correct radial distances from the main dial centre — off-axis registers are the most immediately visible defect when comparing against a genuine reference. The ceramic tachymeter scale is evaluated for consistent numeral line weight and correct serif proportions at the 400-mark graduation. Pushers are tested for smooth, spring-loaded return without lateral play.

Rehaut engraving carries the serial number repeated at each minute marker around the inner chapter ring. Engraving depth and character spacing are checked against genuine reference photographs as part of our pre-shipment quality control process.

84 Products

Filters

Rolex Super Clone Watches 1:1 Daytona m126502-0001 4131 Movement
Original price was: $1,950.00.Current price is: $1,249.00.
CBD Factory Edition — Oyster Bracelet

The CBD Factory execution of the Ref. 126502-0001 represents a highly specific horological benchmark, capturing the rare 2026 “Albino” concept. This release is distinctly notable across replica forums for its ambitious integration of a simulated Grand Feu enamel dial and a unique Anthracite Cerachrom bezel, elements previously unseen in standard steel Daytona clones.

Powering this reference is the Calibre 4131 clone movement, updated to reflect the latest generation of Rolex chronographs. It features a true column wheel and vertical clutch architecture, ensuring the central chronograph hand engages without the stutter common to modified 7750 calibers. All components are assembled under our strict QC standards to ensure optimal mechanical stability.

The case measures a precise 40mm in diameter and 12.0mm in thickness, machined from 904L Oystersteel with platinum-plated outer bezel and caseback rings to simulate the genuine Rolesium construction. The pure white dial eliminates traditional contrasting sub-dial rings, relying on the jade-like luster of the glass-vitrified surface and the vintage-inspired horizontal tachymeter text to complete the aesthetic.

Movement: Calibre 4131 Clone — Approximately 36 hours

Case Material: 904L Oystersteel & Platinum Plating (Rolesium simulation), 40mm diameter, 150g weight

Bezel: Anthracite Cerachrom ceramic with horizontal tachymeter orientation

Crystal: Sapphire with anti-reflective coating and display caseback

Bracelet: 904L Oystersteel, Oysterlock clasp with 5mm Easylink extension

Water Resistance: 30m — we advise a professional pressure test before any water exposure. Keep the crown and pushers untouched while the watch is underwater.

Designed for the collector who appreciates esoteric Daytona references and vintage-inspired dial layouts. The inclusion of a display caseback and enamel-style dial makes this a distinct alternative to standard ceramic models.
Add to cart
Rolex Super Clone Watches 1:1 Le Mans Daytona 100 Years Anniversary Rose Gold 4132 Movement
Original price was: $1,999.00.Current price is: $1,549.00.
Q-Factory V9 2026 Edition — 18K Everose Gold · ~170g Verified Platform

The Q-Factory V9 Everose edition resolves the three challenges of the Le Mans reference at once: a tungsten-core construction achieving ~170g, the JH4132-FS free-sprung movement whose balance architecture is correct for the sapphire exhibition caseback, and a true 24-hour counter at the 9 o’clock position that distinguishes this from all standard 4130 Daytona clones. Finished in double-layer 18K Everose gold PVD on case and bracelet.

Independent testing of the JH4132-FS platform: 0 seconds/day rate, 329° amplitude, 0.2ms beat error. Full movement review (white gold ref.) →

<br />

Movement: JH4132-FS — Free-Sprung Calibre 4132 Clone | 24-hour counter | ~36 hrs power reserve

Timegrapher: 0 s/day · 329° amplitude · 0.2ms beat error

Case: Tungsten-Core 904L Steel · 18K Everose PVD · 40mm · 46.5mm L-t-L · 11.9mm · ~170g

Caseback: Sapphire exhibition caseback — correct to the Le Mans specification

Bezel: Black Cerachrom ceramic · platinum-dust tachymeter · red ceramic “100” indication

Crystal: Scratch-resistant sapphire with anti-reflective coating

Bracelet: Tungsten-core center links · 18K Everose PVD · Oysterlock clasp · 5mm Easylink

Water Resistance: 30m / 3 ATM — do not operate pushers or crown while submerged.

The tungsten-core bracelet engineering — steel-shell encasing the tungsten rather than bare tungsten plated directly — ensures the Everose PVD adheres correctly and holds under long-term wear conditions.
Add to cart
Rolex Super Clone Watches 1:1 Daytona 18K Yellow Gold Plating M126508-0008 4131 Movement
Original price was: $1,949.00.Current price is: $1,349.00.
Q-Factory 2026 Edition — Oyster Bracelet

Q-Factory’s 2026 release of the 126508 Daytona addresses the primary historical limitation of precious metal replicas: mass. By integrating a high-density tungsten-steel alloy core, this edition achieves an approximate weight of 180 grams, closely mimicking the tactile heft of genuine 18K yellow gold. This engineering choice resolves the lightweight “tell” that has traditionally plagued gold-plated chronographs in the replica market.

At the core operates the replicated Calibre 4131, updating the previous 4130 architecture to reflect Rolex’s newest generation of movements. It features a fully functional vertical clutch and column wheel for crisp pusher engagement, delivering approximately 36 hours of power reserve. The rotor and bridge finishing have been modified to match the updated aesthetics of the genuine 4131 caliber.

The 40mm case is constructed from 904L Oystersteel infused with tungsten, finished in a 5-layer 18K yellow gold PVD treatment to ensure correct tone accuracy without excessive brassiness. The sunburst green dial captures the precise Rolex Green hue, complete with accurate red sub-dial accents and well-defined Chromalight indices.

Movement: Clone Calibre 4131 — Approximately 36 hours

Case Material: Tungsten-infused 904L Steel, 40mm diameter, 46.5mm lug-to-lug, approx. 180g

Bezel: 18K Yellow Gold PVD plated, engraved tachymetric scale

Crystal: Scratch-resistant sapphire with anti-reflective coating

Bracelet: Oyster bracelet, 18K Yellow Gold PVD, Oysterlock clasp with Easylink

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This piece is engineered for collectors who require the physical presence of a solid gold timepiece. The substantial weight provides immediate tactile validation on the wrist, making it a compelling alternative to the genuine article.
Add to cart
Rolex Super Clone Watches 1:1 Daytona 18K Yellow Gold Plating M126518LN-0014 4131 Movement
Original price was: $1,949.00.Current price is: $1,349.00.
Q-Factory 2026 Edition — Oysterflex Strap

Q-Factory addresses the primary critique of precious metal Daytona replicas by integrating a high-density tungsten-steel alloy case. Weighing in at 150 grams, this specific M126518LN reference mitigates the top-heavy imbalance typically felt on lighter Oysterflex replicas, providing the tactile heft of genuine 18K gold.

The time-keeping architecture relies on the clone Calibre 4131 movement. It features a functioning vertical clutch for smooth chronograph actuation and maintains the correct sub-dial layout. Power reserve is rated at approximately 36 hours.

The case profile accurately mirrors the updated 126518LN dimensions, wrapped in a double-layer 18K yellow gold PVD treatment to achieve the correct 2N tone. Its vibrant turquoise blue lacquer dial displays precise color accuracy, contrasted by black sub-registers and a sharp Cerachrom ceramic bezel.

Movement: Clone Calibre 4131 — Approximately 36 hours

Case Material: Tungsten-Steel alloy, 40mm, 46.5mm lug-to-lug, 150g

Bezel: Black Cerachrom ceramic, gold-filled tachymeter

Crystal: Sapphire with anti-reflective coating

Bracelet: Oysterflex elastomer with 18K YG plated Oysterlock clasp

Water Resistance: 50m stated — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference serves collectors seeking the tactile authority of a solid gold piece without compromising on the vivid aesthetic of the turquoise dial. The tungsten construction ensures it wears with deliberate presence rather than feeling like a lightweight placeholder.
Select options This product has multiple variants. The options may be chosen on the product page
Rolex Super Clone Watches 1:1 Panda Daytona M126500LN-0001 4131 Movement
Original price was: $1,950.00.Current price is: $1,249.00.
VSF Edition — 904L Oyster Bracelet

VSF’s iteration of the 2023 Rolex Daytona 126500LN refines the mechanical standard for the modern Cosmograph. This specific batch introduces the fully updated steel-rimmed ceramic bezel and genuine 904L Oystersteel construction, resolving previous discrepancies in case profile dimensions.

Inside beats the Dandong Calibre 4131 Super Clone. This architecture features a true vertical clutch and column wheel, distinguishing it from modified 7750 adaptors and offering superior engagement feel compared to rival Shanghai variants.

The 39.88mm case integrates the updated monobloc middle case geometry flawlessly. The crisp white Panda dial features applied indices filled with Chromalight, though horologists may note the white lacquer leans slightly cooler than the genuine reference.

Movement: Dandong Calibre 4131 Super Clone — 60+ Hours (Dandong clone caliber)

Case Material: Solid 904L Oystersteel, 39.88 mm diameter, 46.5 mm lug-to-lug, ~143g

Bezel: Black Cerachrom ceramic with correct 904L steel outer rim

Crystal: Scratch-resistant sapphire with double anti-reflective coating

Bracelet: 904L Oystersteel, brushed and polished finish, Oysterlock safety clasp

Water Resistance: Pressure Tested to 50 Meters — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This piece serves collectors seeking mechanical fidelity in the latest 126500LN architecture. The integration of the Dandong 4131 ensures reliable daily operation under demanding chronograph usage.
Add to cart
Rolex Super Clone Watches 1:1 Daytona M126500ln-0002 4131 Movement
Original price was: $1,950.00.Current price is: $1,249.00.
VSF Edition — Oyster Bracelet

The VSF 126500LN represents a critical turning point in Daytona replica production, decisively outperforming competitors through its proprietary movement architecture. Widely recognized on horological forums as the current benchmark for the modern black-dial Daytona, this edition resolves the hollow center pinion flaw that plagued earlier iterations.

At the core of this piece is the exclusive Dandong 4131 clone caliber, a significant upgrade over the Shanghai variants used by rival factories. It features correct KIF shock absorbers, superior Côtes de Genève finishing, and operates with remarkable stability. Power is delivered efficiently, ensuring the chronograph functions cleanly without draining the mainspring prematurely.

The 40mm case is forged from solid 904L Oystersteel and achieves the exact 11.9mm profile of the genuine article. The ink black lacquer dial exhibits the correct deep, glossy wet appearance, complemented by silver sunburst sub-dials that avoid the notorious purple reflection flaw. The Chromalight lume application is precise, glowing a consistent blue.

Movement: Dandong 4131 (VS4131) Auto Chronograph — 60+ Hours (Dandong clone caliber)

Case Material: 904L Oystersteel, 40mm diameter, 46.5mm lug-to-lug, ~140g

Bezel: Cerachrom Ceramic with platinum dust filled engravings

Crystal: Scratch-resistant sapphire with inner AR coating

Bracelet: 904L Oystersteel, brushed/polished finish, Oysterlock clasp with Easylink

Water Resistance: 30m rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the discerning collector who demands mechanical integrity alongside visual accuracy. This versatile chronograph transitions seamlessly from motorsport environments to formal settings.
Add to cart
Rolex Super Clone Watches 1:1 Le Mans Daytona 100 Years Anniversary M126529LN 4132 Movement
Original price was: $1,999.00.Current price is: $1,499.00.
Q-Factory V9 2026 Edition — Sapphire Caseback · 174g Verified

The Q-Factory V9 “Ultra-Weight” 2026 edition addresses the three critical challenges of replicating the 126529LN simultaneously: a scale-verified 174g through tungsten-core bracelet link construction, a JH4132-FS free-sprung movement that eliminates the caseback tell, and the correctly replicated sapphire exhibition caseback that the genuine Le Mans uniquely carries.

The JH4132-FS features the correct gearing to drive a true 24-hour counter at the 9 o’clock position — not the 12-hour totalizer found in all standard Daytona 4130 clones. Independent testing returned 0 seconds/day rate, 329° amplitude, 0.2ms beat error. Read the full technical review →

The 39.1mm case carries the reverse Panda “Paul Newman” dial with pearlescent white subdials and the centenary red “100” ceramic bezel marker. Chromalight indices and hands ensure strong low-light legibility.

Movement: JH4132-FS — Free-Sprung Calibre 4132 Clone | 24-hour counter | ~36 hours power reserve

Timegrapher: 0 s/day · 329° amplitude · 0.2ms beat error

Case: High-Density Alloy / 904L Oystersteel · 39.1mm · 47.6mm L-t-L · 11.8mm thick · 174g (scale-verified)

Caseback: Sapphire exhibition caseback — correct to the genuine 126529LN specification

Bezel: Black Cerachrom ceramic · platinum-dust tachymeter · red ceramic “100” indication

Crystal: Scratch-resistant sapphire with anti-reflective coating

Bracelet: Tungsten-core polished center links · 904L Oystersteel shell · Oysterlock safety clasp · 5mm Easylink extension

Water Resistance: 30m / 3 ATM — professional pressure test recommended before swimming. Do not operate chronograph pushers or crown while submerged.

Designed for collectors who require tactile and mechanical authenticity together. The tungsten-core bracelet engineering makes the 174g feel dense and purposeful rather than uniformly heavy — a distinction from any previous weighted Daytona replica.
Add to cart
Rolex Super Clone Watches 1:1 Le Mans Daytona 100 Years Anniversary 18K Gold 4132 Movement
Original price was: $1,999.00.Current price is: $1,549.00.
Q-Factory V9 2026 Edition — 18K Yellow Gold · ~170g Verified Platform

The Q-Factory V9 yellow gold edition applies the same tungsten-core platform to the 126528 reference: a construction-verified ~170g total mass, the JH4132-FS free-sprung movement — architecturally correct through the sapphire exhibition caseback — and a true 24-hour counter at 9 o’clock that sets the Le Mans reference apart from all standard Daytona 4130 clones. The case and bracelet are finished in double-layer 5-mil 18K yellow gold PVD.

JH4132-FS platform testing: 0 seconds/day rate, 329° amplitude, 0.2ms beat error. Full movement review (white gold ref.) →

Movement: JH4132-FS — Free-Sprung Calibre 4132 Clone | 24-hour counter | ~36 hrs power reserve

Timegrapher: 0 s/day · 329° amplitude · 0.2ms beat error

Case: Tungsten-Core 904L Steel · Double-Layer 18K Yellow Gold PVD · 40mm · 46.5mm L-t-L · 12.2mm · ~170g

Caseback: Sapphire exhibition caseback — correct to the Le Mans specification

Bezel: Black Cerachrom ceramic · platinum-dust tachymeter · red ceramic “100” indication

Crystal: Scratch-resistant sapphire with anti-reflective coating

Bracelet: Tungsten-core center links · 18K Yellow Gold PVD · Oysterlock clasp · 5mm Easylink

Water Resistance: 50m — do not operate pushers or crown while submerged.

The tungsten-core bracelet link construction — steel-shell over tungsten — ensures correct PVD adhesion and long-term finish durability. Deep impacts will expose the steel-tone base: a characteristic of all PVD-finished precious metal replicas.
Add to cart
Rolex Super Clone 1:1 Daytona 18k gold m126503-0001 White Dial 4131 movement
Original price was: $1,829.00.Current price is: $1,229.00.
VSF Edition — Two-Tone Oyster Bracelet

VSF’s iteration of the updated 126503 Daytona reference establishes a strict benchmark for two-tone chronographs. By achieving the exact 12.0mm case thickness of the genuine article, this piece resolves the historical bulkiness associated with older replica generations. The resulting profile sits flush against the wrist, mirroring the refined geometry of the modern Rolesor case.

Inside sits the highly regarded Dandong Calibre 4131 clone movement, featuring a functional vertical clutch and column wheel architecture. Unlike standard mechanical chronographs, this mechanism provides crisp pusher engagement without the seconds-hand stutter upon activation. Thanks to the optimized mainspring barrel, it delivers a reliable 60+ Hours (Dandong clone caliber) of continuous operation.

Constructed from 904L Oystersteel, the case and bracelet utilize a 5-layer 18K yellow gold PVD process to accurately replicate the two-tone aesthetic. The crisp white dial features correctly proportioned sub-dials with concentric azurage texture, complemented by Chromalight-filled appliques that provide a consistent blue emission in low-light environments.

Movement: Dandong Calibre 4131 Clone — 60+ Hours (Dandong clone caliber)

Case Material: 904L Oystersteel, 40mm diameter, 46.5mm lug-to-lug, 145g

Bezel: 18K Yellow Gold PVD, engraved tachymetric scale

Crystal: Scratch-resistant sapphire with anti-reflective coating

Bracelet: Two-tone Oyster bracelet with folding Oysterlock safety clasp

Water Resistance: 30m stated — professional pressure test recommended before swimming

This reference suits collectors who appreciate the classic Rolesor visual profile but seek a mechanically robust alternative for regular rotation. The integration of the Dandong movement ensures long-term reliability without compromising case proportions.
Add to cart
Rolex Super Clone Watches 1:1 Daytona Silver Dial M126509-0003 4131 Movement
Original price was: $1,889.00.Current price is: $1,389.00.
VSF Edition — Oyster Bracelet

The VSF 126509 represents a significant structural shift in Daytona replication, utilizing a high-density Tungsten-alloy architecture to achieve a net weight of approximately 180 grams. This directly addresses the traditional weight deficit of standard 904L Oystersteel cases, delivering a tactile presence closely mirroring genuine 18K white gold.

At its core operates the VSF Calibre 4131, a meticulous Dandong clone of the latest generation Rolex chronograph mechanism. It features the updated skeletonized rotor and refined bridge architecture, distinguishing itself from older 4130 derivatives while maintaining a robust power reserve.

The silver sunburst dial is executed with high fidelity, offering the correct warm-silver tone contrasted by deep black subdials and active Chromalight luminescence. The exterior is finished with an 18K white gold PVD treatment, providing a slightly warmer luster than cold standard steel.

Movement: VSF Calibre 4131 — 60+ Hours (Dandong clone caliber)

Case Material: Tungsten-Steel alloy with 18K WG PVD, 40mm diameter, 46.5mm lug-to-lug, 180g weight

Bezel: Fixed Tungsten-alloy with 18K WG PVD, engraved tachymetric scale

Crystal: Scratch-resistant sapphire with internal AR coating

Bracelet: Tungsten-weighted Oyster bracelet with Oysterlock safety clasp

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the horological purist who demands tactile accuracy alongside visual fidelity. The weighted case provides an authentic wearing experience suited for formal and demanding environments.
Add to cart
Rolex Super Clone Watches 1:1 Daytona Rose Gold M126515ln-0004 4131 Movement
Original price was: $1,949.00.Current price is: $1,349.00.
VSF Edition — Oysterflex Elastomer Strap

The VSF 126515LN represents a notable horological shift in replicating precious metal chronographs, primarily through its 137-gram tungsten-alloy core. By mimicking the density of solid 18K gold, this weighted edition resolves the tactile discrepancy that has historically compromised Everose replicas on elastomer straps.

At the heart of this reference is the highly regarded Dandong 4131 clone caliber, engineered with a true vertical clutch and column wheel architecture. This mechanism ensures crisp chronograph engagement without the seconds-hand stutter typical of modified ETA bases, while delivering a robust 60+ Hours (Dandong clone caliber) power reserve.

The 40mm case features a double-layer Everose PVD coating to accurately replicate the warm copper-gold tone of the genuine article. It frames a complex black and sundust dial, utilizing synthetic baguette and brilliant-cut markers that align precisely with strict quality benchmarks.

Movement: Dandong 4131 Automatic Chronograph — 60+ Hours (Dandong clone caliber)

Case Material: Tungsten-Steel Alloy with 18K Everose PVD, 40mm diameter, 46.5mm lug-to-lug, 137g weight

Bezel: Black Cerachrom Ceramic with Everose PVD filled numerals

Crystal: Scratch-resistant Sapphire with internal AR coating

Bracelet: Oysterflex elastomer strap with Everose PVD Oysterlock clasp

Water Resistance: 30m (Stated) — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This weighted reference appeals to discerning collectors who require the specific on-wrist heft of a precious metal Daytona without the substantial financial exposure of the authentic piece.
Select options This product has multiple variants. The options may be chosen on the product page
Rolex Super Clone Watches 1:1 Daytona 18k Gold M126518ln-0006 4131 Movement
Original price was: $1,949.00.Current price is: $1,349.00.
Q-Factory 2026 Edition — Elastomer Rubber Strap

The replica market has long struggled to replicate the tactile authority of solid precious metal chronographs. The Q-Factory (QF) edition of the Rolex Daytona M126518LN addresses this core horological deficit by utilizing a proprietary Tungsten-Steel alloy case construction. By achieving a net weight of approximately 155 grams, this reference effectively mirrors the specific heft of the genuine 18K yellow gold model on an Oysterflex strap, eliminating the lightweight feel that betrays standard 904L steel replicas.

Internally, the timepiece is driven by the Clone Calibre 4131 automatic chronograph movement. This updated mechanism mirrors the genuine architecture with a functional vertical clutch and column wheel, ensuring precise engagement of the chronograph seconds hand without the initial stutter found in modified 7750 calibers. Per strict replica testing standards, the power reserve yields approximately 36 hours of continuous operation when fully wound.

The visual profile is defined by a double-layer PVD application infused with 18K yellow gold, providing a durable and tonally accurate finish across the 40mm case and clasp. The ‘Bright Black & Golden’ dial features a deep lacquer finish contrasted by crystalline sub-dials and eight brilliant-cut simulated diamond hour markers. Chromalight-style luminescence is applied to the hands for low-light legibility, while the black ceramic bezel insert features correctly recessed and plated tachymetric scale numerals.

Movement: Clone Calibre 4131 Automatic Chronograph — Approximately 36 hours

Case Material: Tungsten-Steel Alloy with 18K YG PVD, 40mm diameter, ~46.5mm lug-to-lug, ~155g

Bezel: Black Ceramic (Cerachrom equivalent) with gold-plated engravings

Crystal: Sapphire with colorless anti-reflective coating

Bracelet: Black elastomer rubber strap with 18K YG PVD Glidelock-style clasp

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This weighted reference is engineered specifically for collectors who demand the correct physical mass of a precious metal timepiece. It is best suited for those who appreciate high-density case architecture and are willing to maintain a plated finish.
Select options This product has multiple variants. The options may be chosen on the product page
Rolex Super Clone Watches 1:1 Daytona M126519ln-0004 4131 Movement
Original price was: $1,949.00.Current price is: $1,349.00.
Q-Factory 2026 Edition — Oysterflex Elastomer Strap

The Q-Factory 126519LN addresses the primary tactile limitation of precious metal replicas by utilizing a high-density tungsten-steel alloy. By achieving a net weight of approximately 155 grams, this edition mimics the cold, dense heft of solid 18K white gold, eliminating the immediate weight discrepancy found in standard 105g steel alternatives. This engineering choice establishes it as a horological benchmark for collectors seeking an accurate ‘stealth wealth’ profile.

At the core of this reference is the updated Calibre 4131 Super Clone automatic chronograph movement. It features the revised bridge architecture and optimized vertical clutch system, ensuring precise engagement of the chronograph without the seconds-hand stutter typical of lower-tier mechanisms. Power reserve is regulated to approximately 36 hours, providing stable torque delivery across its operational range.

The Bright Black and steel dial layout is punctuated by eight brilliant-cut simulated diamonds set within 18K white gold chatons. The 40mm case is treated with a double-layer white gold PVD to replicate the specific luster of genuine Rolex precious metal, while the black Cerachrom bezel features correctly recessed platinum-dusted tachymetric graduations.

Movement: Calibre 4131 Super Clone Chronograph — Approximately 36 hours

Case Material: Tungsten-Steel Alloy (18K WG PVD), 40mm, ~46.5mm lug-to-lug, ~155g

Bezel: Black Cerachrom with platinum PVD numerals

Crystal: Scratch-resistant sapphire with inner AR coating

Bracelet: Oysterflex elastomer strap with Glidelock deployant clasp

Water Resistance: Stated 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Tailored for the enthusiast who requires the physical density of a white gold reference without the genuine premium. The Oysterflex configuration ensures a subdued profile appropriate for both casual and measured professional environments.
Select options This product has multiple variants. The options may be chosen on the product page
Rolex Super Clone Watches 1:1 Daytona 18k Gold M126518ln-0008 4131 Movement
Original price was: $1,949.00.Current price is: $1,349.00.
Q-Factory Edition — Oysterflex-Style Elastomer Strap

Q-Factory has addressed the primary tactile tell of precious metal replicas with this release of the Daytona reference 126518LN. By engineering the case from a high-density tungsten-steel alloy, this iteration achieves a net weight of approximately 155 grams, effectively bridging the mass disparity between standard 904L Oystersteel replicas and the solid 18K yellow gold genuine article.

Inside operates the clone Calibre 4131 automatic chronograph mechanism. It features a fully functional vertical clutch and column wheel architecture, ensuring crisp pusher engagement without the characteristic seconds hand stutter found in modified 7750 movements. Power reserve is rated at approximately 36 hours.

The 40mm case utilizes a double-layer PVD process infused with real 18K yellow gold to replicate the distinct hue of Rolex’s proprietary alloy. The ‘Golden Noir’ dial presents a highly accurate bright black lacquer base contrasted by golden sub-dials, with indices filled with genuine-spec Chromalight for long-lasting blue luminescence.

Movement: Clone Calibre 4131 — Approximately 36 hours

Case Material: Tungsten-Steel Alloy (18K Gold PVD), 40mm, ~46.5mm lug-to-lug, 155g

Bezel: Black Cerachrom ceramic with PVD gold filled numerals, accurate genuine-spec tone

Crystal: Scratch-resistant sapphire with colorless anti-reflective coating

Bracelet: High-performance elastomer with internal metal blades, Oysterlock clasp

Water Resistance: 30m stated rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

This reference is tailored for the horological enthusiast seeking the correct specific gravity and wrist presence of a solid gold chronograph. The added tungsten mass completely eliminates the hollow tactile sensation commonly associated with standard steel replicas.
Select options This product has multiple variants. The options may be chosen on the product page
Rolex Super Clone Watches 1:1 Daytona Rose Gold M126515ln-0006 4131 Movement
Original price was: $1,849.00.Current price is: $1,349.00.
QFactory Weighted Edition — Oysterflex Elastomer

QFactory addresses the primary tactile flaw of precious metal replicas by integrating a tungsten-alloy core into the 126515LN mid-case. This engineering choice elevates the total mass to approximately 150 grams, closely mirroring the heft of genuine 18k rose gold and providing collectors with a historically elusive weight accuracy.

Driven by the latest Caliber 4131 clone, this iteration faithfully reproduces the updated skeletonized rotor and bridge architecture introduced in the genuine 126xxx series. The vertical clutch mechanism ensures precise chronograph engagement without the stutter typical of modified 7750 calibers. Power reserve is approximately 36 hours.

The 40mm case is finished with an 18k rose gold plating over the dense tungsten foundation, paired with a scratch-resistant Cerachrom ceramic bezel. The dial features the correct Sundust metallic finish with snailed black sub-dials, accented by applied gold markers and blue Chromalight luminescence.

Movement: Caliber 4131 Clone — Approximately 36 hours

Case Material: Tungsten Alloy Core with 18k Rose Gold Plating, 40mm, ~150g

Bezel: Black Cerachrom Ceramic

Crystal: Scratch-proof Sapphire with AR coating

Bracelet: Oysterflex elastomer with Glidelock clasp

Water Resistance: Stated 30m — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for enthusiasts who require the tactile weight of precious metal alongside modern horological architecture. The Oysterflex configuration provides a balanced fit for both sporting and formal applications.
Select options This product has multiple variants. The options may be chosen on the product page
Rolex Super Clone Watches 1:1 Daytona M126519LN-0006 4131 Movement
Original price was: $1,889.00.Current price is: $1,289.00.
VSF Edition — Oysterflex Strap

The VSF M126519LN “Ghost” addresses a critical shortfall in standard Daytona replicas by integrating a high-density tungsten-alloy core. This engineering choice elevates the overall mass to approximately 136g, closely mirroring the tactile heft of genuine 18K white gold. It provides a balanced counterweight to the Oysterflex strap, eliminating the top-heavy feel often associated with lighter 100g steel alternatives.

At the heart of this reference operates the Dandong clone 4131 caliber, a notable progression in replica chronograph architecture. It features a single-piece balance bridge and genuine-spec shock absorbers, ensuring long-term operational stability. This movement delivers a robust power reserve while maintaining precise timing tolerances.

The 40mm case maintains the exact 11.4mm gen-spec profile, machined from a tungsten-steel alloy to achieve its density. The steel and silver sunburst dial features deep black sub-dials, accurately capturing the low-contrast monochromatic aesthetic. A black Cerachrom ceramic bezel and bright Chromalight luminescence complete the authentic visual signature.

Movement: Dandong 4131 Clone — 60+ Hours (Dandong clone caliber)

Case Material: Tungsten-Steel Alloy, 40mm diameter, 46.5mm lug-to-lug, ~136g weight

Bezel: Black Cerachrom Ceramic, platinum-dusted tachymetric scale

Crystal: Sapphire with double-sided colorless AR coating

Bracelet: Black elastomer Oysterflex with Glidelock deployant clasp

Water Resistance: 30m Rating — professional pressure test recommended before swimming. Do not operate chronograph pushers or the crown while the watch is submerged.

Designed for the collector who prioritizes tactile accuracy and mechanical reliability. The weighted case and stealthy dial offer an understated presence suitable for both casual and formal environments.
Select options This product has multiple variants. The options may be chosen on the product page

Load More All products loaded.